With climate change, the temperature and relative humidity in Sweden are increasing. The majority of historical environments lack protection against this increase, which also increases the risk of mold infestation in these environments. One of these environments is N??s Slott, in which several rooms have recurring mold growth on objects and furniture. By examining one of the rooms in the castle that is in the risk zone or has mold growth, factors behind the mold growth can be investigated in order to create a basis for future actions against mold.

In Peru guinea pigs are raised for meat production and salmonellosis is considered as a major problem. Studies have detected salmonella in animals with enteritis and pneumonia. Salmonellosis exists both in an acute and a chronic form. In the rural areas the diagnosis is made according to clinical signs and macro pathological findings at autopsy. The major systems applied for the guinea pig production are often classified as family, family-commercial and commercial. These systems differ in number of animals and how industrialised they are.

This paper aims to, through a literature review, examine how to best design and adapt calf huts to meet the calf's physiological requirements and reduce the infection pressure for enteric and respiratory diseases. It illuminates how the calf relates to different temperatures and climate, which temperature control mechanisms it uses and its ability to perform these regulations, as well as providing a summary of the past decades´ research on the calf huts housing system. These two theory chapters, along with a concluding discussion, provide a better understanding of how to, especially in temperate climates, design the most suitable calf hut, which cater to the calf's both thermal comfort and physical health. The literature suggests that the calf's own temperature control works well to counteract the temperature outside the desired range, and that one of the most important factors rather is ventilation of a calf hut, which reduces moisture and pathogens. The conclusion of this paper is mainly that there is not an obvious way to place and construct a calf hutch and that most design principles contribute to both positive and negative effects simultaneously.

AbstractThe indoor environment affects the human performance. Noise pollution, poor lightning and coloring are some of the factors that affect our work performance. The human is also affected by the air change and temperature, these factors are in most buildings possible to adjust and through this make economic savings. To find out about the indoor environment in the O-building a questionnaire was handed out, measurements/surveys and an interview was also made. 108 questionnaires where handed out to employees and students.

To better understand how various factors affect the establishment of forest and trees around the tree line-ecotone, this study was conducted in Troms County, Norway. The altitude of different forest and tree limits together with the surrounding vegetation type were collected during August 2011. Comparisons of the collected data were made with previously collected data from the same sites conducted 1914 and 1915. On average the forest limit has expanded with 26 meters in altitude, however, an expansion is not statistically significant for the whole area. The tree limit has significantly expanded in altitude.

This report was written as a final thesis within the Department of forest economics at the Swedish University of Agricultural Sciences as a completion of the M.SC Forestry programme. The aim of this study was to create a model that, with respect to given stock levels, temperature, fuel usage and fuel price, would identify the optimal levels for purchase of bio fuels, optimal levels of incineration of bio fuels and the sum of the present values of all costs. The model would be applicable for a larger district heating plant. Data regarding temperature were received from SMHI. Information considering fuel prices was taken from the Swedish Forest Agency and the facts about fuel usage were collected from a large district heating plant, located in the southwest of Sweden. For the temperature, a sinus curve was adapted to describe the temperature over a year.

The dishwasher is a wide spread product that occurs in many households. It saves the user time,water and energy. When using a dishwasher instead of doing dishes by hand a lot of energy issaved.The importance of lowering the energy consumption does not only come from the consumerwinnings but also from an environmental point of view. Scientists are certain that the globalwarming comes from the emission of green house gasses that is created by human consumptionof oil, gas and coal.Dishwashers today are a lot more energy efficient than older dishwashers, but there are stillmargins to lower the energy consumption. The aim with this project is to investigate thedishwasher and it?s washing cycle, noting different phases and components that contribute towaste of energy.

The aims of this project were to describe the circumstances around dogs being left alone in cars, to investigate owners? knowledge of the risks associated with leaving dogs in cars and the relevant legislation and, finally, to study how changes in the air temperature and air composition in the car affect the dog. The project consisted of a survey of the literature, a questionnaire part and an experimental part. An important conclusion is the importance of the level of knowledge of owners, since there are several ways in which an owner can prevent their dog from heat stroke and, in the case of an eventual accident, their action can have direct consequences in minimizing the long-term damage to the dog and even whether or not it survives. Fewer than half of the owners in the study knew that for a dog suffering heat stroke, the most important thing is to bring the body temperature down. Only a third of dog owners knew that if a dog is left in a warm car and showing signs of heat stress, then the police should be contacted and the dog quickly helped out of the car.

Storing kinetic energy in a flywheel allows for more efficient driving of electricvehicles. Research in this area is in progress at Uppsala University, where a flywheelwith magnetic bearings encased in a vacuum chamber is being constructed. To makethis possible methods for measuring the current through the electromagnets in thebearings and temperatures in the flywheel need to be developed. This has been thepurpose of this report. The current measurement resulted in a resistive method, andthe implementation of eight measurement circuits in the system.

Hypothermia during anaesthesia is a well-known phenomenon that may cause several side-effects such as greater risk of postoperative wound infection and increased risk of heart complications. The most efficient way to avoid this is to prevent hypothermia from occurring. The aim of this paper was to compile the research on the most efficient way to prevent hypothermia during anaesthesia for cats and dogs, and to compare these results to how Swedish animal hospitals prevent hypothermia today. To investigate this, a survey was sent out to several animal hospitals around Sweden to see what methods they used to prevent hypothermia in their clinics. It is difficult if not impossible to prevent the body temperature from falling slightly when anaesthesia is induced because of the drug interactions in the body that follow from the drugs given. A 1-1,5°C decrease in body temperature is to be expected and is difficult to avoid.

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

Skin temperature is detected through signals in unmyelinated C-fibers and thin myelinated A?-fibers in the peripheral and central nervous system. Disorders in thin nerve fibres are important and not rare but difficult to diagnose by the most common neurophysiological methods. In this pilot study different methods for quantitative sensory testing, QST, were compared to give some ideas about which method could be the most efficient to use in order to point out injuries of the sensory system in clinical practice. The comparison was made between Békésy (separate warmand cold thresholds) and Marstock test (combined warm and cold thresholds).

Nimo Verken AB is the leading producer in the Scandinavia of drying cabinets. The construction has, with small changes, been the same since the 70s with a thermostat and a timer as controlling system. There was a wish to develop a modern cabinet which showed remaining time on a display and with energy saving functions.In this report we go through how it is possible to implement a digital controlling system, where remaining time is shown on a display and where it is possible to choose a preset ?program?.The report first presents the fundamental theory for a PIC, where we describe the different registers, how interrupts are handled, the internal clock function and how data is sent to control the different parts of the construction.Next the report presents and describes the new hardware that is needed, such as the encoder, the temperature sensor and the display.After the theory we describe how the program in the PIC may be drafted. Last in the report we have the result of the tests of the temperature variations and the accuracy of the time..

Norconsult AB has developed a solarhousing concept, a house designed for the warm climate in the Middle East andwith large quantities of solar panels installed. The cooling system for the house was designed in an earlier report, the purpose of this thesis is to investigate the possibility of short and long term storage of thermal energy via an underground energy storage volume.Two different designs of the storage and three different filling materials have been integrated into a model to simulate different cases. The first design consisted of pipes installed in the ground, without insulation. The second design consisted of an insulated concrete box installed to prevent thermal energy from the surrounding soil to flow towards the lower temperature regions within the storage. The three different filling materials were dry saudi sand, water saturated saudi sand and the filling material used by the client for energy storage in Sweden.The results from the simulations show that neither of the designs, regardless of the filling material, managed to extract enough thermal energy from the house to the ground to uphold the demands of indoor climate.

The aim of these two studies was to investigate the possible physiological, behavioural and emotional changes that appear after human-horse interactions and also to find an explanation to why they occur. One aspect that is discussed is whether the wellbeing of humans can be coupled to interacting with horses and of how the animals respond to the interaction. The first study was performed on 9 horses and their owners, both parts being subjects to registrations during 4 different interaction treatments. The second study was performed on 6 horses with registrations only being performed on the horses during 2 different treatments. Nine horses underwent 3 different treatments all performed by their owners (H = stroking of the horses forehead, B = brushing and M = stimulation of the withers) in addition to a control round (K). Each treatment lasted for 4 minutes but observations were performed until after 45 minutes from start.