This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

The impact of computer programs in safety-critical systems has increased in the past decades and computer-based systems can now be found in a wide range of applications. A new approach for developing dependable systems is documenting all design rationale that affects safety using Intent Specifications. A recent approach for developing complex systems efficiently and in an upgradeable manner is Component-Based System Engineering. In this thesis, these approaches are combined in the development and upgrade of a Remote Robot Control Unit by using the tool SpecTRM. The case study showed that Intent Specifications and CBSE could successfully be combined.

Outsourcing means to contract out work previously done within the cooperation to a supplier.This is an increasing trend today. Traditionally companies have outsourced manufacturing butwith the growing specialization they tend to outsource other activities as well.China?s economical reforms and entrance into the World Trade Organization, WTO, hasenabled international business connections. Since China offers one of the cheapest labours inthe world, many companies have an interest in starting up an activity in the country. Themany foreign investments in China have lead to an economical growth which in turn hasmade it possible for China to invest in the Chinese competence and innovative capacity.The commissioner of this master thesis, SMS, is one of the leading actors in retrieval ofamong other things mounts and stands for flat screens and projectors.

This thesis is performed as a summarizing project for the mechanical engineering education at School of Engineering in Jönköping. All knowledge necessary to complete this thesis was gathered from previous courses and education.This project was to develop a new product for the company TR Equipment AB in Tranås. The new product is going to be based on an already existing product, TR 1700. TR 1700 is a bathtub equipped with a height adjustable function. This product is used in retirement homes and in the care of disabled people.

I Sverige genomförs varje år offentliga upphandlingar till ett värde av ca 500 miljarder kronor. Alla offentligt finansierade verksamheter måste följa lagen om offentlig upphandling och den formella upphandlingsprocess som lagen specificerar. Lagen är allmänt formulerad och anvisar en process där fokus ligger på förarbete och matematisk utvärdering.Cognitive Systems Engineering har vuxit fram utifrån insikten att effektiva processer kontinuerligt behöver använda såväl feedback och feedforward för att uppnå sina mål. Typiska tillämpningar är dynamiska, tätt kopplade processer där dessa behov är tydliga, men CSE som ramverk är generellt definierat och bör gälla även för en beslutsprocess på organisationsnivå. En CSE-analys har potential att förtydliga funktionella faktorer som tillåter upphandlare att genomföra effektiva och ändamålsenliga upphandlingar.I syftet att testa ovanstående hypotes genomfördes en fallstudie av Linköpings Universitets upphandling av företagshälsovård 2008.

This Master thesis has been carried out at Scania CV AB in Södertälje, in collaboration withKTH, The Royal Institute of Technology, Stockholm. The focus of this Master thesis isSetBased Concurrent Engineering(SBCE), with the purpose of answering the questions: what isSBCE, how does it work, and for what purposes is it applied.It was early established thatSBCE is often included as a part of Lean product development,which in its turn is often related to Toyota?s way of working. TheSBCE method includesworking with multiple solutions in parallel, eliminating weak alternatives throughout thewhole process. In opposite to a conventional product development process, where it iscommon one at an early stage tries to identify and choose the most promising alternative.Despite the appearance ofSBCE as a resource consuming method, figures from Toyotaindicates the opposite, thatSBCE is in fact a very effective way of working compared to othermore traditional methods.The process of this Master thesis was divided into three phases.

Detta examensarbete har utförts vid Duroc Engineering AB i Luleå. Duroc Engineering är Sveriges ledande företag inom laserförädling av metalliska ytor och levererar tjänster och produkter till framförallt gruv-, stål-, flyg- samt verkstadsindustrin. Rostervagnar transporterar kulor som används vid sintringen i Malmberget vid LKAB:s kulsinterverk. Genom att vagnarna passerar genom olika värmezoner sintras kulorna och vagnarna töms därefter för att hämta upp nya kulor. Detta pågår dygnet runt, året om, vilket medför stort slitage på vagnshjulen.

VSEM project and the need for a more efficient way of handling requirements andinformation are highly apparent.The overall objective of this thesis is divided into two parts:1. To identify criteria/factors leading to a successful introduction of an informationmanagement system.2. To develop an implementation process for a requirement management system ?the first step towards a PLM system in EE development at VCC.This will be done through interviews with employees, a literature review and an analysisof studies of three earlier projects within VCC.The conclusion of this study shows the great need for change in work methods fordesigners handling information and requirements. An implementation process has beenidentified with guidelines on how to handle different phases of the process.

Nano materials can today be found in a wide range of consumer products and the number of new products on the market is expected to inrease. In the shadow of hope for nano materilas potential in various applications, low awareness of its health and environmental risks is hiding. Furthermore, the knowledge about people´s risk perception of nano materials is limited. Parallel to the situation described above, the scholls meet the challenge of incrasing the scientific literacy. To achieve this goal, skills in argumentation in science studies has been emphasized and the concept of socio-scientific issues has been emerged.

Title:Chillchain for cut flowers ? how the distribution works.Author:Anna-Maja Svarén, student at Lund Institute of Technology, mechanical engineering.Supervisors:Annika Olsson, Department of Design Sciences.Bengt Sahlberg, Bioett AB.Problem:How does the distribution of cut flower works regarding temperature, losses, responsibility, complaints, packaging and weak points?Purpose:The purpose is to map the distribution of cut flowers, with focus on losses in the temperature, from farm to store. The goal is to identify weak points in the chillchain and to se how wrong temperatures affect the flowers. The results can be a help to secure the chillchain.Method:The work started with a problem; map the distribution of cut flowers with focus on temperature losses. Data was collected on the basis of this problem, then analysed, and finally conclusions were drawn.Conclusions:The affect handling and distribution has on a cut flower is very complex.

The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.

Uppdraget som gavs av Brimer VA Produktion AB i Osby var att ?föra fram deras nya vattenledningssystem i ljuset?, göra en FEM-beräkning på en detalj i systemet och ta fram en ekonomisk samt teknisk jämförelse mot det traditionella vattenledningssystemet. Bästa lösningen på uppgiften var att visualisera vattenledningssystemet med hjälp av animerade filmer. Detta med tanke på att visualisering har ingått till stor del i utbildningen Virtuell Produktutveckling & Design..

Grunden för examensarbetet är den tävling om nytt stadsbibliotek i Stockholm som Stockholms stad utlyste 2006. Det nuvarande stadsbiblioteket från 1928, ritat av Erik Gunnar Asplund, är en av Sveriges mest kända byggnader. Uppgiften har varit att rita en tillbyggnad som kan bilda en helhet tillsammans med det nuvarande biblioteket. Det har handlat om att först värdera det som finns idag och sedan tillföra något för framtiden..

The purpose of this thesis is to examine and present the oportunities of solvingcontrol problems using Modelica. This is done by creating some demonstrationexamples with exercises. These examples should cover as many types of controlproblems as possible. The exercises are aimed for people with basic knowledgein modeling and automatic control engineering but with little or no knowledgein Modelica. There are different types of Modelica implementations and the onesused in this thesis are OpenModelica and MathModelica..

AbstractA continuous improvement of products and production is an important goal for a modern industrial company. A small engineering group located in Sweden came in touch with the authors of this report during the spring semester of 2014. The aim of this report is, as part of the group´s ambition of improvement, to analyse ways in which the quality of component casted parts can be verified. Non-destructive testing (NDT), and methods to use it for quality control, is the main focus of this report. However, fields such as material standards, component casting and quality engineering are analysed as well.