The purpose of this study was to examine people's experiences of self-medication with cannabis in relation to post-traumatic stress disorder and professions? opinions of cannabis for medical use. The study focuses on norms and values as well as its impact on individuals. A qualitative approach was used with thematically open interview questions, in order to gain an insight into the interviewees? reality and their experiences.

The study aims to investigate the impact of industrialised homebuilding in the creation of the aestheticproperties of the dwelling architecture.The concepts of industrialised homebuilding and the aesthetic properties of the dwelling architecture aredefined by previously developed models. In these models, industrialised homebuilding is described byeight characteristic areas. The aesthetic properties of the dwelling architecture are described by sevenaesthetic qualities.The study was conducted as a qualitative study, and in-depth interviews were conducted. The companyJM AB is the analysed unit that the author of this report has chosen to study. JM employees and by JMhiredarchitects were interviewed.The report concludes that characteristic area planning and control of processes are considered to havepositive impact on the aesthetic qualities if the process is designed in such a way that the creations ofthese are admitted.

This is a theoretical study of changing relations between men and women in the context of modernisation. Ideas derived from a general theoretical discussion will be illustrated by examples from countries that are going through societal changes affecting the lives of men and women; Uganda, Morocco and Mexico. Focus will be on connections between changes in the public sphere and interpersonal relations in the private sphere. One part examines certain effects of women?s increased participation in politics and in the workforce, concluding that these changes may cause conflicts with traditional values and consequently tensions in inter-gender relations.

The effect of inoculation on containerized pine and spruce seedlings in a nursery with two ectomycorrhizal fungi was investigated in regard to the development of mycorrhiza and plant growth. The fungi were Elaphomyces muricatus and Elaphomyces granulates and the inoculated seedlings were compared to an uninoculated control. These seedlings were all fertilized with arginine. Five mycorrhiza species were found after DNA sequencing of the mycorrhizal root tips with different found morphotypes on seedlings from all treatments. Thelephora terrestris was the type which had the greatest distribution on pine seedlings and Tylospora asterophora was found at big extent on spruce seedlings. The inoculated species was not found, if it was due to the species hadn?t colonized the roots or if the DNA sequencing failed we can only speculate about.

SKV and Tullverket have several important tools and methods available in each activity to ensure that taxes and fees are paid and charged rightfully. Among other things they use tax or customs surcharges, targeted and general third party injunctions or targeted and general third party audits. The targeted controls, ergo targeted injunctions and audits, are targeted towards specific persons or documents while during the general controls these are not specified. The methods have repeatedly been the subject of discussions and attempts to simplify the tax procedure and increase the Rule of Law for the individual.The government appointed a commission on March 8 of the year 2012 with the assignment to prepare proposals to increase the Rule of Law in the tax procedure. The assignment was therefore to analyze the areas of tax and customs injunctions, reimbursement because of expenses and agents and also third party controls.

Våta kopplingar används i automatiska transmissioner för att överföra vridmoment. De primära komponenterna i en våt koppling är de oljesmorda pappersbaserade friktionslamellerna och separationslamellerna gjorda av stål. Volvo Construction Equipment (Volvo CE) utvecklar och bygger automatiska powershifttransmissioner med våta kopplingar till sina anläggningsmaskiner. Volvo CE och Luleå Tekniska Universitet (LTU) bedriver tillsammans forskning om våta kopplingar som involverar pappersbaserade friktionsmaterial. De två vanligast förekommande materialen i produktion, i detta examensarbete benämnda som material A och B, testades i en testrigg på LTU.

The purpose of this study was to examine work related stressors and related coping strategies among case managers at a domestic violence shelter in the United States. We further wanted to examine whether locus of control among the participants could be related to work related stress and coping strategies. Qualitative interviews were performed with eight case managers to gain knowledge about the stressors and coping strategies they used by examining their thoughts, feelings and experiences. The result showed that the case managers experience a number of stressors in their work environment such as system problems (e.g., lack of re¬sources and time pressure) and emotional stress. Coping responses among the case managers included efforts to alter the problem, so called problem focused coping, efforts to control emo¬tions, so called emotions focused coping and social support from colleagues.

Mechanical relays are more and more being replaced with semiconductortechnology. In this thesis it is investigated if and how the larger loads couldbe controlled by transistors. The main part of this work aims to create andverify a solution that can control the starter motor, as well as protect it incase of any failure. The different malfunctions that the solution protectsagainst is high current, too high peak current, low current, maximum cranktime and minimum cool off time. The timers also protect indirectly againstoverheating of the starter engine.The transistors used are BTS555, from Infineon.

The so called ?ByggaF-method? is a relatively new Swedish method to stop moisture from being built into a building. The method should prevent damages on buildings as a result of mould growth and moisture. The purpose of the method is to include moisture control in the entire constructionprocess, from the projecting phase and all the way to the management phase. Up until now, there is no proof if the method is profitable or not and no studies have been made on the topic.

Företag idag söker ständigt nya och förbättrade konkurrensfördelar, som är en konsekvens av den snabba och ökande globaliseringstrenden. Ett viktigt grundincitament för att skapa dessa fördelar samt bemöta omvärldens föränderlighet och krav har bidragit till att allt större fokus riktats mot behovet av en bred kompetens, det vill säga ett utvecklat humankapital, inom företag. Humankapitalet är en av de mest betydelsefulla grundpelarna i ett företag då företaget är beroende av de anställdas kompetens och innovationsförmåga. Det är således viktigt att ett företag styr humankapitalet på ett sådant sätt att det når en stärkande eller förädlande effekt. Ett sätt för att strategiskt styra förädlingsprocessen av humankapitalet är att nyttja Simons Levers of Control, vilken även går under benämningen Simons styrmodell.

Active headsets have been on the market for years and now it is time for something else to enter the stage. The technology of active noise reduction can for exmple also be used in ventilation systems for reducing ventilation noise. An active control system principally consists of four important components, namely the downstream error microphone, the upstream detection or reference microphone, the digital signal processor (DSP) and a loudspeaker. The upstream reference microphone listen to the primary ventilation noise and sends it to the DSP which makes a phase shift to the signal and sends it to the loudspeaker. The loudspeaker sends out the opposite waveform of the incoming one and reduce the primary ventilation noise.

Background: Each year approximately 30 000 people suffer from stroke in Sweden, often with substantial mental and physical consequences. Those who suffered from stroke handled the situation by mourning what they had lost and by accepting their changed body and life situation. For those who provide care for people who has suffered a stroke help and support was required. The caring science perspective was based upon caring and suffering. Aim: The purpose of this study was to describe family caregivers? experiences of caring for persons who had suffered a stroke.

This report is a description of a developed educational simulator over rail vehicles and its components. The simulator is a hardware-based prototype over a door system on rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.

Ett arbete om hur man utformar externt informationsmaterial.

Friend lists allow Facebook users to group their friends and may be used to share certain information only with those in a specific list. This function has been around for several years, but has never gained any particular popularity among users, most of whom probably did not know it even existed a couple of years ago. In the fall of 2011, however, the function was updated and made more visible on the site.There are several possible uses of friend lists, such as privacy control, filtering of the news feed, self-presentation and targeted information sharing. This paper aims to investigate the extent to which friend lists are used by students today, as well as why students actually use their lists, i.e. for what purposes.Judging from the results of this study in comparison with earlier research, there seems to have been a somewhat recent increase in the awareness of the fact that friend lists actually do exist, but still most users tend not to utilize them.