On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

With the advance in computer and network technologies, multimedia systems and Internet applications are becoming more popular. As broadband network is prevailing, more clients are able to watch streaming videos or to play multimedia data over the Internet in real-time. Consequently, there is an increasing demand in the Internet for streaming video systems. As the run-time environment of such applications tends to be dynamic, it is imperative to handle transient overloads effectively. The goal of this work is to develop an algorithm that would provide a robust and controlled behavior of the video system so that important data is delivered on time to the video clients.

The viscosity of air buildings is a hot topic within the construction performers, which the industry feel they have too little knowledge about. This study is mainly aimed against air density in apartment buildings and airflow measurement. The study consists of a theoretical reference, educational visit, interviews and a survey conducted among construction workers at Magistratshagen in Linkoping.Earlier requirement in terms of air leakage through the climate screen was removed and today there are only energy requirement for a dwelling in Boverkets Building Regulations. The difference between a passive and a typical air tight construction is that the passive house have a maximum requirement of 0.3 l /s m2 of air leakage through the building climate screen. The requirement imposed on passive houses is to minimize the supply of power and energy for heating the building.Air tight constructions have heavy demands on the performance and accuracy of everyone involved with the project. The client must specify their requirements and also be prepared to pay for any additional costs. The architect and building planners have to design the building with regard to air tightness. Finally, the construction workers are required to do a careful work in order to get all the connections in the building air tight.The study suggests that an air tight building is a closed system where no forced ventilation exists. There are no reasons not to build too tight as long as there is a functioning ventilation. In this study the authors ask themselves how an air tight building changes over time. No theoretical information has been found on these changes, but the respondents assume that air density decreases with time. The deterioration is mainly assumed to be caused by construction materials changes over time. The study shows that construction workers knowledge of air tight construction is mixed, which they themselves admit in the survey..

Denna studie visar hur valet av metod och värderarens antagande påverkar värderingen avbyggrätter. Inledningsvis studeras ett antal faktiska värderingar med avseende på användametoder och antaganden. Vi finner att fastighetsvärderarna i regel använder ortsprismetodenvid värdering av byggrätter, som komplement används ibland en kalkylbaserad metod. Detvisas att fastighetsvärderarens antaganden om framtida bebyggelse i hög grad påverkarvärderingen. I mindre utsträckning påverkar valet av värderingsmodell..

In the haulage business customers are constantly requesting new features. Hence thedevelopment department must constantly update their system which ultimatelyresults in a variety of versions of the system. The large number of versions creates acomplexity which often reduces product quality and extends the developmentlifecycle time.The work on the following thesis has taken place at Scania?s Fleet Managementdepartment, which develops tools for hauliers to track their vehicle fleet in real time.The purpose of this thesis was to examine how Scania can handle an increasedamount of versions of the Fleet Management System which Scania expect will be seenin the future. The investigation was conducted by preparing a number of differentscenarios that formed the basis for a discussion of what these different scenarioswould mean for different parts of Scania?s business.

The purpose with this bachelor thesis is to identify risks and insufficiencies concerning the production at WilloMaskin AB. The project is limited to only 4 machines, where theories as ?OEE? (overall equipment efficacy) should be illuminated and analyzed. The theory of ?Single Minute Exchange of Die? is also presented.The method used in this project is mostly based on qualitative studies but also quantitative studies are presented.

The purpose of this study is to examine how employees in an organization using flexible work practices, experience that passive face time influences the evaluated of them. Further, the study aims to understand to what extent that perception of passive face time motivates the employees to spend more time at the office than is necessary for their work situations. The study concludes that employees in general perceive that passive face time does influence how they are evaluated and that this perception motivates employees that are relatively newly employed by the company to spend more time at office..

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

This thesis work aims to describe the prerequisites for a distributed treatment platform for real-time sharing of rounds performed by paediatric oncologists. The work started during the autumn 2004 and is directly aimed at improving the situation for the thirty or so specialist treating children with cancer. The work is not limited to the description of such a platform but also to select suitable software and hardware for the implementation of the platform and further more to coordinate the implementation. The production of several documents describing the platform is also part of this work. The work successfully led to the implementation of such a platform as described in the published article Barnradioterapi på distans Kristenssen et.

This thesis examines why working time preferences differ between workers and nations, and explains the effect of working time regulation and working time flexibility on negotiating work-life balance. In five separate sections the following working time issues are examined: the number of hours worked by workers in Europe; factors affecting individual working time preferences; how working time preferences are negotiated in the national industrial relations systems of Sweden, France and the United Kingdom; how the institutions of the European Union have influenced working time negotiations through the Working Time Directive; and the benefits and practices available to organisations implementing working time flexibility. Broadly this paper views working time preferences as being a highly personal and influenced by factors such as wages, taxation, culture (national and workplace) and non-work responsibilities. It is argued that negotiating a preferred working time pattern is essential to achieving work-life balance and when such a balance is achieved, workers are more healthy, motivated and committed to their employer. Essentially this provides an incentive for businesses to voluntarily implement working time flexibility beyond the regulatory standards..

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

Aim: The purpose of this study is to show models from the literature which can underlie appraisal and development in the real estate business of Gavlegårdarna.1. Gavlegårdarna should be able to use the study in their work with quality assurance off their services.2. Company?s in real estate business and other students should be able to use the study for an overview of quality models.Method: To collect data I chose to use a qualitative method based on the hermeneutic research method. The collected data was a result of literature and interviews.Result & Conclusion: From the literature there are two models that are suited for analyses of quality, that is the Housing quality model and the Gap model.

The purpose with this report is to give structure to the storage area betweenproduction and packaging at Spaljisten AB in Åseda. The purpose is also to givesuggestions for improvements of work tasks and thereby simplify and improve thematerial handling at the packing process.The background of the task is that Spaljisten AB is going to increase theirproduction and thereby they also need to increase the packing rate of theirproducts. They will manage this by installing a new automated packing line andincrease the efficiency of the old manual one. The theoretical background ismostly obtained from literature which contains relevant facts for our report.The storage area has been studied visually in order to search for improvements oftoday?s layout.

Financial bubbles are characterized by a large increase in the economic growth on the market as a whole or in specific industries. The change gives rise to an increase in the capital needed to finance this growth. Companies typically have a choice between equity and debt capital to finance its business and the mix of these types of capital is often referred to as the company?s capital structure. There has been a lot of research done in the field of financial bubbles and ofcapital structure, as of yet no studies seem to address these two areas in combination.The aim of this study is to examine if financial bubbles affect a company?s capital structure and through this also examine if the supposed changes in capital structure can be generalized.The study comprise of two identical time-series which examines the changes in leverage and the choice of financing during the Swedish real estate bubble in the early nineties and the IT-crash at the end of the 2000th century.

In the pulp industry, digesters are used to disolve lignin in wood chips. The concentration of lignin is measured and is called the Kappa number. In this thesis, the question of whether an online Kappa sensor, taking samples from the mid-phase of the digester, is useful or not is analyzed. For the samples to be useful, there has to be a relationship between the measured Kappa at the mid- phase and the measured Kappa in the blowpipe at the bottom of the digester. An ARX model of the lower part of the digester has been estimated.