The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

This diploma work has been conducted for the consulting company Ramböll inUppsala, Sweden with the purpose to perform a study with the calculation programFEM Design 9.0 made by Strusoft. The aim has been to find out if it is possible to gainadvantage by utilizing more advanced 3D software for design calculations, instead ofthe traditional methods currently used in construction works.The method of approach has been to model an existing warehouse building with theprogram FEM Design, and then compare the results with those attained with FrameAnalysis and hand calculations. These results are then analyzed. An evaluation is maderegarding to what benefits can be achieved using a more advanced 3D-model.The results of the study show that the differences between the methods are not ofany significance with regard to the design of the steel frame. However in morecomplex materials such as reinforced concrete, the differences become more notable.The conclusions drawn by the authors of this study into FEM Design are that theeducation requirements of the program are higher than for simpler programs, whosepurpose are solving predetermined problems.

Denna rapport redovisar den process som utvecklingen av OTWs nya webbplats har inneburit. Jag har arbetet med att skapa en ny design av deras nuvarande webbplats där syftet har varit att skapa en webbplats där man presenterar sig själva på ett bra sätt och ställer mindre krav på redaktionellt innehåll samtidigt som man följer konventioner för branschen och målgruppen. I utvecklingen av webbplatsen anpassar jag mig efter rådande designprinciper och riktlinjer för användbarhet så att webbplatsen ska bli så lätt att använda som möjligt. Utvecklingen av prototypen har skett i mjukvaruprogrammet Axure RP. Resultatet av projektet är två interaktiva digitala prototyper i form av en mobil version samt en desktopversion.

For research purposes Saab has developed a generic mathematical model denoted VEGAS of an aircraft with a configuration similar to JAS 39 Gripen. Today parts of Gripen backup control system are used also for VEGAS making the system subject to both corporate and defense secrecy. The main objective of this master thesis is to design, verify and implement public pitch axis flight control system for VEGAS. Furthermore, simplifications regarding the design process is to be examined. Design of pitch axis flight control system for the entire flight envelope has been carried out.

Bakgrund: I konkurrens om morgondagens konsument kommer sannolikt materiella värden inte räcka till. Företag måste också kunna erbjuda immateriella värden genom upplevelser. Ett sätt att göra detta är via produktens design. Den företagsekonomiska relevansen understyrks ytterligare av det faktum att lite forskning finns kring immateriellt värdeskapande och design. Syfte: Syftet med uppsatsen är att bidra med förståelse för hur design kan tillföra immateriella värden till en produkt.

The purpose of this study was to follow a research-oriented design process and to develop a design draft for a digital service that supports users to make more environmentally conscious choises in their everyday life. By following an interaction design process from start to final delivery, the study aims at creating a broad understanding of the process. Therefore, many userrelated activities were implemented in the study: eg. personas, scenarios, sketching and user testing. The project resulted in digital wireframes for an iPhone application using embedded GPS to identify and locate environmentally friendly businesses.

In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

The purpose with this thesis is to investigate how the logistic and the configuration of the terminal buildings and the perceptions of the passengers at Stockholm Arlanda Airport are related to each other, and what effect it has on the passengers and their traveling within the airport.The focus will be on the logistic at all four terminal buildings that is within the Airport. To create a perception of the logistic at the Airport and how it is related to the passengers perceptions, the investigators need to make knowledge of the terminal buildings, and thereby try to link the logistic with the perception of the experience room.Swedavia is the company that own, operate at and manage Stockholm Arlanda Airport. The investigators will make an interview with employees at Swedavia to get a more profound understanding of how the company is thinking about the logistic issues that they need to overlook. There will also be interviews with travelers to get their perception of the logistic, design and atmosphere at the Airport.Observations will also be made at various times at the Airport with focus on all of the terminal buildings. The investigators use qualitative and quantitative methods to reach a result. To achieve a result, the investigators will use theories and scientific facts and other available facts that will be helpful to reach a result that will be analyzed..

Nowadays, packaging design is seen as a competitive tool and its importance for corporations is becoming increasingly apparent. The rivalry within homogeneous markets puts high demands on differentiation and the ability to create something more than the product itself. With this fundamental question, the soft drink industry has been examined and a case study of the brand Coca-Cola has been performed. The aim is to investigate how packaging design is used as a tool for strengthening a brand and to explore which additional values this contributes. In addition, the study observes the most important factors in the development of packaging design.A theoretical work of reference, consisting primarily of theories related to branding, design development and visual identity, has been developed to support the study.

This paper presents the results of a workplace study of two smaller companies in the design industry. The core issue has been to investigate the companies use of technical tools and to what extent social praxis influence the daily work. The methods used are based on a qualitative analysis of interviews and observations. Various kind of work procedures, such as verbal and computerized, have been identified, but the most important occurrence was how spontaneous conversations between employees required certain flexibility, since the actors repeatedly were required to change focus and quickly perceive different information. For that reason, a thesis has been defined regarding how the use of spontaneous communication put an indirect need of a flexible working environment and also how this lead to more significant participation and exchange of information, as well as more awareness at the companies..

AbstractOne of the most common business models for agriculture is according to Lantbrukarnas Riksförbund (2010) that two or more agricultural companies merge and form a company together. To create strong owners and to be competitive there is a recognized need to create relationships between small firms according to Mazzarol , Mamouni Limnios and Reboud (2013). Oerleman and Assouline (2004) argues that it is possible to achieve success in agriculture by following certain strategic priorities.This paper examines why farmers choose to venture into collaboration and whether cooperation are linked to the strategies of the company. The paper also discusses the pros and cons of partnerships in agriculture. A qualitative comparative research design has been used to answer to the topics and we have interviewed respondents from four different agriculture companies, which have been active in some form of cooperation or collaboration.

This thesis project is based on a business idea where users can design their own t-shirt online. The project shows the first step in the development process where a prototype for a user interface is created and evaluated.The purpose of this thesis project is to answer the following question:How does one develop a user interface for t-shirt design with consideration to interaction design theories?In order to answer this question the design process began with scheduling the work at hand. The first step was to build a conceptual model based on specifications made prior to this project. This conceptual model became the foundation for the physical design.A high fidelity prototype was created using Macromedia Flash and Actionscript 2.0.

Uppsats för avläggande av högskoleexamen i Kulturvård, Trädgårdens hantverk och design 7,5 hp, 2014.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.