The energy that the earth receives from the sun hourly has potential to cover a year?s energy demand in the world. Further, this type of energy is environmentally friendly, natural and free of cost. This report covers solar energy in an urban environment and consists of a case study of installations of photovoltaic cells in a part of the city of Stockholm. It is mainly the economic aspects that are covered but there is also a discussion about the practical consequences and the sustainability as a result of integration of solar energy in an urban environment. The aim of the study is to present results from economic calculations for utilization of solar energy in chosen buildings in Kungsholmen in Stockholm.

It always has been a need for the abiltiy to create color proofs. When an error occurs late in the production process, itis allways complicated and difficult to correct the error. In this project, digital proofs been made and discussions havebeen held with several people in the printing industry, in order to examine how well excisting digital proofs, meet thedemand of the market. And how close the digital proofs can come to the actual printsheat from the press. The study hasbeen shown that the one thing that has had the most influence on the outcome for the quality of a digital proof, is theprintshop operator?s knowledge about color management and proofing systems.

A Biogas plant in SLU?s (Swedish University of Agricultural Sciences) management sustains to behave in con-nection with the new animal stables at Lövsta. There will primarily manure from stables that rot to biogas. The biogas plant will also have the capacity that rot others substrates that can arise in the farm operation. The aim with the biogas plant is to produce non fossil electrical and gas heat for own customs, to reduce smell impact from stables and to make possible different types of research investments within the area.This study has implemented multiple cases study of different investment scenarios.

This Master of Science thesis was a part of Pharmadule Emtungas project to construct a mobile automated cell for welding of carbon steel pipe (Heating, Ventilation and Sanitation). Pharmadule Emtunga is using a modular building concept for building pharmaceutical factories. The modules contain these pipes. The goal of the thesis was to present concepts for technical solutions regarding welding methods and fixtures for the cell. Conceptual models for the cell were made with aid of CAD software.

DeLaval distribuerar fullständiga mjölkningssystem vilka säljs på drygt 100 olika marknader över helavärlden. Det finns alltid en strävan efter att leverera beställningar till kund i tid. Direktören förInköp ochLogistik Asienpå DeLaval i Shanghai har uttryckt ett behov av att undersöka hur informationen böranpassas så att ett stöd för supply chain uppstår med syftet att förbättra tiden för leverans till kund.Detta resulterade i en utredning att kartlägga behoven i informationsflödet och vilka system sombehöver stöd för att möjliggöra leverans i tid till kund. Det finns ett mått vilket kallason time in full(OTIF) som används av DeLaval för att mäta leveransprecision för slutkund. Detta var grunden för attföljande frågeställning kunde formulerades:Hur kan informationsflödet inom supply chain anpassas föratt förbättra OTIF?För att kunna svara på denna fråga kom författarna fram till att en fallstudie var den mest lämpademetoden att gå tillväga.

Detta kandidatarbete behandlar tillverkning av tubreaktor och katalysator för att producerametan från syntesgas i laboratorieskala. Den tillverkade nickel-alumina katalysatornsprestanda utvärderades för att undersöka möjligheterna att producera metan i tillräckligmängd för att driva ett fordon. Det finns en förhoppning att på Chalmers producera etteget fordonsbränsle till studenternas bidrag till Shell Eco-marathon, en tävling för bränslesnålafordon. Testerna av reaktorn används för att öka förståelsen för metaniseringsreaktionensamt att bidra till att förverkliga visionen med kommande kandidatarbeten.Projektet innefattade flera parallella delsteg. Reaktorframställning innefattade dimensionering,design och tillverkning av en reaktor.

This thesis work was made for Södra Cell Mörrums bruk in Blekinge. The purpose of the work was to develop a computer model in the simulation program Extend for the removal and balance of organic oxygen consuming substances, measured as COD (Chemical Oxygen Demand), in the new biological treatment plant in the mill. The plant produces two different pulp products, TCF- (Totally Chlorine Free) pulp and ECF- (Elementary Chlorine Free) pulp, for sale. The different bleaching procedures affect the characteristic of the wastewater and thus the effectiveness of the biological treatment plant.In the model that was developed the COD in the wastewater was divided into five different COD-fractions: soluble easily degradable (SS), soluble hardly degradable (SR), soluble inert (SI), particulate inert (XI) and particulate biomass (XB). To create the model FlowMac? was used as a base.

This thesis is a part of the DySCAS (Dynamically Self-Configuring Automotive System)project which has the overall purpose of creating a middleware for the electronics in an automotive environment. The thesis has been made with collaboration with ENEA AB who is a member of the DySCAS project. ENEA AB has developed a demonstration platform to test the fundamental ideas which the DySCAS project is built on.The purpose of this thesis was to design and implement a GPS application to be added to the demonstration platform. This was done by adding a GPS receiver to the original DySCAS demonstration platform and designing and implementing an application to be able to extract the information from it. The resulting application is able to present cur- rent position and absolute time to the DySCAS networks as services to be used by other applications or by the network it self.

I alla mjukvaruprojekt spelar mjukvarutestning en viktig roll. Om enprogramdefekt inte upptäcks och rättas innan systemet sätts i produk- tion, kan detta leda till betydande förluster för organisationen.Scanias kunder har möjligheten att skräddarsy sina fordon, efterkundens egna behov, istället för att välja bland en uppsättning färdigamodeller. Denna praktiskt taget oändliga uppsättning teoretiska model- ler medför dock svårigheter inom testning.En elektronisk styrenhet (ECU) är ett inbyggt system som kon- trollerar ett eller ?era av de elektroniska systemen i ett fordon, t.ex.motorn, kraftöverföringen och luftkonditioneringen. När fordonen läm- nar produktionen parametersätts deras ECU-parametrar efter ett regel- verk som anges i kon?gureringsprogrammet Parameter Setting Module(PSM).

Abstract Title: The Future of ABC at Sandvik Tooling ? Incorporating ABC with information systems in order to drive business development from a cost point of view. Authors: Jenny Andersson and Camilla Salomonsson. Supervisor: Charlotta Johnsson ? Department of Automatic Control, Lund University.

Today´s roofing of dwelling houses is a very time consuming procedure, which includes a lot of different steps on the construction site. Not only does it cost a lot of money, but often do problems with rot and mold occur in the attics of houses today. The use of prefabricated modules has seen a great breakthrough in the field of construction of dwelling houses; at least when it comes to foundations and walls, where this type of approach makes the construction process way more efficient. What no one previous has succeeded to develop is a corresponding system for roofs that meets the demands of a dwelling house. Accordingly the goal of PlusTak has been to come up with a proper module system for roofing of dwelling houses, where the roofing is completed to meet the demands of the Scandinavian market. During the project a lot of effort has been put into customer contacts and the usability of the product, as well in the manufacturing process as on the construction site. This development has gone hand in hand with several practical tests and tryouts.

BAE Systems Hägglunds has a long history of producing high performance terrain tracked vehicles (mostly for military applications), and they are now aiming at developing a tracked forwarder with similar techniques.The forwarder will be of series hybrid type where a diesel engine via a generator will power the motors (one for each drive wheel). Thanks to individually controlled motors and the gentle rubber tracks, this forwarder is calculated to have a considerably higher average speed in the terrain and to be more gentle to the soil. The forwarder with a weight of 11 metric tons and a load capacity of 15 metric tons is specified to have an average working speed of 7-10 km/h, a top speed in terrain of 15 km/h and a top speed on roads of 40 km/h.This master?s thesis aims at developing a conceptual design of the forwarder?s drive module which includes electric motor, gear unit, brake and drive wheel.To investigate if the requirements can be fulfilled a study of the dimensioning loading scenarios has been carried out. The resulting needs regarding the torque has been considered in order to determine the required gear ratios for different motor options.

Idag blir det allt vanligare med träbyggnader högre än två våningar. Detta tillsammans med en modern arkitektur som ger stora öppna planlösningar ställer höga krav på bjälklagen i träbyggnader. Problematiken med långa spännvidder för bjälklag i trä är att klara kraven för svikt och nedböjning. Dessa krav måste uppfyllas för att säkerställa funktioner hos andra byggdelar och för att människor inte ska uppleva att golvet sviktar eller vibrerar på ett obehagligt sätt.Ett träbjälklag bestående av limmade balkar av sidobräder har utvecklats. Bjälklaget är utformat av balkar med I-tvärsnitt i primärriktningen och rektangulära balktvärsnitt i sekundärriktningen.

The aim for this study where to investigate the frequency of cutting cracks in saw timber harvested in the storm-damaged forests in regions where the storms Hilde and Ivar hit. The idea for this work came from one of the region?s biggest actors, SCA Skog and Jämtlands district. The purpose where to find out how big proportion of the saw timber that contains cutting cracks, their financial cost in lost wood value and also give advice and suggestions on how to work against the frequency of cutting cracks. For the field-study some guidelines where used to make sure that the samples were taken under the same conditions, they were: ? The field-study must be performed under harvesting of storm-felled forest, which are horizontal/inclined trunks. ? The averaged sized tree will make it possible to harvest saw timber. ? The trunks can?t be root cut. A methodology called in Swedish ?Trissmetoden? was used because it is the most frequent used methodology in earlier performed studies and the only one that can be used I field. Under the field-study data were collected from 570 saw timber logs, 30 logs from each one of the tested harvesters.

This report is a result of a project that been conducted on System Andersson. System Andersson sells and develops MPS-systems for small and medium sized manufacturing companies. System Andersson are today located in the central parts of Jönköping and has about 20 employees. The goal for the project is to develop a new version of Andersson Qwick mps. The project has been divided into a number of smaller projects were the authors been part of the planning module project.