The resting area is the most important place in the barn for the dairy cow, sometimes called the heart of the free stall system. Inadequate design of the lying area, and lack of or poor quality of bedding materials may reduce the hygiene of the stall. Poor management regarding the cleanliness of the resting area may lead to poor animal hygiene and increased bacterial growth. This in turn will lead to increased risk for environmental mastitis as well as impairing milk quality through contamination with spores. In this literature study the most commonly used bedding materials; straw, sawdust, wood shavings, clean sand, recycled sand, peat and recycled manure solids, are compared to one another with regards to their ability to resist bacterial growth. Effects of adding hydrated lime to bedding materials have also been studied. Most bacteria need humidity and prefer a quite high water activity to be able to grow.

This is a study about how different digital instruments can be used in education for pupils with autism and intellectual disability. The questions formulated to research this chosen area was: ?What does teachers think about digital instruments and interactive teaching materials when it comes to benefits and disadvantages in the classroom?, ?In what ways is digital instruments used as teaching materials in the specific school context? and ?From a perspective of teaching and learning, what kind of problems and opportunities can be gained from using digital instruments and teaching materials?. To gather this information interviews was done with three specialist pedagogues working with the chosen group of pupils at three different schools. The material shows that the specialist pedagogues have positive attitudes towards working with digital instruments in this specific group of students..

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

The survey aims to shed light on traditional and contemporary bottom floor frames, their construction and different insulating materials; mineral wool, wood shavings and charcoal. The purpose is to analyze and discuss the similarities and differences as well as the pros and cons with a focus on the construction and the different insulating materials. The work has been limited to comparing two different wooden floor frames. The first one is based on a real floor frame from an older building, this example is presented as the traditional floor frame in this study and are from around 1940. The other floor frame is presented as a contemporary floor frame and is based on wood building type descriptions and literature.

This is a study about how different digital instruments can be used in education for pupils with autism and intellectual disability. The questions formulated to research this chosen area was: ?What does teachers think about digital instruments and interactive teaching materials when it comes to benefits and disadvantages in the classroom?, ?In what ways is digital instruments used as teaching materials in the specific school context? and ?From a perspective of teaching and learning, what kind of problems and opportunities can be gained from using digital instruments and teaching materials?. To gather this information interviews was done with three specialist pedagogues working with the chosen group of pupils at three different schools. The material shows that the specialist pedagogues have positive attitudes towards working with digital instruments in this specific group of students..

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

The world is facing huge challenges to overcome the climate crisis. A contributing actor to the environmental footprints are the textile industry and their production processes, which highlights the importance to act. The purpose of this study is therefore to investigate how a middle size company's purchase- and design department work to contribute to sustainable fashion and sustainable consumption. As well as to examine the challenges and possibilities that the fashion company faces in its sustainability work. The qualitative study has been prepared and is based on 15 interviews with employees in the purchase- and design department.

In a sustainable society the use of renewable energy and recycling of materials is of high importance. Wastewater treatment plants use large amounts of energy in the processing of wastewater. This study seeks to evaluate wastewater as an energy resource and to examine treatment plants potential to become sustainable energy producers. The study is based upon the internal processes of Himmerfja?rdsverket.

This essay is questioning if the state as an unsecured creditor in a bankruptcy proceeding, according to the principle of equal treatment, has the same rights as the other unsecured creditors. The principle of equal treatment means that creditors with unsecured claims are supposed to have mutually equal rights to dividends in a bankruptcy. In the Swedish bankruptcy law from 1987 there are recycling rules which means that some legal actions taken by the bankrupt debtor before the bankruptcy can be recycled to the bankruptcy estate. These rules do not apply on taxes. This essay analyzes whether the state should have this advantage or not.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

When constructing an industrial- or hall building, the most common framework materials thatis used are wood, steel or concrete. Due to an assignment from Byggnadstekniska Byrån ABhas a document been created that makes it possible to investigate how the final costs is af-fected by gapes in between elements and which used foundation. And this with steel as thematerial. The purpose with this essay is to investigate which is the most well fitted materialwhen constructing an industrial- or hall building wood, steel or concrete. Information aboutthe different materials has been collected by litterateurs and by different internet pages.

When constructing a road the risk of emission of substances from the used materials to the surrounding environment has to be evaluated. The aim of this study is to present a proposal for how to evaluate the risk of contamination as a result of emission from the materials in a road construction. The study is based on literature studies, an inventory and a questionnaire that examines how experts in governmental agencies, industries and universities evaluate the risk of contamination. The inventory indicates that guidelines for evaluating the risk of emission from secondary materials in a road construction do not exist. The conclusions from the questionnaire are: that there is no common way to evaluate the risk of contamination as a result of emission from materials in the road construction, there is no uniform interpretation of the terms "minor" and "significant" risk of contamination and that the evaluation is subjective.

På grund av den globala uppvärmningen och den ökade användningen av plast de senaste årtiondena har plastavfallshantering blivit allt viktigare. Eftersom materialåtervunna produkter sparar material och naturresurser, såsom den olja som används för tillverkning av plast, är denna återvinningsmetod högst aktuell. De begränsningar som finns idag för vad som är möjligt att materialåtervinna gör det allt viktigare att anpassa förpackningar för återvinning bättre. Detta visas tydligt av att de svenska målen för återvinning av hårda plastförpackningar inte uppnås, trots dagens medvetenhet kring miljöproblemen. Denna studie undersöker därför hur Design for Recycling (DfR) kan användas och implementeras på bästa sätt för att stimulera återvinning av hårda konsumentplastförpackningar.Utifrån litterära referenser har en kartläggning av betydelsen av DfR under alla stadier i en produkts livscykel genomförts och genom denna har problemområden identifierats och pågående utveckling inom området urskilts.

The thesis aims to compare differentpiping materials in heating systems interms of cost as well as to illustratethe impact of energy characteristics ofdifferent materials over its servicelife. The methods used for costcalculations regarding piping are alsoto be examined to highlight thedifferences between template basedcalculations and more carefully executedones. The work is delimited to discusspipes of steel, copper, plastics andcomposites. The aim is that the resultcan be compiled to illustrate the prosand cons of various materials whenevaluating investments.The main object of the survey is part ofa heating system in the office-block KVSommaren located in southern Stockholm.The configured piping system is designedwith the mentioned piping materials andis used to make up the data for flow andcost calculations. The differentmaterials are calculated in both aconventional manner with a supplementarycost for additional fittings and with amore accurate quantification of thecomponents.

The aim of this work is to develop new conceptual designs for the fairings that are situated between the fin and the rear fuselage on the new version of the JAS 39 Gripen aircraft, called the Gripen E/F. The designs presented should show a profit in the form of lower weight. To achieve weight loss, the possibilities of using other construction materials other than those which are available at Saab today were studied. Therefore, a material survey was carried out in which the market for modern construction materials was studied to get an idea of today?s level of technology.