Sök:

Sökresultat:

1246 Uppsatser om Protection equipment - Sida 19 av 84

Mjukvaruplattform för riggstyrning

Today the competition in the automobile industry is getting all tougher. The technology behind cars becomes more advanced. To get ahead of competitors car companies has to look into new areas of innovation.One important area is vehicle safety. Bigger companies have come so far in vehicle safety that difference between cars more depends on the car type (size) than the technology behind it.There is one area where vehicle safety that still has great opportunities for improvement, which is in active safety. The term active safety states that the car has the ability to identify treats and automatically respond to the treats.

Sjuksköterskors upplevelser av noninvasiv ventilatorbehandling av patienter med akut andningssvikt på lungavdelning.

    AbstractThe aim of the study was to describe factors of nurse?s experiences when they give NIV treatment to patients with acute respiratory failure in a lung department. Semi structured interview questions about how nurses experience to give NIV treatment on a ordinary lung department was done on 10 nurses, who work in a lung department were NIV treatment is given. Data were analyzed with content analysis. In the result there was shown two themes.

Brandskyddsindex Visby innerstad

The aim for the project was to develop a risk analyse tool for measuring the fire safety level in Cultural Heritage buildings of Visby, Gotland. In 1995 Visby were taken into the Unesco:s World Heritage List with the explanation ?Visby is an outstanding example of a Northern European walled Hanseatic town which has in a unique way preserved its townscape and its extremely valuable buildings? One of the demands for the tool was that it should be easy to use and result into a ranking level in examined buildings. The user of the tool is recommended to be personnel in the fire department. To develop the tool a Multi Attribute Decision Making (MADM) method was used.

Försäkringsplikt i kommersiella entreprenadavtal

Construction projects are generally designed as a general contract or a complete contract. In a general contract the commercial contract that is being used is AB 04 and related advice and instructions, AMA AF 07. In AB 04 there is an insurance requirement that stipulates that the contractor shall take all risks and liability insurance for the contract where the client must be co-insured.Construction law is almost exclusively regulated by the various standard contracts, one of those is AB 04. The Construction Contracts Committe is an organization that has published the standard contracts in this area of law and also the advice and instructions to help the parties to understand the agreements. The insurance requirement occurs in an area of law that is complex and the meaning of the concept is not entirely clear, nor which of the parties? interests and responsibilities that are covered by the types of insurances that are provided by the insurance requirement.

Frekvensomriktare i hydraulhissdrift

Hydroware Elevation Technology AB sells control and regulation equipment for hydraulic elevators. The company now wants to investigate the possibility of changing their present softstarters to frequency inverters to supply power to their pump engines. They also want to investigate the possibility of future use in so called ?intelligent? houses.The purpose of this report is to investigate these possibilities..

Lönsamhetsbedömning av utökad MR-kapacitet på Karolinska Universitetssjukhuset

This thesis analyses how a radiology department at the largest hospital in Sweden, Karolinska University Hospital, most profitably could expand its capacity for investigating cancer patients using magnetic resonance imaging (MRI). The queues today for patients waiting to be scanned are long, which delays the start of cancer treatments. Meanwhile the hospital has a budget deficit of half a billion SEK, which make any expansion hard. In this thesis we evaluate the alternatives of investing in new machinery; utilize the current machinery better by using them more days annually or through a shift work system. Finally we evaluate a combination of these.

Analys av massapumps- och mixerarbete vid Metsä Board Sverige AB, Husums Fabriker : Energibesparingsåtgärder vid blekeri 4 & 5 med jämförelse mot ny utrustning

Husums plant has a selection of different pulp pumps at bleaching plant 4 and 5. The displacement- (HC-pump, Sund Defibrator PTD-60) and centrifugalpumps (MC-pump, MCA 42-200, MCP 30/20) are of interest in this report. The centrifugal pumps are controlled by throttle valves, which result in an energy loss. Chemical mixers are used to mix ClO2 into the pulp before proceeding into a holding tower where the bleaching process occurs.The energy demand of the different positions has been measured or calculated to be used in comparisons against new equipment. Quotations were requested and delivered from Valmet and Sulzer.

Teknisk utredning av skärutrustning till skördare : En analys av den svenska marknaden

Husqvarna is a world leading producer of chainsaws with a well-established brand name. Husqvarna now has an interest in investigating the possibiltiy to expand their production of chains and guide bars to include cutting equipment for timber-harvesters.This project is a technical study which aims to answer questions about cutting equipment for timber-harvesters that have been decided in cooperation with Husqvarna. The questions have mainly been focused on forces, cutting speeds, service and maintenance -as well as general questions regarding the size of the Swedish market.Two methods have been applied to answer the questions. Interviews with retailers of harvesters, producers of harvester heads and harvester drivers.The main findings in this project show that there is a relatively small selection of harvester chains on the Swedish market. In contrast to the selection of harvester chains the selection of guide bars is quite large.

Uljabuouda vindkraftpark turbinmodellering och stabilitetsanalys

This master thesis has been performed at Solvina in Gothenburg for Skellefteå Kraftand Vattenfall Eldistribution. The aim of it is to investigate the consequences of theinstallation of a wind power plant on the mountain Uljabuouda in the vicinity ofArjeplog. Especially the impacts on voltage and transient stability are examined.Furthermore, the amount of extra strain on the voltage regulation equipment and theneeds for increased regulation capabilities are looked into.The wind power plant is planned to be built by Skellefteå Kraft and connected to a130 kV grid owned by Vattenfall Eldistribution. The work comprehends the followingmain parts:- Theoretical studies aimed at wind turbines and power system stability issues.- Modelling of the type of wind turbines assumed to be built on Uljabuouda.- Simulations of different operation cases and analysis of the simulation results.The results from the simulations show that, as far as voltage stability and extraworkload on tap-changers are concerned, the wind power plant does not, in anysignificant manner, worsen the present conditions. The problem of overloading theline between Arvidsjaur and Vargfors is also minor.

Meningen med aktiekapitalet : ? Är aktiekapitalet en gammal förlegad tradition som har bevarats?

Introduction: There was a reduction in Sweden of the share capital in 2010, in which the share capital was reduced from 100 000 SEK to 50 000 SEK. The reason behind the reduction of the share capital was to enable more people to start limited liability companies in Sweden. Meanwhile in Europe, they questioned the function of the share capital, and as a result of this discussion a number of European countries have abolished the requirement for the share capital in limited liability companies.Purpose: The purpose of this study is to investigate what meaning the share capital has to entrepreneurs based on their own businesses, and to see what function the share capital have for the creditors.Problem: What are the meaning of the share capital for today´s entrepreneurs and its creditors?Methodology: The study is based on a qualitative research method in which a cross-sectional study was done with four small limited liability companies and four creditors.Conclusions: The share capital functions and meaning has lost its intended meaning as creditor protection and the help to facilitate the raising of capital. The share capitals intention has to some extent been eroded.

Arbetsliv och föräldraskap : Missgynnande på grund av föräldraledighet

The main purpose of this essay is to study the Swedish labor law concerning employees who are, aspire to be, or are expected to become parents, both men and women. Thereby accomplishing a gender perspective on the issue at hand. The study also take in to account the laws issued by the European Union, and their impact on the Swedish law system, so as to gain an international perspective. The laws regarding parental leave, both Swedish and European, involve protection for workers from being treated in a less favorable way than someone in a comparable situation, as employers are forbidden to disfavor any employee or job-seeker in basically all situations in the work place or in a recruiting context, if the disfavor is in any way related to the parental leave. The only situation where an employer is allowed to disfavor an employee regarding his or her parental leave, is if the disfavoring is a necessary consequent of the employee?s absence.

Sociala medier i offentlig sektor : En rättsdogmatisk uppsats om problematiken kring hur yttrandefriheten inskränker lojalitetsplikten inom den offentliga sektorn i samband med sociala medier.

Social media has recently expanded dramatically, as more people are using different media such as blogs, Facebook and Twitter, to express their opinions. This increases the possibilities to spread information and an unclear legal regulation in this area can create adverse consequences. Freedom of expression is a constitutional right, which forms an important cornerstone of a democratic society. Public employees? freedom of communication means that they can submit information to the media, without fear of reprisals from the authorities.

Konstruktion och programmering av lerduvekastare

This degree thesis is based on an assignment from BEOMAT in Storfors. BEOMAT is a company that constructs and sellsclay pigeons to both the national and international market.Our main purpose with this paper is to find a solution/system that can replace the expensive and space demandingOlympic trap facility. Our solution will replace fifteen clay pigeon throwers with one automatic thrower whosimulate all throwers together. The system will be provided with an appropriate control system for mass productiontherefore this system needs to be user-friendly so no previous knowledge is required.Totally 405 different throw coordinates will be stored in the programme in nine different subprograms. According tothe Olympic-rules the throwers should coincidence within certain specified conditions, this will be solved with anrandomizer in the programme.

Maktdelning : och konstitutionellt rättighetsskydd

The topic of this master thesis in legal science is state law and constitutional law, or more specific judicalization, with the division of power and thus increased individual legal rights in various forms. Sweden has traditionally had a weak constitutional protection for the individual?s legal rights. The public power has been concentrated to the government and the courts have only played a marginal role. Since the implementation of the European convention of legal rights and with the ever-increasing importance of the legal system of the European Union, the Swedish legal system gone through changes of historical dimensions.This master thesis is based on the legal dogmatic method where laws, preparatory work, case law and doctrines have been systemized.

Underhållsstrategi enligt Professional Maintenance metodiken som en del av World Class Manufacturing

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.

<- Föregående sida 19 Nästa sida ->