The number of data centers and their capacity is increasing throughout the world. Theenergy used in these data centers and the emissions from the use are increasing at thesame rate. The total use of energy will double from 2008 to 2011 based on the trends indata centers use. Research in this area says that the emissions from data centers willhave surpassed the level of airline traffic in 2020. The index used today to compare howefficient a data center is, called PUE, is lacking some information.

Business Intelligence may help organizations in making the right decisions byproviding data for analysis which can be presented to decision makers. DataWarehouse which is a central part of Business Intelligence can be built in severalways but the methods presented by Ralph Kimball and Bill Inmons are considered thetwo main methods. The solution provided by Inmon focuses on integrating the entirebusiness into one large database using relational database development. Kimballhowever proposes dimensional database modeling by creating one or more data martsand integrating these using a data bus. Previous research has shown that the quality ofa Data Warehouse can be measured through critical factors such as data quality andsystem quality.

Inkorporering av extern data i datalager är problematiskt och problematiken bekräftas av aktuella undersökningar inom området. Detta har medfört att det utvecklats olika former av stöd för att bemöta och analysera problemen som organisationer ställs inför.För organisationer är det i högsta grad viktigt att dess beslutsfattare är välinformerade och klarar av att selektera information från stora mängder data. Det är i dessa sammanhang som en datalagerlösning är en viktig hörnsten för att stödja analys och presentation av data som ursprungligen är lagrad i olika datakällor (både interna och externa). Genom att inkorporera extern data i datalagret uppnår datalagret en betydligt högre potential och således kan även organisationer och framförallt dess beslutsfattare utvinna stora fördelar.Strand (2005) har tagit fram riktlinjer för att stödja inkorporeringsprocessen av extern data i datalager. Dock saknas en utvärdering av riktlinjerna.

The relational database model was defined in the 1970?s and is the dominating database type today.  The main difference between data from a relational database and a hierarchical data structure is that the relational database stores records in tables. The records have no particular order, but can include links in terms of relationships with other records. A hierarchical structure organizes data in the form of a tree structure  and  can for an example be found in organizational structures in which different levels involves different responsibilities. If the data stored in a relational database is to be presented in a hierarchically, a conversion of the data structure is required. The intention of this paper is to describe how such a conversion can be performed.  To investigate the conversion methods, case studies has been conducted on the basis of a specific organization?s hierarchical structure.

The aim of this literature review is to give an overview of the differences between pure- and crossbreeding systems. Crossbreeding is a mating system with individuals of different lines or breeds. It is one of several breeding strategies in dairy production used to increase the economic profit. The use of crossbreeding increases due to changes in the dairy market and an increase of inbreeding among purebred Holstein. The main benefit of crossbreeding is heterosis, which is the improvement in genetic level in a hybrid offspring above the average of the parent breeds.

This study investigated whether in-situ audiometry, delivered via hearing aids, is a better option as a basis forprescribing hearing aid amplification, compared to conventional audiometry. By examining the real ear insertgain (REIG) in 29 ears (18 subjects), that had been fitted with a hearing aid programmed using both conventionalaudiometry and in-situ audiometry, the study looked at whether in-situ audiometry based prescription is closer tothe NAL NL1's fitting target than audiogram based prescription. The hearing aid Siemens Pure 7mi with speakerunit M was used on all participants. The results showed how in-situ audiometry based gain at certain frequenciesis more consistent with the target curve, especially at 1000, 1500, 2000 and 4000 Hz. It was not establishedwhether the findings of the study were statistically significant.

In this study it was investigated if the adoption of a new routine for quality control could improve the precision of the dimension measurement obtained by harvesters. Data was collected from three different harvesters. First, a reference data set was collected before the new procedures had been incorporated, and then when the new methodology was implemented another data set was collected by the harvester operators, allowing the two data set to be compered. The results indicated that following the implementation of the new procedures, the reliability and the precision of the measurements has increased. All harvesters included in the study had improved regarding most of the controlled factors such as standard deviation, systematic difference and hit rate within ± 2 cm for length and ± 4 mm for diameter..

In this paper, I have proposed a way of interpreting the philosophical subject of the Discours de la méthode that has remained relatively unexplored by contemporary commentators. By investigating the subjectivity that is expressed through Descartes? use of architectural metaphors, I laid bare some of the difficulties inherent in its discursive structure, as well as suggesting that the cogito in fact repeats and inscribes itself into this structure. In this context, the metaphor of the road (or travel) takes a supplementary role in relation to the architectural metaphor, marking the very conditions of existence of the architectonic subject. The subject, in order that it may establish itself as ?pure? and ?independent? thought, is dependent on a certain ?forgetfullness?; that is, only by forgetting its constitutive dependence on the diversity and historicity that is signified by the metaphor of travel, can it establish itself as its own source.

The focus of this project was to characterize the occurrence of ESBL-­?producing bacteria in two irrigation water ponds in Southern Sweden. Samples were taken from two ponds nearby each other, from which analyses were made based on levels of community and individual isolates. Community samples were used for attempts for characterization of resistance patterns in irrigation water using the Omnilog PM-­?plate system. The growth of community microbiota in the presence of the following antibiotic substances was assessed; amikacin, gentamicin, kanamycin, penicillin G, ampicillin, piperacillin, trimethoprim, potassium tellurite and ciprofloxacin. Isolates were pure cultured using semi-­?selective media: LB, Rainbow Agar, mEnterococcus, 0.1 TSA and VRBD. A total of 177 isolates were isolated randomly. Each isolate was identified using the Omnilog GENIII-­?system of biochemical characterization. Further, the isolates were tested on Brilliance ESBL-­?agar for their ability to grow. Out of the total number of isolates, 30 were selected, preferably Enterobacteriaceae or Pseudomonas spp., based on their high similarity to library strain during the identification in the Omnilog-­?system. These were further characterized using Etest-­?sticks. Three selected strains were picked for further analyses using exogenous isolation for attempts to simulate horizontal gene transfer, and Omnilog PM-­?panels containing various antibiotics of interest. Selections of samples were chosen for molecular tests targeting plasmid-­?borne resistance genes CTX-­?M1, CTX-­?M2 and SHV. The method for assessing community-­?resistance patterns showed ambiguous data that was difficult to interpret; further optimization is recommended. For all tested PM-­?plates, generally greatest differences between substances were found among wells with the strongest concentration of antibiotic substance. A total of 175 isolates displayed ability to grow on ESBL-­?agar. Etests confirmed ability of isolates to resist many ?-­?lactam antibiotics and many were clinically resistant to certain substances. No plasmids were transferred during exogenous isolation. During molecular tests, a few matches were found for the CTX-­?M1 gene. Isolates analyzed with Omnilog PM-­?plates showed resistance to most compounds tested. The isolates showed greatest resistance toward penicillin G, ampicillin, amikacin, kanamycin and trimethoprim. In the study, it was established that resistance among bacteria was frequently occurring in the irrigation water, and ?-­?lactamase producing bacteria was very common. Extended studies are needed to assess the frequency-­? and occurrence of horizontal gene transfer (HGF) in this environment. Although some potential corresponding data is found, it is at this point not possible to determine whether the resistances are due to antibiotics used in veterinary medicine, human medicine or one additional reason is travel and trade. in irrigation water using the Omnilog PM-­?plate system. The growth of community microbiota in the presence of the following antibiotic substances was assessed; amikacin, gentamicin, kanamycin, penicillin G, ampicillin, piperacillin, trimethoprim, potassium tellurite and ciprofloxacin. Isolates were pure cultured using semi-­?selective media: LB, Rainbow Agar, mEnterococcus, 0.1 TSA and VRBD. A total of 177 isolates were isolated randomly. Each isolate was identified using the Omnilog GENIII-­?system of biochemical characterization. Further, the isolates were tested on Brilliance ESBL-­?agar for their ability to grow. Out of the total number of isolates, 30 were selected, preferably Enterobacteriaceae or Pseudomonas spp., based on their high similarity to library strain during the identification in the Omnilog-­?system. These were further characterized using Etest-­?sticks. Three selected strains were picked for further analyses using exogenous isolation for attempts to simulate horizontal gene transfer, and Omnilog PM-­?panels containing various antibiotics of interest. Selections of samples were chosen for molecular tests targeting plasmid-­?borne resistance genes CTX-­?M1, CTX-­?M2 and SHV. The method for assessing community-­?resistance patterns showed ambiguous data that was difficult to interpret; further optimization is recommended. For all tested PM-­?plates, generally greatest differences between substances were found among wells with the strongest concentration of antibiotic substance. A total of 175 isolates displayed ability to grow on ESBL-­?agar. Etests confirmed ability of isolates to resist many ?-­?lactam antibiotics and many were clinically resistant to certain substances. No plasmids were transferred during exogenous isolation. During molecular tests, a few matches were found for the CTX-­?M1 gene. Isolates analyzed with Omnilog PM-­?plates showed resistance to most compounds tested. The isolates showed greatest resistance toward penicillin G, ampicillin, amikacin, kanamycin and trimethoprim. In the study, it was established that resistance among bacteria was frequently occurring in the irrigation water, and ?-­?lactamase producing bacteria was very common. Extended studies are needed to assess the frequency-­? and occurrence of horizontal gene transfer (HGF) in this environment. Although some potential corresponding data is found, it is at this point not possible to determine whether the resistances are due to antibiotics used in veterinary medicine, human medicine or one additional reason is travel and trade..

This Master of Science thesis project handles issues around managing data from the digital tachographsystem. European legislation states that companies must download the data of the digital tachograph systemand store it for at least one year for control purposes. The system stores data on the vehicle unit located inthe driving compartment and on smart cards personal for each driver.Acquiring data from the previous analogue tachograph was done instantaneously since the data wasphysically printed to a circular paper chart when driving. To acquire data from the digital system one mustperform a download from the vehicle unit and later transfer it to some form of backup solution for longterm storage. Data must also be downloaded from the driver smart cards.Download of data from the vehicle unit is the most time consuming task and may take up to 30minutes pervehicle.

Legionella can be prevented, the question is how. This report is a degree in construction engineering education at Chalmers University in Gothenburg. A comprehensive written publication for Legionella-safe plumbing installations is not available and therefore requested. The purpose of this report is to present preventative measures against Legionella bacteria growth in tap water and in other systems where Legionella bacteria are a potential problem. Technical solutions are presented including how different systems function and what their advantages and disadvantages are.

Customer Relationship Management (CRM) är ett ofta använt konceptför verksamheter att hantera sina kundkontakter. En viktig del av CRMär användningen av tekniska lösningar för att lagra och analysera informationom kunder, till exempel genom data mining för att upptäckamönster hos kunders beteende. Idag produceras allt större mängderdata genom människors användning av informations- och kommunikationsteknik.Traditionell teknik klarar ej av att hantera den variation ochmängd data som existerar, vilket lett till utvecklingen av nya tekniskalösningar för dessa uppgifter. Begreppet Big data brukar användas föratt beskriva stora datamängder. Syftet med denna studie har varit att geökad förståelse för hur Big data kan användas inom CRM.

The transportation sector is the only sector of the Swedish society that is still increasing the emissions of carbon dioxide and other green house gases. Diesel fuel represents one of the fuels that contributes to these emissions and the use of diesel fuels is increasing every year. The main purpose of this study was to make an estimation of the current business situation for producers of liquid diesel biofuels in Sweden such as biodiesel, synthetic diesel and crude tall diesel and examine the forces of competition of the industry today and its future prospects. The study revealed that the rivalry among the existing firms was low mainly due to the geographical spread of the companies. Moreover the success of the biodiesel industry was influenced by a long-term guarantee of the tax exempt for biofuels and by the price level of petroleum diesel.

The phenomenon of social gaming is essentially an IT-service that people worldwideuses on a daily basis. This particular market is also young and generates tremendousamounts of data, which, from a data managing perspective, makes it naturallyinteresting. Throughout this thesis the social gaming market is described from the datamanaging and different actors perspectives. This is done by using literature reviewing,interviews with companies and analysis based on that information. The thesis initiallypresents important and central terms as well as different techniques.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.