This report is the result of a thesis work done at the Department of Engineering Sciences, Uppsala University, and includes 15 ECTS points. The work has been performed at Företag A, a company specializing in electronics whose major product has become a sophisticated tool used by authorities across northern Europe. Företag A has initiated a quality management system according to the criteria set by ISO 9001. Following demands from customers, Company A has now decided to also start working towards a certification according to SS-EN ISO 9001:2008, this work is the foundation for the thesis work. The thesis work has been limited to the production process and the aim has been to enable this process to be certified according to ISO 9001:2008. The work has been performed by analyzing the existing quality management system and the requirements for each process included, whereby the gap between the current and the target state has been mapped. Suggestions have then been made on how this gap can be filled, some of these suggestions have also been carried out during the thesis work. The conclusions drawn are that quality management does not have to be complicated, but quickly becomes so when the complexity of the processes increases.

In order to counteract and to discover unethical actions within an organisation, a growing number of Swedish companies implement a so-called whistleblowing system. The purpose of our essay is to study the mindset of companies and further analyse how this mindset affects the design and quality of companies' whistleblowing systems. To do this, we have used a qualitative approach by interviewing different Swedish companies about their mindsets and systems. The study determines that there seemingly are three different categories of systems of varying quality. In this study we have chosen to call them "internal system", "external system" and "combined system".

 Conclusion:Medical treatment may have a role in platelet count after transfusion. Since the TACSI platelets passed the quality requirements, and the vast majority of patients platelet count increased after TACSI platelet transfusion, the TACSI platelets will replace the old method to produce platelets at the Uppsala University hospital.  Methods: A new approach that pools 8 buffy coats (TACSI platelets) that were separated into 2 units instead of 4-6 buffy coats pooled to 1 unit was investigated in this study. After the platelets were extracted from the buffy coats their quality was controlled and subsequently the platelet product was evaluated in 96 patients. Results: The results showed that 80 % of the platelet units passed the European quality requirements. Further, the platelet count was increased in most patients that received TACSI platelets. Conclusion: Medical treatment may have a role in platelet count after transfusion.

The purpose of this master?s thesis was to find problems that occur in the production line at Atlas Copco Rocktec Division, in order to decrease the costs of defect in quality. When the problems were distinguished, the authors ought to choose the problem with the highest improvement potential. One request from the constituent at Atlas Copco Rocktec Division was to connect the improvement to the document The Way We Produce. The document provides information and values about Atlas Copco and consists of 10 principles to be able to reach their vision.

ABSTRACTProblems with high turnover in nursing has escalated during the last years both nationally and internationally. according to previous research job satisfaction and quality of care was connected to specific features of the hospital work environement. It was also recommended by Coomber & Barriball (2007) to analyze job satisfaction at ward level with qualitative interviews to get a deeper and more extended insight in which specific features are of importance.The aim of this study was to investigate and describe the experiance of job satisfaction in relation to quality of care from nurses perspective. This study was carried out at an orthopaedic ward with primary nursing as organizational context of care.Two focus group interviews were conducted, they comprised nine nurses with at least two years experiance of primary nursing. A qualitative content analysis with inductive approach was used in order to develop more detailed insights of potential factors influencing work satisfaction at ward level.

In our everyday life we are constantly affected by sound; at home, on our way to and from work, when taking a walk through the woods and when we sleep. In discussions about sound one often talk about noise and to what degree a certain noise disturbs us. The positive qualities of a sound and what sounds contribute to the experience of a good environment is rarely discussed. The question of sound and the quality of sound is given more attention through the expansion of Stockholm, the city is becoming both bigger and more crowded. This raises new questions concerning the planning of the city e.g. should the changes of the sound quality in a place be one of the aspects taken into consideration when planning new buildings, are there ways to improve the sound quality in new building projects? Can we even improve the quality of sound in existing places by simple means? I have chosen to study four different areas in Stockholm; Hötorget, Mariatorget, Berzeliipark and Norrmalmstorg.

The vertical electronic excitation energies for the narrow-bandgap polymers LBPF, EP37 and EP62 have been calculated using Density Functional Theory (DFT). Also the vertical excitation energies for the acceptor unit of LBPF have been calculated using the Hartree-Fock (HF), DFT and Coupled Cluster (CC) methods. The calculations cover the visible and infrared wave length region and two strong transitions are obtained, one corresponding to the pi to pi* transition and one corresponding to the pi to Acceptor transition. The excitation energies obtained from DFT are below the corresponding experimental results and attempts have therefore been made to perform bench-marking calculations using a hierarchy of CC methods..

Heartwood has always been a desirable part of the tree, due to it?s superior decay qualities com-pared to the sapwood. How the formation of heartwood works has been known for a long time, but which factors that initiates and stimulates the production are poorly understood. This case study presents the results of a study in which silvicultural treatments and site properties had a key position as factors to the formation of heartwood. According to the hypothesis the amount of sapwood is directly controlled by the size of the crown.

Documentation in electronic journals is perceived as time consuming and sometimes technically difficult to handle, but also leads to an improved quality of care. Objective: The purpose of this study was to investigate nurses' perceptions of documentation with a focus on timing, technique and quality of care and whether any differences in these perceptions were dependent on age. Method: Quantitative descriptive cross-sectional study in the survey form, 28 nurses at a university hospital in central Sweden participated in the study. Regression analysis was performed with Spearman's rank correlation coefficient. Results: Electronic documentation takes 30 to 60 minutes for most nurses and half of them considered it a reasonable time.

The aim of this report is to develop an improved basis for calculation of common costs as well as to create a support, showing which steps can be taken for improving the future monitoring at NCC Hus in Karlstad.The objective of this report is to improve the quality of the process of quoting by verifying current key numbers, production of new key numbers and to identify the problems affecting the monitoring of projects.The objective is also to provide suggestions of actions improving quality assurance at NCC Hus in Karlstad..

In this paper, I have proposed a way of interpreting the philosophical subject of the Discours de la méthode that has remained relatively unexplored by contemporary commentators. By investigating the subjectivity that is expressed through Descartes? use of architectural metaphors, I laid bare some of the difficulties inherent in its discursive structure, as well as suggesting that the cogito in fact repeats and inscribes itself into this structure. In this context, the metaphor of the road (or travel) takes a supplementary role in relation to the architectural metaphor, marking the very conditions of existence of the architectonic subject. The subject, in order that it may establish itself as ?pure? and ?independent? thought, is dependent on a certain ?forgetfullness?; that is, only by forgetting its constitutive dependence on the diversity and historicity that is signified by the metaphor of travel, can it establish itself as its own source.

Old people's life situation when receiving municipal help and care in theirlast period of life is sparsely investigated from their own perspective. Thepurpose of this study was focused on the thoughts of the aged people andtheir personal experiences on what quality is within the geriatric care. Inthis qualitative study, 10 elderly people aged 75-90 years wereinterviewed from 3 different nursing homes within Solna Municipality.Qualitative interviews, with the emphasis on their present life situationespecially what brought about a good life, were performed. The interviewswere analysed using qualitative content analysis. The implication of theterm ?meaningful existence? is individual and differs from person toperson.

The purpose of this study was to investigate produced laser data from the new national height model's airborne laser scanning in Sweden, what quality it has and whether it can be used for forest management planning. From airborne laser scanning one can obtain information on forest variables such as tree species, height, diameter and basal area. Norra skogsägarna is the principal employer of this project and they wanted know to the quality of the laser data which needs to cope with their standards. If the laser data the quality required it can replace some of the operations performed by field planners. To examine the quality of the produced laser data a control tax assessment has been performed in 30 forest departments. This was done in an objective manner.

Since Sweden joined the European Union all Swedish fruit and vegetables are classified according to EU Quality standards. One important function is the product description and how it can facilitate the trade; for example in better comparing prices and also to guarantee the quality of the product. This quality standards or product descriptions are written as words of an Act and obligatory for all countries that has joined the EU. It?s often a demand from the customers to be certificated according to some of many certificating systems. One example is the common worldwide GLOBAL GAP-certification system created by the organisation EUREP which represents the leading European retail traders.

AbstractThis bachelor?s thesis at the Department of Production Engineering at the Royal Institute of Technology in Stockholm deals with the subject of automated metrology. The degree of automation of tasks within production has been a growing trend but the measurement of quality has not followed the same trend. The main thesis follows:What incentives are there to automate the measurement of quality in production?What factors are crucial and why are not all metrology automated?The thesis comes along with a number of sub-queries and delimitations.The working method includes both theoretical and empirical studies.