Milk fat is an important feature in many different milk products and other foodstuffs and it is often crucial for the dairy plants that the milk fat is stable for different manufacturing processes. Lipolysis is the enzymatic degradation of fat and is the one of the causes for an elevated amount of free fatty acids (FFA) in milk. Further, the change in fatty acid (FA) composition in milk can affect the stability of the product and also the manufacturing process. Both internal and external factors, at farm level or at the dairy plants can affect both FA composition and content of FFA. Milking frequency (MF=number of milkings per cow and day) and the composition of feed are two examples of factors generally performed at farm level. The objective of the present study was to evaluate how FA composition of milk and amount of FFA are influenced by two different ingredients supplemented to concentrate.

Vad betyder bloggen för den som bloggar? Genom tre unga tjejers röster är syftet att förstå vad bloggandet betyder för dem. Samtidigt är det att se vad det har för inverkan på identitetsskapandet. Arbetet handlar också om att skapa ett rum för lyssnande, där informanternas röster är tonsättare och grunden i arbetet. Genom ett radioreportage där Johanna, Tova och Camilla själva berättar om sin syn på bloggandet, har jag försökt att sätta fingret på vad det är bloggen ger tjejerna som skolan inte gör. Med en konstruktivistisk syn på identitet har metoden för närmandet varit kvalitativintervju med inspiration av radiojournalisters syn på intervjuer.

During the last 50 years the production of milk per cow has increased. This has, however, been followed by a decreased reproductive performance. Shorter and more indistinct signs of oestrus make it harder for the Swedish farmers to discover when the cows are in oestrus. There is a need for ways to control reproduction. The use of pheromones could possibly provide means to satisfy this need.

Fog is a small-scale weather phenomenon that are fascinating to people. However, the presence of fog in road traffic reduces the visibility and increases the risk of road accidents. By the Swedish Road Weather Information System (VViS), the safety on roads could ameliorate and road accidents caused by fog and other weather hazards could be prevented. Fog is however a complex and usually local phenomenon, why fog formation generally is not easy to predict. For that reason, a statistical mapping of fog, especially along a motorway with high traffic volumes, could be useful in planning to prevent road accidents.

The Clinical Pathology Laboratory at SLU in Uppsala has analysed several blood samples from Dachshunds with severe anemia. As there are no previous studies on this topic, a study was performed to evaluate if Dachshunds are more prone to severe anemia compared with other breeds. In addition, a retrospective case study on Dachshunds with severe anemia was done to search for common risk factors or diseases. Hemoglobin values in samples from 1272 Dachshunds and 2269 German Shepherds analyzed from September 1994 to October 2007 were used to compare the frequency of severe anemia in Dachshund and German shepherd. The samples were identified by laboratory information system.

Background - Swedish trade and industry primarily involves small corporations, including small manufacturing corporations. Currently, most costing models that are used are based on studies accomplished at large corporations. This conveys to the fact that product costing that occurs at small manufacturing corporations is based on all complexities that large corporations bring, which rarely match with small corporations. It occurs that small manufacturing corporations unconsciously rely on incorrect information that has been calculated based on great corporations? product costing.

Background: IT-security is included in the concept of information security, which considers all the security of handling information within an organisation. Good IT-security is about finding the right level of measurement, however, it is hard to implemement new IT-solutions in an organisation, particularly within the health care field, where sensitive information are handled daily. Lately the Swedish government, together with county- and city council, understand the importance of IT and health care. Carelink, an organisation of interest, is working actively for the presumption of benefit by using IT within the health care field. During spring 2006 the Swedish government introduced a national IT-strategy.

The aim of this study was to provide SCA Forest Norrbotten District with material to assist in their work towards decreasing the frequency of bucking splits in their saw timber logs. SCA Forest supplies the Munksund sawmill with pine timber. Periodically the sawmill experiences problems related to bucking splits in their logs. The purpose of this study was to find an available method to measure the occurrence of splits directly on incoming timber. The ambition was also to gain some knowledge about possible variations between different logging crews in terms of split frequency. If possible, this information could be used to investigate if certain crews produced more splits than others, and thereby making it possible to provide feedback to the logging machine operators. The study consisted of two major parts, a literature review, and a practical sawmill study.

To design new and high tech products the engineers rely more and more on computer based simulations to investigate the properties and behavior for a component or system.To verify these computer based simulations the dynamic properties for the components of the drivetrain needs to be verified. Therefore measurements of the stiffness and vibrations for the rear axle has been performed. This report show how the measurements has been implemented and evaluated, along with some interesting results for the rear axles properties.The static stiffness for the drive shaft along with the axle-gear has been determined. It is found that the stiffness for the whole rear axle is near the stiffness for the drive shaft, which means that the drive shaft becomes the dominant component of the system and affects the rear axle stiffness the most. The measured stiffness of the driveshaft is close to its theoretical stiffness.The stiffness for solely the hypoid-gear have been calculated using the stiffness for the rear axle and driveshaft, and thus has a range for the stiffness of the hypoid gear been determined.The backlash for the whole rear axle and for some individual components has been determined, where the backlash between pinion and crown-wheel has negligible impact on the total backlash.Measurements of the crown-wheel and pinion movements have been conducted, where the direction of movement is consistent with the theoretical direction of the forces.The vibration measurements show that the vibrations are more severe at certain rotational speeds.

The aim of this study is, from a norm-critical approach, to find, investigate and analyse human representation in the visual culture of one preschool in order to understand if the children enrolled are represented or not. The research questions are: In what ways is there imagery of human representations in images and materials designed for play? What skin-colors and origins are dominant in the data collected?We carried out a qualitative study in the form of visual ethnography. This method allowed us to use a combination of different data collection tools such as photography and ethnographic field notes to collect our data. The photographs we took of images and material used for play, was then analysed through semiotic picture analysis.

The aim of this thesis is to improve the control of urea injection at the combined power and heating plant Framtidens Gärstad (FTG). Tekniska Verken i Linköping AB is the owner of the plant.The FTG plant consists of a boiler where garbage combustion is done. From the combustion nitrogen oxides are emitted. These nitrogen oxides are hazardous to the environment. To reduce the nitrogen oxides, injection of urea into the boiler is used.

Min målsättning med denna uppsats har varit att forska kring hur kortvågsradion kan öka rörligheten på svenska förband i utlandsstyrkan. Inledningsvis har jag definerat vad jag menar med manöverkrigsföring, uppdragstaktik, de sex grundläggande förmågorna och radio. Jag har intervjuat individer som varit på enheter som rört sig i terrängen i Afghanistan och Kosovo. Jag har sedan diskuterat kring hur man kan öka rörligeheten genom att använd sig av uppdragstaktik och kortvågsradion. Jag har jämfört ledningsätt och radioanvändande mellan Afghanistan och Kosovo och dragit slutsatser från detta.En av slutsatserna som har dragits ur uppsatsen är att det är räckvidden som möjliggör en högre rörlighet genom att enheterna inte blir styrda till att hålla sig inom t.ex.

To identify the exchange and adaptation that takes place in the business relationship between electricity suppliers and electricity customers and analyze how these factors affect the strength of the relationship.The investigated concepts create synergies. The strength of the business relationship in the current situation is dominated by weak reciprocity in adaptation and an inefficient exchange of information with low frequency..

The purpose of this thesis is to investigate the possibility to make small, cheap and ultra low power sensor platforms, connected in wireless networks for monitoring of home and industrial environments. The concept is based on ideas from our supervisor, Jerry Lindblom. The developed system consists of a generic platform for different sensors, a receiver and software. A GPRS module from RO Rollytech AB and a database from Gema Industri AB have been modified and used to demonstrate an example of a complete system. To the platform, it is possible to connect any resistive sensor and any sensor that can act as a switch.

Visualization plays a key role in the concept of Lean. Lean was developed in Japan as a business philosophy in order to lead to an activity, where only steps that contribute to customer value of the final product are being performed. By defining the customer value and establish visualized standards, it is possible to see when situations differ from the standard. Then it?s possible to lead the process back on track.