The dry period is usually 6-8 weeks and in this period the basis of the performance in the following lactation is settled. In an average herd about 15% of the cows are dry (Marcussen & Krog Laursen, 2008). In many herd the dry cows are set aside, that means setting aside 15% of your herd, at the time when they are preparing for their next lactation. The recommendation for number of groups differs depending on country traditions or reasons for grouping. If you look at recommendation for feeding, some companies selling feeding equipment advocates one group throughout the dry period, but the number differs from one to three.

Jämtkraft AB has recently modernized its hydropower station at Hissmofors by replacing four older worn out units with two new units. The generators uses a concept with sliding stator feet to deal with the thermal movements that occur in the stator during operation when the unit is operating intermittently. At other sites, this method revealed shortcomings in the reliability. This has made Jämtkraft AB feel uncertainty about its function and therefore want to investigate it during an early stage. The generators have a built-in monitoring system for the sliding stator feet and by using data from there the function of the sliding stator feet has been investigated. The study focused on how the different stator feet move relative to each other and how the eccentricity and deviation from roundness changed during operation. The results show that there are several indications that the function of the sliding stator feet is not satisfactory.

This report describes the development of a system for controlling documents. The report starts with a problem description which the company wants an intranet-based solution for. The report then continues to describe the development phase for the different parts of the system which results in a complete system. The company that wanted this system is called Orbit One and is located in Ronneby, Sweden. They have had a problem with old documents circulating in different versions and in different binders.

När man lever i ett samhälle där användandet av mobila enheter som smartphones ökar, sker motsvarande ökning av frågan på tillgång till befintliga system i mobila enheter. Ett mobilt system kan utvecklas på olika sätt beroende på efterfrågan och kunskapsbasen hos utvecklarna. Det finns olika sorters mobila system, däribland webbaserade och plattformsspecifika system.Den här rapporten innehåller en förstudie för olika tillvägagångssätt för att skapa en mobil version av ett system. Rapporten redogör för olika tekniker som kan användas beroende på vilket system som önskas överföras, samt vilken målgruppen är. Rapporten beskriver också hur framtagandet av ett mobilt system för olika mobila plattformar har skett för ett redan befintligt system..

This thesis examines if commercial-of-the-shelf (COTS) systems meet the needs in different types of organizations. This was investigated through a case study of a COTS system. The system is built for contact centers and used in different types of organizations. Contextual inquiries with users from six different organizations were held together with interviews with stakeholders of the system. This gave an understanding for how the system is used and the needs to be met in the different organizations were recognized.

As part of an internship at Ericsson, this report was written to enhance the understanding of how it is to develop a system that is well established at the workplace. To improve an already existing system is not always as easy as many developers may think. In this report the pros and cons of developing an already existing system has been researched and analyzed. Do note that the results are only from one development of a specific system and that comparison of other developments has been made from other reports and not from experiencing it firsthand. It was found that the choices made can have an impact on further developing and it is important to write down what has been done.

This thesis has the overall objective to develop the optimum sealing system between the retarder and transmission. Today, there is a pressure-relief and two radial seals separation between the retarder and transmission. It has been found that carbon residue formation may occur between retarder axle and seal lips with, in some cases, leakage as a result.We have in this thesis tried to explain the phenomenon of carbon residue, how it is formed and why it can be seen just on the seals? A rig test was conducted where we show how friction, speed, transmission temperature and mitigation phases of the retarder affects temperatures in the sealing environment. Factors affecting the coke structure are reported, together with proposals for measures that provide a mitigating seal environment.

This project concentrates on musicians who work in a professional music studio.The task of this project was to design a new headphone system called Foldback system.The advantage of this system is that all involved in a music project could influence their ownlistening during the project. With a couple of adjustments should each and everyone get theirown individual listening from their headphone station.This report shows different methods, theories and results that came along in development ofFoldback system. The project has resulted in a finished product that will be in use atStudiomega..

Knowledge about womens experiences that after a myocardial infarction try to comply with dietary recommendation is relatively unknown today. Scientific studies have concentrated on men as a patient and the woman as a partner when it comes to myocardial infarction. There is a need for qualitative studies to investigate womens perceived and actual support after a myocardial infarction..

The author of this report has created a Web-based invoice system and CRM at therequest of the company Webhouse.se. The purpose of the System is to makeeveryday tasks in the company easier. The system also needed to prevent mistakesand errors by managing orders and invoices.The system has been created with the company?s requests in focus. During thedevelopment of the system information security and interaction design have beenimportant aspects that have been taken into consideration.The system has been created using techniques such as PHP and MYSQL.

In order to reduce the price for, and improve the performance of automatic control systems for magnetization of synchronus generators, the possibilities of using a PC based software PLC system, Programmable Logic Controller, has been investigated. The result is a system based on the CoDeSys software PLC with runtime environment from 3S-Software, communicating with external units via Modbus fieldbus. System price is reduced from ?5000 to ?2000 and system processing speed is reduced from 10 ms for a Siemens S7 PLC to 4 ms with the CoDeSys PLC system though unsolved problems with runtime seizure caused by improper settings in the PC BIOS..

In this thesis a transport system is sought after thatif realised in the city of Uppsala could provide bothwell-being to all its inhabitants and sustainability,here jointly refered to as liveability. It is found thatthe car dominated transport system that is inoperation today provides two fundamental values,namely accessibility in both time and space, whichsets it apart from other transport solutions. Thesetwo values are of immense importance for theliveability in our modern world. On the other handthe car dominated system decreases the liveabilityof Uppsala in several different ways. Some of theseproblems, it is argued, could be solved within thecar system, through the adoption of moreenvironmentally friendly cars etc., but otherproblems are inherent in the car system and willremain no matter what changes are made.

Because of increasing demand of power on Malmbanan the capacity of the existing wires which supply the trains must be increased. This increases the stress on the existing poles and for this reason the system for supplying the loads along the railway is to be removed from the poles and be replaced by some other system. This thesis is a study on a two-level low voltage (1 kV and 0.4 kV) electrical system with the aim to investigate if it can be an alternative to the system used today taking into account the voltages, fault currents and costs.In this thesis the following tasks have been performed:? Gathering of data? Description of basic theory? Loadow and fault current calculations of the system with MATLAB? Life Cycle Cost estimate of the system? Analysis and conclusions from the resultsThe results show that the new system can be an alternative to replace today's system. The simulations and calculations show that the voltage drop is at an acceptable level and that the fault currents are large enough to supply a safe disconnection if a fault occurs at the far end of the system..

The management of information is a significant competitiveness in companies. Companies stored and save information every day, and it is very common to save de information in different sources. This makes de management of information complex. To mange, monitor and analyze the information, companies can use a system called Business Intelligence. BI system is an analytical system that extracts and converts data into useful information that helps employees to make informed decisions.

This paper discuss the possibilities to improve the Swedish political nomination system. It brings up some of the values and norms that can be used to change the existing system. Values as openness, the demand of responsibility and also if there is values from the American spoils system that can be used in the Swedish system. A minor purpose is to discuss the part of the parliament within the nomination process. To investigate this I have some theoretical starting points and a self constructed analysis tool.