A distributed hydrological rainfall-runoff model has been developed using a GIS integrated with a dynamic programming module (PCRaster). The model has been developed within the framework of the EU-project TWINBAS at IVL Swedish Environmental Research Institute, and is intended for use in WATSHMAN ? a tool for watershed management developed at IVL. The model simulates runoff from a catchment based on daily mean values of temperature and precipitation. The GIS input data consist of maps with soil type, land-use, lakes, rivers and a digital elevation model.

Printed and painted wallpaper on a weaved fabric backing was a common way to decorate homes in Sweden during the eighteenth and nineteenth centuries. Not much is written about the craftsmanship in relation to the hanging of these wallpapers and even less about the conservation of the objects. Even so, many wall segments remain in situ and in museums and are more often than not in dire need of conservation such as deacidification and consolidation. These are composite objects, consisting of cellulose materials with different properties along with adhesives and paints. Analysis of the materials is required to ensure safe handling and choice of conservation materials, and to establish a treatment plan which will be executed in several steps. This thesis aims to identify these steps and develop a method for conserving the wall segments with suitable materials, preferably without altering the source material to any significant degree.

The nitrogen cycle in freshwater bodies is complex and consists of many separate processes affected by a number of important factors for example oxygen concentration in the water, temperature and circulation. Knowledge of the different components of the nitrogen cycle exists; however, a complete and comprehensive picture is difficult conceptually as well as theoretically. The available literature illustrates that the research on nitrogen and the related freshwater processes is still associated with high uncertainty of how much of the supplied nitrogen from the catchment is transported with the water versus and how much is lost due to denitrification, sedimentation or uptake by plants. This report is an interdisciplinary survey of Nitrogen discharge permitting. The research focuses in particular on the decision-making process, the levels of scientific standard and the administrative framework.Application for Nitrogen discharge permits are decided by the Environmental Court with council from their own experts as well as relevant government authorities and organisations.

When building a house or similar the stress on the ground increases and deformations can arise. The deformations create a foundation that the building is not constructed for and damages on the building arise. The increased stress on the ground can be derived back to the building, but it is possible that the increased stress may well derive from different sources such as other buildings or trees.       The building is an older property, built in the late 19th century alternatively early 20th century, and is today used for rental housing and has suffered severe damages due to subsidence. The goal of the thesis is to find possible causes for these subsidences. The thesis was executed as a combination between literature- and casestudie. After careful studies it has been found that a probable cause for these subsidences is trees. Through field- and lab studies it has been found that the trees has effected the ground through there accumulation of water.

För att minska framtida problem med läckor på våra ledningsnät är det viktigt att man förnyar dessa. Planeringen av denna förnyelse kallas för förnyelseplanering. En metod i förnyelseplaneringen är så kallad ?riskbaserad förnyelseplanering?. Denna metod syftar till att hitta de ledningar som innebär störst risk.

This graduation thesis is about baths and beach like places in city centers. It focuses on recreation and the creation and development of public, social spaces in the city containing water as a visual and useable element. The thesis is divided into three parts; background, inspiration and application. The background examines four factors which we consider important for the occurrence of inner city baths; water, the history of bathing, inner city recreation and social life in public places. A discussion of the (future) importance of inner city baths and beach like places' is then presented. The inspirational part is divided into examples of existing places and examples of types of places. The first is used in an attempt to examine the function and importance of inner city baths and beach like places as well as the opportunities and challenges associated with them. The latter contains a presentation of six categories developed by us to facilitate the planning of inner city baths and beach like places.

Slopes in fine till soils are exposed to surface erosion due to rainfall, snowmelt and upland water sources. Large areas of road slopes are therefore covered for surface erosion protection. Preventive methods like ditches and trenches are also being used. Silt tills are particularly troublesome since the water can bring the soil into suspension and cause mudslides. Different methods for erosion protection have been studied in this work, with the emphasis placed on rockfill covering. The need for and the dimensioning of this type of covering has been examined in literature and field studies.

Allanblackia is a genus of trees that grows in the rainforests of West, Central and Eastern Africa. Its big fruits contain seeds very rich in oil which has been used by local communities for cooking and making soaps. The native stands are threatened by overexploitation and the demand for the oil is much greater than the supply. Domestication programs, aiming at introducing the trees to small holder agroforestry systems, have been started for some of the species. The main aim of this study was to investigate the soil requirements of Allanblackia stuhlmannii in terms of chemical and physical parameters, as revealed by the soil conditions in native stands. Another aim was to see if these varied along an altitudinal transect.

The objective of this work was to introduce measures to reduce energy and water demand at Gävle Söder 17:10. To succeed, this energy audit has been made. The work is based on collected statistics from the property owner Norrporten, measurements, literature review and through consultation with experts in the field. Two models, one for each building, have been created in the simulation program BV2 to estimate the potential of energy measures based on the collected information. The models in BV2 have been verified against the statistics of the energy consumption.With the help of calculations and simulations, seven cost-effective measures have been identified.

This master thesis was initiated with the aim to answer at what level of installed capacity of wind power in the northern parts of Sweden it would be beneficial to improve the transmission capacity from the northern Sweden. During the process of this work the aim has changed to try and create a model that can be used to analyze how well the hydro power installed in the northern Sweden can even out the quick changes in wind power production.To create a good model of all hydro power in northern Sweden is a very large job, unfortunately too large for a master thesis. This report therefore ends with an extensive analysis of the simplifications that have been made and their effects as well as a list of the future work that has to be done.The model that has been created have shown to be effective and produce good results. The conclusions that can be made is that the northern Swedish hydro power have very good possibilities to balance the wind power production. Only a few cases where water have been spilled even though there has been some free capacity has been discovered.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.

A pavement construction designed to cope with the different type of traffic loads; it is exposed to and at the same time it can resist the effect of the climate. A road structure consists of sub- and superstructure which is divided by a boundary known as terrace. During the construction of unbound layers (base course and sub-base course) in the superstructure, it is always ensured that the material meet the requirements for bearing capacity and the degree of compaction. These parameters are controlled by various laboratory tests and control methods. To obtain increased knowledge of the material and improve the quality of the compaction in the field, it is necessary to perform laboratory tests in order to determine material properties.A base course material 0/ 32 mm limestone from Gotland (Hejdeby) was investigated in this study.

The weather has been extremely rainy the last summers in Sweden. Because of the rain, a lot of harvested straw has been lost since it was too wet to store. When the pig producers couldn?t get enough straw to use as bedding, an alternative was requested. Silage is a realistic alternative to straw but since silage often contains clover, it may not be suitable to use in pig production since clover is rich in phytoestrogens.

An analysis of a specific application of anaerobic wastewater treatment at a pulp and board mill, Stora Enso Skoghall, was carried out. A literature study was done and effluent wastewater from CTMP pulp production was analyzed. The analysis consisted of a broad constituent analysis and an anaerobic treatment trial. Results from these test where used to calculate the treatment effectiveness and resulting energy potential at the mill.The literature study and constituent analysis showed that toxicity of the water to be treated, due to wood extractives and sulphur content, was of concern. Detoxification chemicals targeting these constituents where used in the anaerobic treatment trial.

ITT Water & Wastewater (före detta ITT Flygt) tittar på att eventuellt genomföra en förbättring av ytbehandlingen av deras pumpar för att eliminera de rostangrepp pumparna utsätts för idag. Examensarbetets uppgift är här att analysera och beskriva miljöeffekterna av de nya ytbehandlingsmetoderna som företaget undersöker.Målet med studien är att få fram ett underlag och en rekommendation om vilken ytbehandlingsmetod företaget bör välja ur miljösynpunkt.De olika metoder som studerats är:? Järnfosfatering + ED-lackering? Zinkmanganfosfatering + ED-lackering? Oxsilan + ED-lackeringDessa metoder har jämförts med nollalternativet, vilket innebär att samma metod som tillämpas idag fortsätter att användas.Miljöeffekterna som studerats för de olika metoderna är:? utsläpp till luft och vatten? avfall? energiAv de tre nya metoderna samt nollalternativet är Oxsilan följt av ED-lackering det alternativ som ger minst påverkan på miljön. Metoden har inga utsläpp av flyktiga organiska ämnen till luft, inget farligt avfall bildas och det avfall som ändå bildas är litet. Metoden har även lägre energiåtgång än de andra studerade metoderna.2008:Nr 2 Teknik.