Sun Microsystems chose its own Open Source path by not following competitors in their commitment toGNU/Linux. Sun instead created its own Open Source project from the source of Solaris under the name ofOpenSolaris. The business model of OpenSolaris belongs to the new and more commercially viable OpenSource, referred to as OSSg2. This survey was based on articles on the adoption of Open Source in organizationsand István Orci?s publication Kritiska IT-System.

Grid codes are becoming more demanding on power generating units due to the factthat the complexity of the power grid is increasing. The penetration of wind powerhas grown over the last years and it is clear that wind farms need to be addressedwith the same type of grid codes as conventional generation units. There is howeveran undeniable difference between the technology in conventional synchronousgeneration units, and the asynchronous generation units in wind farms.This thesis has reviewed the current grid code in Sweden and compared it to the newcode proposed by ENTSO-E, ?the Requirements for Generators?, in the aspect ofwind farms with an installed power of 30 MW or more. The comparison has beencomplemented by an analysis of how wind farms of two different technologies(Doubly fed induction generators and full power converters) can meet therequirements and technical proposals have been given on how to be able to meetcompliance with the new grid codes.The Requirements for Generators contains many non-exhaustive and optionalrequirements, because of this it has been difficult to, at this stage, exactly point outthe technical impact on the grid connection of future wind farms in Sweden.

This report discusses a method to detect divers in harbour environments usingpassive acoustic detection. The goal was to achieve as high detection as possiblewithout having too high false alarm rate. A short execution time was also desirable.By using the characteristic of an inhalation a band-pass filter was applied to the signalto improve the signal to noise ratio. After the filtering an energy estimation of thesignal was made. This energy estimation was later used in a frequency analysis, whichcould tell us if there were enough energy in the frequencies that correspond to adivers breathing frequency.

De flesta företag använder sig av något slags system för att kontrollera arbetsflödet. Dessa system används av alla på företaget och därmed är det viktigt att undersöka, hur medarbetarna upplever detta system. Med en explorativ utgångspunkt gjordes en enkätstudie på ett företag i Västsverige. Resultatet visade att deltagarna, förutom några få procent i stort sett hade liknande positiva upplevelser. Ingen skillnad fanns heller mellan grupperingarna ung/gammal eller antal år de arbetat på företaget.

The aim of this report is to improve the fire safety at Hallsta Paper Mill in Hallstavik, Sweden. In order to do so large parts of a fire-protection management system for the paper mill has been created. The report begins with giving a general description of management structures and fire-protection management systems. An account is given for how management structures are designed, and how they should be implemented, maintained and updated. Thereafter follows a description of what routines and instructions should be included in a fire-protection management system..

This master thesis was performed at IdaInfront AB. The aim of the thesis was toinvestigate how the design principles ofthe user interface in Windows 8 can beapplied to a case management system. Theuser interface in Windows 8 is based ona design language called Metro and it isprimarily designed for touch screens.Ida Infront AB wanted to know whatpossibilities and limitations the Metrointerface offers.The study has resulted in a prototypeapplication that is developed in Windows8. The prototype shows how the Metrointerface can be applied on a casemanagement system. Some limitations inthe usability have been identified inthe Metro interface when applied to acase management system.

The purpose of this paper is to investigate the possibility of replacing data from highspeed filming (Qualisys motion capture) with data from Inertial Measurement Units (X-io technologies), when used to run a model of torso and pelvis in OpenSim. Qualisys motion capture data is used as the golden standard to validate the result visually and with Bland-Altman plots.In order to obtain comparable data experiments are conducted where both methods of collecting data are used simultaneously. Data from the IMU's then need to be processed in Matlab before it can be used to run the OpenSim modell. Several Matlab programs rotate the IMU data to a static reference frame, filter and integrate it, then create viritual markers that correspond to Qualisys' optical markers.The conclusion is that using IMU as a method for collecting data can replace Qualisys in some applications, but not in ones that require high precision. However, this paper only begins the examination of IMU's and there are most likely improvements to be made..

This is a qualitative case study of young womens? experiences of blogging about One Direction on the social media/microblogging platform Tumblr. The aim of this study was to find out what fan blogging is and why fans blog. We did this by creating an account on Tumblr where we invited young women between the ages of 16?29, who had active fan blogs dedicated to One Direction, to answer an open-ended questionnaire.

 The 1st of July 2006 Sweden made a change of authorities in the system concerning the reception of separated asylum seeking children. Prior to the change, the Swedish Board of Migration was held completely responsible for the reception of these children, who arrives in Sweden without their parents or any other relatives to care for them. Since the alteration of the law (1994:137) the responsibility for the housing of these children now lies within the Swedish municipalities, while the Board of Migration still handles their legal commissions. The change was intended to fundamentally improve the conditions under which these children were taken care of. However the implementation took a severe wrong turn when the municipalities weren't prepared for their new responsibilities and the immediate result was alarming. This qualitative study is based upon interviews with the people responsible for the reception of the separated asylum seeking children in the municipalities of Kronobergs County, as well as one of the two people in charge of the new system at the Swedish Board of Migration.

Title: Register now and stay in touch ? a study about the relationship between CRM-system and business performance.Purpose: The purpose with the study is to identify if there is a positive relationship between CRM-system and business performance in Swedish multinational companies in the industrial sector.Audience: This essay is addressed to the Swedish multinational companies in the industrial sector.Methodology/ Approach / Design: We have applied a qualitative method, with a deductive approach. Through an in-depth interview with the case company Benzlers AB, which provided the empirical basis, supplemented with the CSI-values.Conclusion: The study has presented evidence, that there is a positive relationship between CRM-system and business performance which has been confirmed by the positive increase in the CSI-value after the implementation of the CRM-system.Originality/ Value/ Contribution to knowledge The study contributes with its own results that fill in the knowledge gap about the subject in Sweden. The study finds that the CRM-system effectives the interaction with the customer and thereby business performance increase, with the CSI-value as unit. This therefore increases the value and importance of investigation of Swedish multinational companies, whose purpose is to satisfy the customer and at the same time, increase the business performance.Future research: For future research we suggest publishers to base the empirical basis through additional in-depth interviews with added case companies. In order to confirm the relationship between its validity in the industry, and also indentify what happens between inputs and outputs, which leads to increased business performance.Keywords: Customer Relation Management (CRM), CRM-system, customer satisfaction, business performance, Customer-Satisfied-Index.Thesis type: Business economy 61-91, Bachelor essay, Marketing (15 credits), spring 2010th..

Examensarbetets syfte var att skapa ett generellt mät- och styrsystem som är möjligt att fjärrstyra över Internet. Systemet består av en kontrolldator och ett antal separata moduler, vilka var och en realiserar någon typ av mät- eller styrfunktion. Användningsområdet för ett sådant system är brett; det kan exempelvis användas inom automation av bostäder, för process-övervakning och styrning inom tillverkningsindustrin, eller inom under-hållningsbranschen.Eftersom ett fullt utbyggt system kan bestå av ett drygt 100-tal olika mo-duler, är det här examensarbetet av praktiska skäl begränsat till att rea-lisera en handfull av dessa. Då systemet är enkelt att skala upp, är den be-gränsningen i antalet realiserade moduler i prototypsystemet inget som påverkar de erhållna resultaten. Exempel på storheter som kan övervakas är temperatur, avstånd, lufttryck och ljusstyrka.

Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.

The purpose of this project is to analyze earthing systems for houses. By practical measurements and theoretical analyzes consequences of possible faults, that can occur within the facility and in the low-voltage distribution network, is illustrated.  The reason for this project is that nowadays one has to arrange with a main equipotential bonding system for buildings. Apart from that, if necessary, bathrooms must be provided with a supplementary equipotential bonding system.The practical measurements verify that potential differences in facilities may be due to voltage drops in the PEN conductor between the origin of the electrical installation and the power transformer.Based on the theoretical analyzes of possible faults, it is considered that the requirement for  supplementary equipotential bonding systems for bathrooms in most cases can be questioned, when basic insulation, fault protection, residual current devise and main equipotential bonding system already provides an adequate level of protection.A PEN conductor loss may result in a situation where metallic parts attached to the equipotential bonding system starts working as earth electrodes. Equipotential bonding system may also increase the incidence of stray currents. If TN-C-S systems is provided with a local connection to earth a redundant system against PEN conductor loss is obtained.

Stump wood is a hot alternative when the heating plants demands more and more forest fuel. The aim with the study has bean to calculate the costs in four different systems for transportations of stump wood, examine if there are any differences in fuel quality for the stump wood in the different systems, analyse if the fuel quality in stump wood is affected with the time it lays by the road side and how much space the stump wood demands on the road side. To calculate the costs for the different systems a system analysis was carried out, where some of the costs were collected through field studies on Holmen Skog stump experiment and other costs were collected from literature and contacts. Data for the fuel quality study was collected from Eons heat plant in Norrköping. Data for the study of how much space stump wood takes along a roadside was collected from field studies.

An automatic milking (AM) system should be combined with some form of controlled cow traffic to minimize the time spend on fetching cows to milking and to increase the milking frequency. By restricting the hours spent on pasture per day you optimise the AM system use during pasture period. A reason for this is becuase cows do not return to the stable for milking during night which cause that the milking unit stands empty those hours. In organic production it is required that the cows should be able to graze a certain amount of daily dry matter (DM) intake on the pasture. In the county of Dalarna where the farm is located the yield of the pasture is about 3000 kg DM per grazing season and hectar.This means that the pasture area should be 14,25 hectare to 57 milking cows.