The building industry are currently going through a huge alteration. The introduction of BIM (Building Information Modeling). Which also implements a lot of new ways of solving problems that building modeling can cause. This report is written for Uppsala University in cooperation with Temagruppen in Uppsala. However, it contains a comparison between two different systems that checks building models.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Organisations tend to focus more and more on product and process development to increase their competitiveness. Several major organisations, among them ABB, have developed models aimed to more effectively control and manage product development processes. ABB is using its standardised model ABB Gate Model for this. The purpose of this thesis is to analyze how the introduction of ABB Gate Model has affected the outcome of decisions and also the decision-making in the product development process. The study is limited to elucidate the version of ABB Gate Model handling product development projects.

The purpose of this paper is to analyze the ongoing changes in German family policy. It explores the issue of whether the German welfare state, in this policy field, can still be regarded as a conservative welfare model or rather approaches a more liberal or social democratic model. A qualitative method is used to analyze the material, especially from the German government, including press releases, other public documents and also articles from the political weekly magazines Der Spiegel and Die Zeit. The changes analyzed are the new parental benefit, the expansion of child care, the concept of whole-day schools and the system of joint taxation. The point of departure is Gösta Esping-Andersen?s categorization of three types of welfare states: the social democratic, the conservative and the liberal.

AbstractIt is important to choose which spare parts to keep in stock. With the right spareparts in stock the costs for inventory and production loss will decrease. Cavalieri et al. (2008) highlights that the balance between inventory cost and production loss is underestimated.  It affects the company and must be considered before decision on purchase.The problem with spare engines is that they are all more or less critical for the production. That can be a reason for why no previous research targeting engines and classification of with engine should be kept in stock has been found.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This thesis has been carried out in autumn 2009 at Uppsala University for Boliden Mineral AB. Physical modelling has been used to model a comminution circuit. The model has then been linked to a PLC.When a concentrator is about to become operational Boliden Mineral AB have been looking for a way to test the PLC. The purpose of this report has therefore been to develop models for the subprocess in a concentrator and link these models to the PLC. The subprocess was a comminution circuit in Aitik36.

Large volumes of excavated soil and rock are generated in building- and construction projects. These materials need to be transported longer and longer distances due to the densifications of cities. The transportation affects the environment in terms of noise and emissions, but also makes high demands on road infrastructure. To reduce the transport distances an increased responsibility for the excavated rock generated needs to be taken. Responsibility can be increased through an introduction of means of control.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

A protection helmet for young people (3-7 years) in winter environment has been developed in this thesis. The result is a concept proposal for development at STIGA Sports AB in Eskilstuna. This thesis work has been performed during 20 weeks, for a Master of Science in Product and Process development at Mälardalen University Eskilstuna Sweden in September 2009 to January 2010. The helmet is shown as a CAD model with detailed solutions to the outer shell, interior and adjustability (in sizes 50-56 cm) which are the three focused areas in the development. Also a physical model in scale 1:1 has been developed and is shown in this thesis work.To achieve the best result possible the process started with an analysis of the market and the product.

This thesis has been conducted at Saab Bofors Dynamics AB. The purpose was to investigate if a non-linear missile model could be stabilized when the optimal control signal is computed considering constraints on the control input. This is particularly interesting because the missile is controlled with rudders that have physical bounds. This strategy is called Model Predictive Control. Simulations are conducted to compare this strategy with others; firstly simulations with step responses and secondly simulations when the missile is supposed to hit a moving target.