The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The usage time is an important part of the specification for products powered bybatteries. The usage time is affected by a number of different elements; technical,environmental and how the product is being used. The method to determine theusage time is intended to define how measurements and calculations are to berealized along with influencing factors to keep in mind. With support from thismethod the intention is to gain control on how well the established usage time canbe expected to cohere with the real value and what affects the value.The study is done specifically for hearing protectors with battery powered built inelectronically functions. The functions can be level dependent function forambient hearing, 2-way radio communication, Bluetooth or FM-radio.The first chapter of the report describes the literature study performed in theproject.

Even though provocative marketing is a widely used tool among companies to distin-guish themselves from the crowd and catch the attention of consumers, there are several variables that remain relatively unexplored. This paper aims to investigate what impact the brand has on how provocative advertising is perceived and how it affects attitudes and behavior. An experiment was conducted where several well-established measures of ad effectiveness such as brand attitude, buying intentions and word-of-mouth intentions were used to analyze the effects of brand knowledge. The results show that a provocative advert lowers attitude and buying inten-tions for the established brand while it remains unchanged for the unestablished brand. This implicates bigger freedom for unestablished brands to elaborate with provocative elements in their marketing.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

This thesis deals with the numerical 3D simulation of a four stroke, spark-ignited, internalcombustion engine, which is mounted on a high performance motorcycle. The work, carried outin collaboration with Politecnico di Milano and MV Agusta, focuses on the simulation of theintake, compression and expansion stroke, including combustion simulation, using an opensource CFD code.Simulation of internal combustion engines offers a great challenge in the field of CFD research.Moving boundaries of the solution domain, caused by the motion of the piston and valves, leadsto deformation of the computational grid, with decreasing quality of the solution as result. Basedon this, a previously developed mesh motion strategy was employed where a number of meshesare used to cover the whole simulation cycle. Within each mesh interval the internal cell pointsof the mesh are moved to account for the boundary motion of the piston and valves. This strategywas previously applied to simplified geometries as well as real engine geometries.

This degree project is based on identifying and allocation of costs in a packaging section at Electrolux Distriparts in Torsvik.The purpose of this thesis is to identify the costs that emerge when packaging different articles and show how the costs are allocated. The report also contains improvement suggestions about how the company can use the current computer system more efficient.The methods that have been used in order to approach the problem and the collection of information have mainly been literature study, interviews and observation.The work started with answering the questions; which expenditure cost and direct cost exist in the section, how can they be allocated, if improvement can be done and how the flow of information is supposed to happen.In order to answer the questions we used our former experience and the knowledge we achieved by reading literature, interview relevant persons in the company and observations carried out in the section.Through our studies, we came up with an Excel file, which is the groundwork for a template that can be used by the company in different occasions depending on the situation and need. It is important to remember to modify the template if the presumptions change. In the template, we have identified the different kind of costs that emerge when packaging different articles and we have also allocated the costs. In addition formulas and estimations that are necessary for the cost calculation are presented.The work consisted in making the groundwork for a template.

Följande uppsats utgör en litteraturstudie över två vanliga konsumtionsvalsteoretiska antagande och deras biologiska rimlighet. De antagande som testas är: (A) En ekonomisk agent handlar som om hon maximerar en nyttofunktion. (B) Individen är självisk. Angående (A) dras slutsatsen att denna kan antas uppfylld. Antagande (B) är mer komplicerat.

Title:Changes in the auditing work of asset management companies.Advisor:Bengt BengtssonExaminer:Stig SörlingAuthors: Mattias Skog & Andrea CyganikPurpose:The purpose is to examine how the work of auditing asset management companies has changed since the crisis 2008.Methodology:The study is based on an adductive approach using a quantitative method.Theoretical framework:The theoretical framework includes previous studies and literature concerning the auditing business, the financial crisis, principal agent theory and stewardship theory.Empirical findings:The empirical material is based on answers from 22 auditors in 6 different auditing firms, and it was conducted by sending them a survey.Conclusion:The study showed that the major changes were changes in laws and regulations controlling the auditing business. New guidelines and laws were set to try and improve the quality of the auditing business while trying to restore stained reputation. New regulations were also set to increase the control the government have of inspecting the business through finansinspektionen..

When Sweden acceded to the European Union in 1995 the term social economy was introduced to the Swedish context, gradually replacing the term civil society. This replacement can be seen as an indicator of a changing meaning of what the concept of civil society used to stand for.The aim of this essay is to study if it is possible to identify changing perceptions of the role of civil society for democracy in Sweden in government bills between 2002 and 2008, and, if so, what effect does this have on the delineation between the civil society and the government.An analytical model is proposed consisting of two dimensions which both capture the roles of civil society for democracy and the model examines how those roles relate to the government.The conclusion is that the government still sees the main function of civil society as a democratic school and a change agent for democracy. However, there is strong evidence to suggest that the civil society is increasingly regarded as more of a welfare producer than a fosterer of democracy..

This thesis describes how the chip space and coolant channels are designed in today?s mills, the ideas behind the design and what is considered to be the best method of cooling. It contains ideas on how the chip space can be simplified. It contains several concepts on how the cooling could be designed for better efficiency and manufacturability. There are also suggestions on how the cooling could be stopped when the cutter isn?t cutting.

Nanotechnology, one of the most interesting sciences today will no doubt have an enourmous impact on tomorrow's society and industry. One of the most interesting nanomaterial that has been discovered is the semiconductor quantum dot (QD). This material shows interesting novel properties such as a size-dependent band gap, which is an effect caused by the quantum confinement effect in all three dimensions. Due to this phenomenon the absorption spectrum can be tuned to the desired value by adjusting the size of the QD.This thesis aims to investigate how the solvent ratio of H2O/Ethanol affects the optical and structural properties of copper sulfide QDs manufactured in a chemical synthesis way using modern microwave heating. The process of manufacturing QDs using chemical synthesis often involve a capping-agent to prevent the QDs from agglomerate into bigger structures.

Syftet med arbetet var att undersöka pedagogernas inställning till lek i skolans lägre årskurser. Vidare att belysa lekens betydelse för den kognitiva utveckling och hur pedagogerna använder leken i sitt dagliga arbete. Metodern är en kvalitativ, halvstrukturerad forskningsintervju med hermeneutisk inriktning och bygger på intervjuer med sex pedagoger. Jag redovisar intervjuerna i fyra olika teman, som kom fram under analysen av intervjuerna. Sammanfattningsvis pekar resultaten av min undersökning på att samtliga pedagoger är positit inställda till att lek och kopplar leken till den kognitiva utvecklingen..

Följande studie analyserar utdelningspolitiken hos familjeföretag under åren 2004-2014. Studien är uppdelad i två steg. Första steget syftar till att svara på frågan om familjeföretag har en högre utdelningsnivå än icke-familjeföretag. Steg två undersöker huruvida ett aktivt ägande påverkar utdelningarna hos familjeföretag. Studien baseras på en totalundersökning av företag som under våren 2015 var noterade på Nasdaq OMX Stockholms Large-, Mid- och Small-Cap.