Problem: What are the characteristics of Polykemi?s management control system and how is it affected by growth? Purpose: To describe and analyse the management control system of a medium-sized family-owned company from the perspective of Simons? Levers of control. Research design: An abductive, interview-based case study of Polykemi AB. Conclusion: Polykemi?s management control system is primarily a traditional one which is rather strong in terms of Levers of control.

This master thesis deals with problems in the arc length control in Pulsed MIG/MAG Welding. The main problem is that it is not possible to measure the arc length. In the present solution the voltage over both the electrode and the arc represents the arc length. To improve the arc length control a model of the electrode melting has been built. One output from the model is the voltage over the electrode and with this voltage together with the measured voltage it is possible to calculate the voltage over just the arc.

The implementation of a material requirements planning system is a complex and demanding task. There has been much research into what factors are important in such implementations, but seemingly very little about the links between critical success factors and management control systems. This thesis attempts, through a case study, to answer the question of how management control systems affect the implementation of an MRP system in ASSA AB, a Swedish manufacturing firm. Data is primarily collected through interviews. Theory regarding implementation success definitions, critical success factors as well as management control systems is presented.

This study aims to examine the effect management control systems have on which goals health centers prioritize. The management control systems of one privately owned and one publicly owned health center have been studied through a qualitative case study. Robert Simons (1995) framework with four levers of control (diagnostic control systems, interactive control systems, belief systems and boundary systems) has been used to structure the study. For both health centers we found a conflict of interest mainly between the diagnostic control system and the beliefs system, where the diagnostic control system is biased towards quantitative goals and the beliefs system is mainly biased towards qualitative goals. However, despite the unbalanced levers of control the studied health centers have been able to reach a well functioning compromise between quantitative and qualitative goals..

Locus of control och självkänslaEn jämförelse mellan elit- och icke elitidrottareHelén BlomstrandBesitter individen en hög inre locus of control anser denne attindividen själv är ansvarig för valen denne gör i livet, medan en högyttre locus of control innebär det motsatta. Syftet med studien varbland annat att se om elit- och icke elitidrottare skiljde sig gällandelocus of control; får elitidrottarna högre förvärvade än traitbaseradeinre attityder gällande självkänsla och locus of control, än ickeelitidrottare, har locus of control samband med självkänsla. Enenkätundersökning genomfördes på 82 idrottare varav 42elitidrottare. Resultatet visade att elitidrottarna uppvisade signifikanthögre resultat gällande inre locus of control än icke elitidrottarnasamt att det fanns könsskillnader då männen uppvisade högre värdengällande en inre work locus of control. Resultatet indikerar även attbassjälvkänsla har ett positivt samband med locus of control.Diskussionen fördes kring om en högre inre locus of control ledertill bättre idrottsliga resultat samt kritisk granskning av gällandeuppsats.Keywords: locus of control, external and internal, athletes, self-esteem.

Earlier quantitative entrepreneurial studies with a focus on poverty rate has centred their arguments and analyses entirely on income differences which has resulted in a high poverty rate among self-employed. Their results shows that variables such as age, gender, hours of labour and structure of the household significantly affect the poverty rate among self-employed. In this study we aim the focus on material living standards instead of income differences, thus using a more representative approach while studying entrepreneurial poverty. The purpose of the study was to examine how personality traits (big five) affect the material living standards among the self-employed in Sweden, using a group of employed as a control group. Variables earlier known to affect the poverty risk among self-employed where used as control variables together with education and household income.

The purpose of this thesis is to find means of control that secure cost efficiency regarding the accommodation for the employees on missions abroad of the Swedish Ministry for Foreign Affairs. Today the ministry?s cost for the employees? rented housing is 100 million SEK and there is a need of improvement in the control of these costs. A work method for organizational development will be used in order to reach the findings presented in the thesis. First we study the strengths and weaknesses in today?s control system.

SELF CONTROL är ett undersökande examensarbete i textildesign. Med en textil hantverksmetod undersöker jag mötet mellan kontroll, tidsåtgång och material. Detta med utgångspunkt i en feministisk diskurs. Jag ser kontroll som något som exkluderar, censurerar och begränsar möjliga uttryck inom textilt hantverk på samma sätt som kvinnokroppen kontrolleras i ett patriarkat. Jag har använt mig utav en performativ och repetitiv metod som aktivt har gått ut på att bryta mot föreställningar om hur hantverket ska utföras.

Background: The use of reward systems can be of strategic importance as well as an affective mean of control for the organization in its work to achieve its goals. The municipal sector is characterized by its transparency and its responsibility for the taxpayer?s money. We therefore wonder which possibilities the municipal sector has to use reward systems as a men of control. Purpose: We intend to research the possibilities that the reward system offer as a mean of control for employees at the higher municipal level, with a special focus on commitment and motivation.

The purpose of this study was to examine if there was a relation between birth order, gender and locus of control. There where 162 participants in the study, 44 men, 115 women. Birth order was coded into three levels. There where no significant differences between birth order and locus of control. The result showed that female participants where more external when it came to locus of control.

I denna studie har undersökts personlighet och Health Locus of Control hos 56 kvinnor och män i åldrarna 18 till 65 år, där 30 var svenskar och 26 var tyskar. Undersökningens frågeställning var: Är en eller fler personlighetsdimensioner i Fem-Faktor-modellen relaterade till i vilken utsträckning en individ har Internality, Powerful others eller Chance Health Locus of Control. En NEO-PI enkät och ett Multi dimensionella Health Locus of Control-skalan-formulär administrerades. Resultatet från undersökningen kunde påvisa en signifikant korrelation mellan Openess to Experience och Powerful Others Health Locus of Control samt Conscientiousness och Powerful Others Health Locus of Control. En signifikant skillnad mellan svenskar och tyskar beträffande Powerful Others kunde också påvisas.

In this final thesis a rough description of aluminium extrusion is made, the importance of temperature of both the raw material and the extruded profile for a good profile quality. The difficulty in controlling these temperatures are discussed and attempts to increase the control are described. The attempts are basically made by controlling the furnace that is heating the raw material. This is done in a manner that the raw material reaches its final temperature shortly before it is extruded. An IR-camera at the press can be used for profile temperature measurements.

The purpose of this project is to study Partab's material distribution process, furthermore identify critical problem areas within the company. Further the aim is to provide suggestions to new work procedures regarding material distribution and related processes. Appropriate literature has been used as a support in this process. The main goal of a commercial company is to generate cash flow, and maximize the return on investment. Streamlining material supply and the use of material is a part of this process. Virum and Persson define logistics as: "Logistics is the approach and principles founding the process of planning, development, coordination, organisation, management, and control of material distribution from supplier to user".

The task in this thesis is the steering of one of Saab Bofors Dynamics robots using Sliding Mode Control, a method they never used before. The robot constitutes a system which in addition to perturbations and uncertainties due to modeling imprecision, hold the difficulty of being highly time variant. In order to be able to keep required performance with uncertainties and modeling imprecision present, the use of robust control methods like Sliding Mode Control is necessary. SMC is based on the states of the system being forced to stay on or in the direct vicinity of a hyper plane in the state space which is chosen in a way that gives the system dynamics desired properties. Other advantages with sliding mode are reduced order dynamics on the switching surface and total insensitivity to some uncertainties and perturbations.

The use of temporary workers gives companies the opportunity to be flexible, by avoiding hiring and dismissing workers because of economic conditions and trends in demand. The management control in use at the company has the purpose of influencing employees? behaviour to act in the company?s best interest and towards its goals. The management control should also influence the behaviour of the temporary worker. The companies have to create motivation and commitment among the temporary workers although they are employed by a staffing agency.