Skin temperature is detected through signals in unmyelinated C-fibers and thin myelinated A?-fibers in the peripheral and central nervous system. Disorders in thin nerve fibres are important and not rare but difficult to diagnose by the most common neurophysiological methods. In this pilot study different methods for quantitative sensory testing, QST, were compared to give some ideas about which method could be the most efficient to use in order to point out injuries of the sensory system in clinical practice. The comparison was made between Békésy (separate warmand cold thresholds) and Marstock test (combined warm and cold thresholds).

Background Calprotectin is a protein expressed in the cytoplasm inside the neutrophile granulocytes. During inflammatory bowel disease (IBD), the neutrophile granulocytes are involved in a complex interaction at the inflammatory area where they die and release their content into the intestinal lumen. Therefore, calprotectin in stool is a suitable marker for diagnosis and measurement of the disease-activity in patients with IBD. The most commonly used method to detect calprotectin in stool is ELISA, but the process of manual preparation of stool samples is time-consuming.Aim The objective of the study was to evaluate an extraction method that could replace manual preparation of fecal samples and to compare different methods for measuring Calprotectin in stool using two ELISA-methods from two manufacturers and one rapidtest.Methods For extraction of calprotectin from stool samples we used sample collector tubes from Epitope Diagnostics and fecal preparation kits from Roche. Two different ELISA-kits for measuring calprotectin concentration in stool were compared.

Introduction: Dolomite AB was in need of a dummy arm for crutch testing, to complement their existing test capabilities. Background: A large number of people need crutches on a daily basis. For them it is essential that their crutches do not fail. ISO (the International Organization for Standardization) conducts ongoing work to guarantee the durability and function of e.g. crutches.

My aim in this case study has been to create a method for creature design to test this method in a production and evaluate the results. To achieve this I studied and analyzed the methods of three concept artists and illustrators named James Gurney, Neville Page and Iain McCaig. From the analysis of these artist´s methods, combined with my own personal experience, a new method was formed. To test this method a creature was designed based on directives given by a game design group in the process of creating a table top role playing game in a fictitious world. These directives where given for the creature´s role and its living conditions.

Incompatibility between donors and recipients can cause fatal hemolytic transfusion reactions (HTR), kidney damage and death and immunization of the recipient. Antigens on the surface of erythrocytes in the ABO blood group system and regular natural antibodies against these in the patient?s plasma must be considered. An individual always has a corresponding antibody of IgM in their plasma. Irregular antibodies acquired by transfusion or pregnancy and active in body temperature also cause the HTR incompatibility.

My aim in this case study has been to create a method for creature design to test this method in a production and evaluate the results. To achieve this I studied and analyzed the methods of three concept artists and illustrators named James Gurney, Neville Page and Iain McCaig. From the analysis of these artist´s methods, combined with my own personal experience, a new method was formed. To test this method a creature was designed based on directives given by a game design group in the process of creating a table top role playing game in a fictitious world. These directives where given for the creature´s role and its living conditions.

This report reflects an examination work performed for Getrag All Wheel Drive AB during the spring of 2005. Among the companies range of products there exists some concern regarding the amount of clamping force and friction on bolted joints caused by the assembly torque.The aim of this project has been to determine if there is a simple way in which to identify and then practically apply testing methods for clamping force and friction through utilization of existing testing equipment.Three separate methods of clamping force and friction determination have been tested in rear drive unit, RDU, at a 30 Nm assembly torque. A fourth and final method, screw elongation with ultrasound, has been used as reference. The methods are:?Torque-Tension test.?Screw elongation with micrometer.?Joint stiffness test.?Screw elongation with ultra sound for reference.The results from tests can be viewed in table below.MethodTorque-TensionMicrometerCs=318 kN/mm Assembled with torque wrenchMicrometerCs=318 kN/mm Assembled on lineUltra-soundCS=311 kN/mm Ultra- soundCS=318 kN/mm Joint stiffnessTheoreticalClamping force-21,8 kN17,6 kN17,3 kN17,6 kN17,1 kN17,3 kNFriction-0,110,1470,1530,1470,1520,149.

To assure good quality the software needs to be tested to find errors and to verify that the programme meets the customer?s expectations. Traditional methods are usually used in software development and means that a number of predetermined steps are followed. By using agile methods the development can more easily be adapted to the changes on the market. With these methods the testing is carried out continuously throughout the project.

The occurrence of small amounts of albumin in urine, microalbuminuria (MA), is used both in human- and veterinary medicine as an indicator for patients who have developing proteinuria. Proteinuria can be prerenal, renal or postrenal which is important to establish during an investigation. With conventional methods decreased renal function is not detected until 70 % of renal function is lost. The ability to detect and start a treatment earlier might reverse or slow the progression of disease. The purpose of this study was to investigate the reliability of Heska® E.R.D.-Health Screen?, a test for microalbuminuria in dogs, to detect albuminuria.

Test is an area in system development. Test can be performed manually or automated. Test activities can be supported by Word documents and Excel sheets for documenting and executing test cases and as well for follow up, but there are also new test tools designed to support and facilitate the testing process and the activities of the test. This study has described manual test and identified strengths and weaknesses of manual testing with a testing tool called Microsoft Test Manager (MTM) and of manual testing using test cases and test log templates developed by the testers at Sogeti. The result that emerged from the problem and strength analysis and the analysis of literature studies and firsthand experiences (in terms of creating, documenting and executing test cases) addresses the issue of the following weaknesses and strengths.

The aim with this thesis is to investigate two different methods used to test usability on web-sites to determine the advantages and disadvantages of two methods and compare the results. The two selected methods are the think aloud method and asynchronous remote method. Re-mote usability testing has existed for more than ten years but the possibilities with this meth-od needs to be explored more.To achieve the purpose of this thesis a case study was conducted on an e-commerce site and for the online remote usability testing software was used.The results of this study show that think aloud usability testing encounter more issues with the website than the remote usability testing..

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

This paper investigates the usability of the intelligence test Wechsler Nonverbal Scale of Ability (WNV). Twenty four children in two different age-groups were tested with WNV, 10 children between ages 5 - 6, and 14 children between ages 9 - 10. The WNV turned out to be a useful test when some verbal communication was used in the test situation. This was especially apparent among the younger children, who needed extra verbal instructions and verbal support through the different subtests. The test also contained standardized verbal instructions for all ages.

AimThe aim of the present study was to evaluate physical performance according to ?fysprofilen? in skiers of the Swedish mogul ski team and to compare their physical performance at three test occasions during one year.MethodsAll eight elite mogul skiers at the Swedish national mogul ski team during the seasons 2011/2012 and 2012/2013 participated voluntarily in this study. The test battery ?fysprofilen? was performed at three test occasions, October 2011, May 2012 and October 2012. Muscle strength was evaluated with squats, bench press and grip strength; power was evaluated with power clean, squat jump, countermovement jump with and without arm swing, Harre´s test and the 30 meters sprint.

The aim of this meta-study is to present an overview of the methods used in Master theses written at The Swedish School of Library and Information Science at the University of Borås, where all Master theses from 1999, 2004, and 2009 has been studied. The aim includes examining if there is a connection between college (Swedish term: kollegium) belonging and methods used but also to examine and compare the qualitative and/or quantitative approaches to the methods. In the 252 Master theses studied, 353 different choices of method are recognized. After taking note of the methods, six categories are created in which the methods are placed. The categories are: Interview, IR-test, Observation, Studies of Text, Survey, and Other.