The focus of this project was to characterize the occurrence of ESBL-­?producing bacteria in two irrigation water ponds in Southern Sweden. Samples were taken from two ponds nearby each other, from which analyses were made based on levels of community and individual isolates. Community samples were used for attempts for characterization of resistance patterns in irrigation water using the Omnilog PM-­?plate system. The growth of community microbiota in the presence of the following antibiotic substances was assessed; amikacin, gentamicin, kanamycin, penicillin G, ampicillin, piperacillin, trimethoprim, potassium tellurite and ciprofloxacin. Isolates were pure cultured using semi-­?selective media: LB, Rainbow Agar, mEnterococcus, 0.1 TSA and VRBD. A total of 177 isolates were isolated randomly. Each isolate was identified using the Omnilog GENIII-­?system of biochemical characterization. Further, the isolates were tested on Brilliance ESBL-­?agar for their ability to grow. Out of the total number of isolates, 30 were selected, preferably Enterobacteriaceae or Pseudomonas spp., based on their high similarity to library strain during the identification in the Omnilog-­?system. These were further characterized using Etest-­?sticks. Three selected strains were picked for further analyses using exogenous isolation for attempts to simulate horizontal gene transfer, and Omnilog PM-­?panels containing various antibiotics of interest. Selections of samples were chosen for molecular tests targeting plasmid-­?borne resistance genes CTX-­?M1, CTX-­?M2 and SHV. The method for assessing community-­?resistance patterns showed ambiguous data that was difficult to interpret; further optimization is recommended. For all tested PM-­?plates, generally greatest differences between substances were found among wells with the strongest concentration of antibiotic substance. A total of 175 isolates displayed ability to grow on ESBL-­?agar. Etests confirmed ability of isolates to resist many ?-­?lactam antibiotics and many were clinically resistant to certain substances. No plasmids were transferred during exogenous isolation. During molecular tests, a few matches were found for the CTX-­?M1 gene. Isolates analyzed with Omnilog PM-­?plates showed resistance to most compounds tested. The isolates showed greatest resistance toward penicillin G, ampicillin, amikacin, kanamycin and trimethoprim. In the study, it was established that resistance among bacteria was frequently occurring in the irrigation water, and ?-­?lactamase producing bacteria was very common. Extended studies are needed to assess the frequency-­? and occurrence of horizontal gene transfer (HGF) in this environment. Although some potential corresponding data is found, it is at this point not possible to determine whether the resistances are due to antibiotics used in veterinary medicine, human medicine or one additional reason is travel and trade. in irrigation water using the Omnilog PM-­?plate system. The growth of community microbiota in the presence of the following antibiotic substances was assessed; amikacin, gentamicin, kanamycin, penicillin G, ampicillin, piperacillin, trimethoprim, potassium tellurite and ciprofloxacin. Isolates were pure cultured using semi-­?selective media: LB, Rainbow Agar, mEnterococcus, 0.1 TSA and VRBD. A total of 177 isolates were isolated randomly. Each isolate was identified using the Omnilog GENIII-­?system of biochemical characterization. Further, the isolates were tested on Brilliance ESBL-­?agar for their ability to grow. Out of the total number of isolates, 30 were selected, preferably Enterobacteriaceae or Pseudomonas spp., based on their high similarity to library strain during the identification in the Omnilog-­?system. These were further characterized using Etest-­?sticks. Three selected strains were picked for further analyses using exogenous isolation for attempts to simulate horizontal gene transfer, and Omnilog PM-­?panels containing various antibiotics of interest. Selections of samples were chosen for molecular tests targeting plasmid-­?borne resistance genes CTX-­?M1, CTX-­?M2 and SHV. The method for assessing community-­?resistance patterns showed ambiguous data that was difficult to interpret; further optimization is recommended. For all tested PM-­?plates, generally greatest differences between substances were found among wells with the strongest concentration of antibiotic substance. A total of 175 isolates displayed ability to grow on ESBL-­?agar. Etests confirmed ability of isolates to resist many ?-­?lactam antibiotics and many were clinically resistant to certain substances. No plasmids were transferred during exogenous isolation. During molecular tests, a few matches were found for the CTX-­?M1 gene. Isolates analyzed with Omnilog PM-­?plates showed resistance to most compounds tested. The isolates showed greatest resistance toward penicillin G, ampicillin, amikacin, kanamycin and trimethoprim. In the study, it was established that resistance among bacteria was frequently occurring in the irrigation water, and ?-­?lactamase producing bacteria was very common. Extended studies are needed to assess the frequency-­? and occurrence of horizontal gene transfer (HGF) in this environment. Although some potential corresponding data is found, it is at this point not possible to determine whether the resistances are due to antibiotics used in veterinary medicine, human medicine or one additional reason is travel and trade..

Direkt viktoptimering (Direct Weight Optimization, DWO) är en ickeparamterisk systemidentifieringsmetod. DWO bygger på att man skattar ett funktionsvärde i en viss punkt genom en viktad summa av mätvärden, där vikterna optimeras fram. Det faktum att DWO har en inparameter som man måste veta i förväg leder till att man på något sätt vill skatta denna inparameter. Det finns många sätt man kan göra denna skattning på men det centrala i denna uppsats är att skatta inparametern lokalt. Fördelen med detta är att metoden anpassar sig om till exempel systemet ändrar beteende från att variera långsamt till att variera snabbare.

Objectives: The aim in this thesis has been to generate information relevant for strategic positioning and future evaluations within the scientific field of sport and exercise psychology. This has been done by request, and in collaboration with The Group of Sport and Exercise Psychology at the Institution of Psychology at the University of Umeå.Research questions:  (1) How does the cognitive structure within the field of sport and exercise psychology take shape with respect to research topics in current sport-psychological research, i.e. the research front? (2) How does the social structure within the field of sport and exercise psychology take shape with respect to formal scientific collaboration?Data: 879 articles published between 2008-2011 were used in this study. The population of articles were collected from a set of 5 core journals: International Journal of Sport Psychology, Journal of Applied Sport Psychology, Journal of Sport and Exercise Psychology, The Sport Psychologist, Psychology of Sport and Exercise.

Report of diploma work conducted at the Swedish Radiation Safety Authority (SSM) as part of the bachelors program in Nuclear Engineering at Uppsala University.All nuclear power plants in Sweden are obliged to report any deficiency in their barriers or the defense in depth in obedience to SSM?s regulations concerning safety in nuclear facilities. In addition, there is an international system for reporting such events. The purpose of this thesis is to study the Swedish report system and to analyze the differences between Swedish and international event reporting.In the Swedish system, SSM?s regulations are effectuated by means of event reports classified as category 1-3, designed individually at each Swedish facility.

Background: Today businesses are largely structured in projects and temporary organizations. In many companies, the ability to pursue projects is decisive for the business efficiency and competitiveness. The risk literature do not discuss identification and handling ofproject risk in building- and construction companies to a large extent, which has led us to investigate how project risk can be treated and handled in Swedish building- and construction companies. Purpose: The purpose of this thesis is to cover and describe business risk in Swedish building- and construction projects with focus on different risks and risk tools, and also to modify a model for evaluating the business risk maturity. Realization: This thesis has both traces of a case study and a cross-section study and examines eight different companies that are active in the building- and construction business.

En transportbo?rs a?r en elektronisk marknadsplats da?r transportsa?ljare kan annonsera ledig kapacitet till fo?rsa?ljning och transportko?pare kan ge fo?rfra?gningar pa? transporter. Na?r akto?rerna pa? transportbo?rsen har hittat en sa?lj- eller ko?pannons som passar deras behov sluter de avtal om en transport. Transportbo?rser underla?ttar fo?r transportsa?ljare att o?ka sina fyllnadsgrader samtidigt som den a?ven underla?ttar fo?r transportko?pare att hitta transporto?rer.

In some cases there are no methods to identify raw material which are included in dietary supplements such as tablets. The identification can be done with TLC. A general method description was developed using the raw material gotukola and appel cider vinegar. This includes processing to achieve higher concentration of the active ingredient if needed; evaluation of solubility agents to dissolve the active substance; evaluation of mobile and stationary phase and visualization of the stationary phase. The report also includes an evaluation of stationary plates..

This report is a degree project performed at Freudenberg Household Products AB, (FHP). The degree project comprises measurement and analysis of the power net at FHP Basproduction. The content is divided between one theory-part, one document- part with measurements and also conclusions and a list of measures to be taken. During the project the purpose and restriction change from a quality investigation to only concentrate on harmonics and finding the reason why they exist, and also to find a solution to the problem with harmonics. The measurements shows that the power net contains harmonics of different order and intensity.

There is a lot of research made on second language (L2) learning (Jesney, 2004). However the relationship between foreign accent, intelligibility and acoustics within pronunciation tutoring is quite an unresearched area (Thorén, 2008). The aim of the study was to analyze how a course in Swedish pronunciation affected foreign accent, intelligibility and acoustics among L2-learners of Swedish. A total of 41 people participated in the study: 16 L2-learners, 4 native Swedish speakers consisting a control group and 21 perceptual assessors with Swedish as native language. The L2-learners foreign accent and intelligibility were rated by the listeners before and after a course in Swedish pronunciation on an eight-point Likert-scale.

Användandet av trådlösa sensorer inom byggindustrin är relativt nytt. Sensiblesolutions AB har utvecklat en produkt för fuktindikering som kan användasi t.ex. lätta utfackningsväggar. Systemet bygger på att två styckenpassiva RFID-taggar fästs på ett kort med ett mellanrum så att inte taggarnastör varandra. Den ena är täckt med en fuktabsorberande pappersbit som tarupp fukt ur den omgivande luften medan den andra är öppen mot omgivandeluft.

Active headsets have been on the market for years and now it is time for something else to enter the stage. The technology of active noise reduction can for exmple also be used in ventilation systems for reducing ventilation noise. An active control system principally consists of four important components, namely the downstream error microphone, the upstream detection or reference microphone, the digital signal processor (DSP) and a loudspeaker. The upstream reference microphone listen to the primary ventilation noise and sends it to the DSP which makes a phase shift to the signal and sends it to the loudspeaker. The loudspeaker sends out the opposite waveform of the incoming one and reduce the primary ventilation noise.

The project was performed at SiemensIndustry Drive Technologies with theobjective to provide actual values forthe energy savings potential withinSiemens scope of practice.In Sweden the electrical drives standfor about 30 % of the total electricityconsumption and about 60 % of theelectricity consumption within theindustry. During the pre-study phaseelectrical drives with pump applicationswere identified as large energy users.Because of this a case study at one ofSiemens customers, Stora Enso Fors wasperformed. The system that was evaluatedduring the case study was a throttledsystem with a centrifugal pump forpumping pulp.The results yielded that a saving ofover 50 % could be achieved by replacingthe throttle valve with a variable speeddrive, a frequency converter. Thepayback period was two years and twomonths and the present value for thetotal life cycle cost of the variablespeed system was 662.566 SEK lower thanfor the throttled system. As aconsequence, Stora Enso Fors is advisedto invest in a frequency converter forregulation of the system.The general conclusion is that a focuson system efficiency is the mostimportant factor in energy efficiencyprojects and that the system regulationmethod has a large impact on the overallsystem losses and hence its efficiency.Energy efficiency potential forthrottled systems with centrifugal pumpsis large and significant economicalsavings can be made through investmentswith short payback time..

Syfte: Debatten kring revisorers oberoende har pågått länge. Idag är frågan om revisorers oberoende en av de viktigaste frågorna inom redovisning vilket delvis beror på de företagsskandaler som inträffat under senare år. Tidigare studier visar att sociala identifikationer kan utvecklas vid nära relationer vilket både kan ha en positiv och en negativ påverkan på revisorers oberoende. För att utvidga tidigare studier har vi lagt till personlig identifikation för att studera detta på individnivå. Vi har även valt att lägga till en faktor, det karismatiska ledarskapet, för att undersöka om detta påverkar samtliga identifikationer.

This thesis aims to investigate possible positions of identification for people with dis/abilities. With a theoretical basis in crip-theory it discusses the notions of power and deviance and its? importance for the formation and reproduction of ideas around the concepts of dis/ability, ableism, deviancy and normality..

Följande rapport redogör för det utvecklingsarbete som hade som målbild att kombinera två produkter från X-ponent Stålinredningar AB, nämligen ordning-och-reda-systemet ToolTracker och ett verktygsskåp benämnt X-102.Detta utvecklingsarbete pågick under kursen KPP305, Examensarbete Produktutveckling, på Mälardalens högskola.Uppdragsgivaren X-ponent Stålinredningar AB hade under en tid utvecklat det intelligent ordning-och-reda-system, ToolTracker, och genom en efterfrågan på marknaden har företaget känt ett behov av att vidareutveckla detta system och placera detta i ett verktygsskåp.Denna produkt skulle fungera så att användaren loggar in i systemet via en RFID-läsare placerad på utsidan av skåpet, och samtidigt som en godkänd inloggning sker så låses skåpet upp automatiskt och användaren får tillgång till de verktyg som finns i skåpet. Väljer användaren att checka ut ett verktyg registreras tidpunkt för detta samt vem som tagit verktyget i systemets databas för att möjliggöra spårning av verktyget.De direktiv som företaget gav för projektet var att det befintliga ToolTracker-systemet skulle verka på samma sätt som tidigare, vilket gav avgränsningar mot att påverka ToolTracker-systemet.De problem som skulle lösas var således hur ToolTracker-systemets komponenter skulle placeras i skåpets utrymme, samt hur låskonstruktionen skulle utformas för att uppfylla de krav som ställts. De viktigaste funktioner som låskonstruktionen var tvungen att inneha, var att kunna låsa upp skåpet automatiskt vid inloggning, skåpet ska låsas automatiskt då dörren stängs samt att låset skulle kunna låsas upp manuellt. Dessa krav samt ytterligare en mängd krav kunde formuleras i den kravspecifikation som togs fram och låg som grund för arbetet. Ett genomgående viktigt krav i hela arbetet var att förändra det ursprungliga skåpet så lite som möjligt.När kraven tydliggjorts kunde en mängd idéer tas fram och utvecklas vidare till fullgoda koncept.