Microwave is a time- efficient device for heating and reheating of foods. Despite the fact that its effects on foods have been evaluated during a long period of time, without any more negative effects shown compared to conventional cooking, one third of the Swedish population believes (in 2010) it accounts for a higher loss of nutrition. This literature review aim to compile studies regarding how food is affected by cooking in microwave, with respect to cooking losses, nutrition, secondary metabolites as well as sensory and textural aspects and compare it with conventional cooking. The compilation shows that different combination of effect (W), time and amount of water during microwave cooking have different effects on foods. The contents of proteins, vitamin B and carbohydrates are generally higher after microwave cooking, while anti-nutritional substances are affected much less during conventional cooking. This also depends on if it is of animal or non-animal origin. However, for the majority of nutrition values the differences are quite small.

In the history of scientific visualization techniques there is a lack of social science practices and methodologies. The advent of modern computer graphics brought the use of visualizations into a whole new era, but even though the tools by which such modern visualizations are created become easier to access and use, the lack of social science researchers harvesting the benefits of such tools still remain. This ease of use, increase in power and accessibility plus the ever growing need within the natural sciences to augment the human senses has further complicated the relationship between scientific methodologies, validity, reliability and the use of visualization techniques. This relationship must be explored, demystified and understood in order to fully grasp the impact of visualization practices when incorporated into any given scientific method. Within the social sciences there is one example of a tradition that has since its conception carried within it a graphical notion and a visualization practice.

Många av dagens dator och TV-spelsljud är anpassade för högtalaruppspelning, i många fall även flerkanalssystem som 5.1 surround och liknande. Få spel är anpassade för uppspelning genom hörlurar och för att få en bra ljudlokalisering i hörlurar behövs ofta någon form av surroundhörlurar. Vi tror att man kan skapa trovärdig (Riktnings)återgivning av ljud i hörlurar genom bara två ljudkanaler genom så kallat binauralt ljud. Vi kommer i detta arbete att beskriva de faktorer som spelar roll i vår stereohörsel, varför de fungerar samt vilka svagheter som finns i detta system. Vi kommer att skapa ett system för att behandla realtidsgenererat binauralt ljud för spel och beskriva de verktyg vi valt och den generella arbetsprocessen.

The purpose of this report is to survey Swedex AB?s production costs and to gather all info into a manageable calculation tool. This was made by time and motion studies, interviews of the personnel. All factors were gathered into an Excel chart.The calculation was made according to an additional-charge-method that was considered to satisfy Swedex AB?s goal.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

In the dairy production it is necessary to be able to sort cows. Dairy cows are sorted for many different reasons i.e. regrouping into production strings or for treatments i.e. inseminations, pregnancy and health checks, vaccinations or hoof trimmings. One labour saving way of conducting sorting is by using an automatic sort gate.

I den här uppsatsen ville jag ta reda på hur potentiella bostadssäljare i område Alfa skulle välja fastighetsmäklare och denna fråga besvarades genom en personlig enkätundersökning. Genom studien har jag ökat kännedomen om framtida bostadssäljares behov och förväntningar på fastighetsförmedlingstjänsten i Alfa och fått idéer på hur fastighetsförmedlingsföretag skulle kunna utforma sina erbjudanden så att de passar framtida bostadssäljares behov och förväntningar..

This master thesis was carried out at Scania in Södertälje, Sweden. It investigates the possibility of changing a connector interface that is used when there is a need for splicing the wheel speed sensor and thereby determine the consequences.The problems that exist with the current connector interface occur during assembly, as more time is required to complete a connection in a reliable manner. A complete connection requires joining the male and female connector, insert the connection into a protective retainer and then strap a cable tie on each end of the retainer. This process makes it more time consuming and it requires 20-30 seconds to complete the connection. Solving this problem would save time and enable easier assembly, therefore resulting in economical benefits.This thesis was accomplished through discussions with different sections at Scania, studying available documentations, observations during assembly, writing a requirement specification and contacting suppliers.The aforementioned methods resulted in four connector suggestions, the DT and DTMH connector from Deutsch, MCON connector from TE connectivity and MLK connector from Kostal, each of them compliant with the set demands of the surrounding environment.

BackgroundToday a common approach to solve a complicated problem is to assemble a temporary workforce in order to solve the problem by working together within a project. One of the difficulties with working in projects is to maintain the planned budget. Working hours and costs are often exceeded. Many companies presume that any certain project will succeed, a presumption that leads companies not to anticipate risks involved in a project. In companies today there is seldom time for evaluation or moderation of a project, in order to have time for evaluation there is a great need for an adequate planning of the project.IntentThe intention with this study is to create a model for planning, budgeting and evaluation of projects within consultancy companies.MethodWith the help of interviews and discussions within the group Hamnar och Byggkonstruktioner at Sweco has evidence to present a proposal on planning, budgeting and monitoring been developed.ResultsA model has been developed to ease for consultancy companies to plan, budget, monitor and evaluate projects.

In support to a decision to be made by the Swedish central competent authority on a minimal amount of straw for conventional growing-finishing pigs, a study using 168 pigs provided 7 different amounts of straw (20, 40, 60, 80, 100, 200 or 300 grams/pig/day) was performed. The straw was provided either once or four times per day. Detailed behaviour observations were made using focal animal sampling and continuous recording for one hour between 9 and 10 am and again between 3 and 4 pm. The data analysis is presented in three ways: broken stick model, polynomial trend line and logarithmic trend line. No method was suitable on its own but the use of all the methods simultaneously was found to portray the data in the best way.No significant differences were found when comparing pens provided with straw once or four times per day.

På Sveriges fastighetsmarknad har man de senaste åren kunnat urskilja ett allt högre fokus påmiljön från dess aktörer. Miljödebatten i Sverige har snabbt fått fäste och allt fler företag förstårvärdet av att fokusera på sådana frågor.Att utvecklingen fortsätter att gå framåt är viktigt då fastigheter och dess tillhörande byggnaderstår för nästan en tredjedel av världens utsläpp av växthusgaser och bara byggandet och driftenstår för cirka fyrtio procent av den globala förbrukningen av råvaror och energi. Prioritering avmiljöfrågor blir således viktiga vid fastighetsförvaltande och nyproduktion.Tidigare forskning visar att det finns en mängd incitament för att bygga och förvalta grönt. Ävenhyresgästerna har incitament för att hyra gröna lokaler. Vidare visar internationella studier att detinte alltid krävs stora åtgärder för att uppnå bra resultat vad gäller fastigheters energiförbrukningoch hållbarhet över tid.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

AbstractThe concept project is today used in several contexts and has different meaning in different contexts. Lately, projects have been seen as a form of organization and more companies convert from traditional organizing to organizing in a project form. The purpose and focus of today?s project is not only to increase quality and competence development for management but also to integrate different actors in order to e.g. increase customer value.LänsTeknikCentrum AB (LTC) in Jönköping is running different projects in order to support companies in Jönköping County.