sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.

The increasing complexity in the development of a configurable real-time system has emerged new principles of software techniques, such as aspect-oriented software development and component-based software development. These techniques allow encapsulation of the system's crosscutting concerns and increase the modularity of the software. The properties of a component that influences the systems performance or semantics are specified separately in entities called aspects, while basic functionality of the property still remains in the component. When building a real-time system, different sets of configurations of aspects and components can be combined, resulting in different configurations of the system. The temporal behavior of the system changes and a way to ensure the predictability of the system is needed.

In December 2008 the municipal council in Nybro, decided that the municipality shouldreduce the budget for food service. The budget should be reduced by 2 100 000 SEK.They decided that the children- and education committee, and the care committee would haveto lower their budget with 1 264 000 SEK respectively 636 000 SEK. The change have to bedone under two years, 60 % should be done under 2009 and 40 % under 2010.As a result of the decision, many kitchens have to become kitchens that only serve food, notcook it. This will result in preschool staff and nursing staff take over some of the tasks fromthe kitchen staff. The municipal council also decided that entrepreneurs could take over one(later two) cooking areas.A kitchen that serves food means that there isn?t any cooking involved.

Bakgrund: Tiden har blivit en av de viktigaste resurserna i världen. Tidspressen har ökat och drabbar alltfler arbetare och ledare med ohälsa i arbetslivet. Risken är stor att organisationer missar en del av sitt lärande och sinprestanda då det blivit allt svårare att hantera tidsproblematiken.Syfte: Attundersöka vad som begränsar tid, men också vad som frigör den hos chefer ochinom organisationer samt hur dessa aktivt arbetar med tidsproblematiken och dess upplevelser.Design/metod/tillvägagångssätt: Uppsatsen inspireras av socialkonstruktivism och grundad teori. Det ingår i chefernasarbete att hantera flera tidsdimensioner samt gränser. På så sätt har de benägenhet att utveckla nya strategier för att både kunna hantera och optimera tid.Resultat: Påfrestningen av att alltid vara tillgänglig, hantera en stor mängd information samt svårigheten att prioritera informationen beskrivs som tidskrävande.

Denna uppsats syftar till att undersöka utbildning och forskning inom fysik- och teknikämnenavid Uppsala universitet mellan åren 1955 och 1975. Här studeras dels växelverkan mellan tvåolika verksamheter; utbildning och forskning, och dels den lokala utvecklingen av, ochgränsdragningsarbetet mellan, två vetenskapliga discipliner; fysik och teknik. Förändringarnatolkas som resultat av interaktion mellan forskning och utbildning å ena sidan, och utbildning ochandra samhälleliga arenor å andra. Uppsatsen diskuterar Thomas Gieryns teori om att epistemiskauktoritet hos en vetenskap uppkommer nedströms, i en samhällelig arena utanför forskningendär den uppkom. I uppsatsen drivs tesen att lärogång inte enbart kan räknas som nedströms irelation till forskning utan som uppströms, nedströms och mer därtill.

The objective of this work was to introduce measures to reduce energy and water demand at Gävle Söder 17:10. To succeed, this energy audit has been made. The work is based on collected statistics from the property owner Norrporten, measurements, literature review and through consultation with experts in the field. Two models, one for each building, have been created in the simulation program BV2 to estimate the potential of energy measures based on the collected information. The models in BV2 have been verified against the statistics of the energy consumption.With the help of calculations and simulations, seven cost-effective measures have been identified.

Quality is a vague concept, it seems to be about a ?gut feeling? but is used as if it were a concrete property. This paper examines the defenition of the concept of quality, the relation between quality and gender equality and also what the representation between the genders in exhibitions, purchases and donations looks like in this day. As method for this paper text analysis, with searchlight on the two parameters of quality and equality, have been used on documents that provide a historical and a cultural policy perspective. The main part of the paper is an analysis of the visual arts on Värmlands museum, Kristinehamns konstmuseum and Rackstadmuseet.In the discussion of the paper, chapter 5, the result of the research is presented.

To create a more accessible environment for disabled people, the Swedish government, in the year of 2001, made the national act of easily eliminated obstacles valid. This national act states that all easily eliminated obstacles in the municipalities, in places and in premises that are public, shall be removed before the end of 2010, no matter if the owner of the place or premise is private or public. According to Boverket, most of the municipalities are not going to be able to reach that goal, why? The aim of this thesis is to compare the two municipalities Kalmar and Karlskrona in their way of implementing this national act, to see where it went wrong and why. By using implementation theories and qualitative empirical data in the form of interwievs with the total of eight people from different administrations in both of the municipalities, the subject was analyzed and discussed.

Energy supply in Sweden year 2011 amounted to 577 TWh. The final energy consumption for industrial, residential and service was 379 TWh. Sweden has energy policy goals to reduce energy use in buildings. One of these goals is to reduce the energy use by 20 % in 2020 compared to the year 1995. An important step to achieve this goal is to target energy efficiency measures in existing buildings.

This report is focusing upon relining from a client?s point of view. Potential buyers are given a presentation of the different methods available today together with a general briefing describing the process. An important part of this report are the interviews that took place with already established customers. Property owners, managers, pipe cleaners, and project managers whom all been in contact with relining have answered the questions given along with their own thoughts and have also given recommendations of other persons to talk to.

The landscape with its associated historical tracks and remains are an important part of our cultural heritage that we consider important to conserve. The stone walls are an example of historical remains that helps to build up this cultural heritage. It is a landscape element that today usually is being associated with the old cultivated landscape, where they mainly functioned as boundary markings and fences. Today, the stone wall is a valuable element in the landscape with ecological, culture-historical and aesthetic values. Since the stone walls arose as elements in the landscape a lot has been changed within the agriculture.

In a globalized world, competitiveness is based on the high IP (intellectual property) of our export products and innovations are therefore important for new companies to establish and develop. It´s not enough to just have big international companies but it is also necessary to invest in new companies that can be competitive in the future. By helping entrepreneurs with innovation support in the early stages, new technology-based businesses are established and developed. The purpose of this paper was to examine how innovation support in the early stages affects the establishment and development of new technology-based companies. Furthermore, we investigated how this will affect Sweden's international competitiveness.

This thesis has been performed at Scania CV AB Technical Centre in Södertälje and its aim hasbeen to study the causes and effects of deformations in the interface between the rear axlehousing ADA1100 and the central gear house R780 during operation. Design changes that wouldincrease the sealing capability of the studied interface are also suggested. Finite element (FE)and CAD software have been the primary tools in this study.Finite element (FE) simulations are used in the industry to predict and develop engineeringdesigns. The main motive for FE simulations has traditionally been to identify weak spots in thedesign, regarding high tensions and large deformations.The FE model is an aggregation of submodels and interface models that represents the rear axlehousing, suspension, central gear, central gear housing, wheels, bolts and weldings, and theirinteractions. The submodels have different material properties and they are connected withcontact interface models.Boundary conditions are defined on the bushings in front of the rear axle and on the air bellowsbehind the rear axle.

The purpose of this paper is to contribute to better understanding of the importance of social support for physically active individuals' experiences of training residence following an injury.The physical activity's impact on public health is well known. Increased physical activity also increases the risk of suffering an injury related to physical activity. The importance of social support for those individuals who suffer an injury related to physical activity is where increased knowledge is needed.Four interviews to were conducted using a thematic interview guide with the following themes: The experience of the training break, two sides of social support, several ways of dealing with the experience, the design of the support, Varied support providers relationship changes. The most important property of the individual who gave support was an experience similar to that of the injured individuals underwent. That, combined with the close relationship with the individual who gave support was seen as crucial to the experience of the social support role for the injured individual.The Conclusion was that social support is important for the experience of a break from exercise due to an injury related to physical activity..

The basic ingredient of paper is the individual wood fibers. The property of the fibers depends on a variety of factors e.g., method of pulp production and processing. The final sheet quality depends in part on how the fibers interface between each other and therefore factors that affect the fiber size are of interest.The flexibility of the fibers depends in part on the pore water i.e., the fiber swelling. The sheet becomes less flexible at low water content which gives a loss in strength. Thus it becomes desirable to increase the water uptake.The experimental investigation described in this report consists of exposing the wood fibers to different ions and ionic strength and then measure the pore size by thermoporosimetry where a DSC (Differential Scanning Calorimeter) is used.