This project was a request of Norrbodal´s Forestry Board, Västra Götaland. It was performed as a qualitative interview analysis of private forest owner?s deficient motivation regarding pre-commercial thinning. The purpose of the project is to investigate what the Forestry Board can do to motivate private forest owners to do more pre-commercial thinning. The results build upon 16 qualitative phone interviews with forest owners that have their forest within the district of Norrbodal. The owners are divided into two groups, the one who have performed the pre-commercial thinning and the one that has possible pre-commercial thinning needs on their Properties according to the pre-commercial thinning analysis ,which is the result of a satellite analysis.

The application of the LSS law and how the public organization (Municipality of Hudiksvall) later had to reform their organization to fit the new demands is the foundation to this master's thesis. An internal evaluation was performed due to this reorganisation process within the social care department (LSS unit). The aim was to investigate and evaluate if the reorganization resulted in a better working environment and if the work load (distribution of work) became more evenly divided between the different unit managing directors. The primary empirical information to this master's thesis is collected from that evaluation report. The main aim of this master?s thesis is to answer if the organisational choice between specialised or de-specialised working tasks has an effect (experienced and measured) on the level of stress among the unit managing directors.

Mitt syfte med projektet är att vitalisera stadsdelen Husby i nordvästra Stockholm. Bryta upp zonerade områden och addera fler och varierade funktioner som definierar nya stråk, länka samman omtyckta områden och överbrygga platser som upplevs otrygga. Sammantaget ger det förutsättningar för ett mer levande stadsliv som attraherar fler att vilja bo, bo kvar och göra bostadskarriär i Husby.Centrala begrepp i projektet är mångfald, trygghet, flexibilitet och hållbarhet. Jag har arbetat med att identifiera, bevara och utveckla kvaliteter i kombination med att öppna upp befintlig bebyggelse som präglas av upprepning, slutenhet och rationella byggmetoder samt addera ny bebyggelse för att få en större mångfald och ett mer flexibelt utbud av både lokaler, bokaler och bostäder men även genom att analysera och bearbeta områdets struktur. Fokus har legat på de trafikseparerade miljöerna och hur de kan vidareutvecklas genom att bland annat addera gångvägar och skapa nya stråk längst tillfartsgatorna och samtidigt bevara kvaliteter som de nivåseparerade korsningarna mellan gångvägarna och bilvägarna erbjuder med säker skolväg och en trygg bilfri miljö för barnen..

Road design with focus to safety has been extensively developed in last decades in Nordic and some other EU countries with the main aim to achieve a decrease in a number of accidents and fatalities on the roads. These countries gained many valuable experiences, but they had to sacrifice great effort, expenses, and time to reach the present art-of-state. The purpose of the Master?s Thesis is to review some design approaches with focus to safety and discuss the general way that they may be applied. The Master?s Thesis studies safety in three levels: (i) general - design standards, national safety policies and road hierarchy; (ii) local authority and road administrator; and (iii) three specific safety countermeasures - junctions, pedestrian crossings and traffic calming.

AbstractIn November 2011 the Swedish Government announced that they were conducting an investigation to examine what impact the conversion of existing rental stock to condominiums could have on the development of the Million programme areas. The proposal of converting rental stocks to condominiums aims to help people living in these neighbourhoods to private ownership, while still allowing people who want to continue to rent their homes to do that. This thesis intends to investigate the effects of the proposed reform from a management perspective. The maintenance of the areas built during the Million Programme gets more neglected every year that passes. The majority of the housing stock is rental Properties and extensive renovation of the surface layer, tribes and public spaces are essential in all Million programme areas studied. By transforming a portion of the housing stock into condominiums and by improve the living environment through renovations, these areas would be able to gets more attractive.

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical Properties.

The parallel bars is used in physical therapy and is mainly used for patients who have to train walking and balance after a stroke or an operation. It consists of two long handrails with two legs on each handrail. These legs go down into two ground-plates and are locked at the wanted height with a pin. The parallel bars is an appreciated device and is used on a daily basis in many care units.The main issue with the manual parallel bars is that it is very difficult and heavy for a single person to adjust the height of it. If a larger adjustment of the height has to be done, the legs have to be adjusted one at a time otherwise the they will be locked.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

This thesis has been a part of Forsmarks Kraftgrupp AB's evaluation of a turbulencemodel used in simulation of turbulent flow called PRNS (Partially Resolved NumericalSimulation). This model has promising Properties and may be of use in savingcomputational resources. The purpose of this thesis was to analyze this model andcompare it with industrially applied models such as k-omega SST and LES (Large EddySimulations).PRNS works as a hybrid of the k-omega SST and DNS (Direct Numerical Simulation)where a constant, RCP (Resolution Control Parameter) with a value between 0 and 1are selected. This constant is then used in the calculations and determines thebehavior of the simulation. When RCP is set to zero the equation are the same as fora DNS simulation and when RCP is set to one the equations for k-omega SST issolved.

The storm Gudrun January 8-9 2005 felled about 70 millions cubic metres forest in southern Sweden. The majority of the wind damaged forest was spruce (Picea abies). In order to decrease the risk of wind damages in the future other trees species are of interest for forestry in southern Sweden. The purpose of this master thesis was to study if larch were more wind tolerant than spruce. The method was to compare larch, Japanese larch (Larix kaempferi Lamb.), European larch (L.

This thesis has been performed at Scania CV AB Technical Centre in Södertälje and its aim hasbeen to study the causes and effects of deformations in the interface between the rear axlehousing ADA1100 and the central gear house R780 during operation. Design changes that wouldincrease the sealing capability of the studied interface are also suggested. Finite element (FE)and CAD software have been the primary tools in this study.Finite element (FE) simulations are used in the industry to predict and develop engineeringdesigns. The main motive for FE simulations has traditionally been to identify weak spots in thedesign, regarding high tensions and large deformations.The FE model is an aggregation of submodels and interface models that represents the rear axlehousing, suspension, central gear, central gear housing, wheels, bolts and weldings, and theirinteractions. The submodels have different material Properties and they are connected withcontact interface models.Boundary conditions are defined on the bushings in front of the rear axle and on the air bellowsbehind the rear axle.

This study investigated potato growing in beds as an alternative to conventional ridges.It was based on results from field trials on bed-grown potatoes carried out by Halland Rural Economy and Agricultural Society in 2007, studies of literature and interviews with farmers with experience of bed growing of potatoes. Due to their shallow root system, potatoes are one of the most drought-sensitive crops. Potatoes are often grown on sandy soils with poor water-holding capacity. Factors such as total yield, tuber size distribution and quality defects are negatively affected when water becomes insufficient. Wide beds have a more flat top which leads to more uniform water infiltration. Further on, beds have lower soil surface area due to its shape, and therefore, retain water more efficient. In the field trials, which were carried out at the Stjärnarp Estate near Halmstad, potatoes were grown in beds alongside a conventional ridge-grown crop.

Chlorinated aliphatic hydrocarbons (CAH´s) were used widely within dry cleaning facilities and for metal degreasing until their toxicity was discovered. PCE is still used as dry cleaning liquid. Today CAH´s are found in soil environment at places where they have been used in the past. The CAH-concentration in trees growing on contaminated land has quite recently received attention as a cheap and effective way of assessing the extent of a CAH-contamination. The method has however, not been put into use in Sweden.The aim of the study has been to investigate whether the CAH-concentration in tree cores could be used to delineate the spread of CAH in a soil environment under Swedish conditions in different seasons.

De senaste årens långa och kalla vintrar har lett till ett ökat antal halkolyckor. Genom att undersöka halkolyckors utsträckning samt halkskydd som fanns tillgängliga konstaterades det att ett behov av nya halkskydd fanns. Enkäter för att ge svar på användning av halkskydd togs fram och svar från personer i åldrarna 20-65 visade att man överlag inte använde halkskydd. I stor utsträckning berodde det på halkskyddens dåliga kvalité och den negativa stämpeln som fanns på dem . Textila material undersöktes för att finna lämpliga egenskaper.

This thesis examines conceptions of gender revealed by people when assessing texts. The research questions are: What associations can be discerned between gender conceptions and ideas about the quality of texts? What features of content and style are perceived as female or male? The study seeks to develop a method for comparing different people?s assessments of the same text. The material was collected by means of questionnaires in which 114 informants were asked to assess three anonymous student texts and then guess the sex of the writer. The material has been analysed quantitatively by correlating the assessments of the texts with the guesses about the sex of the author, and qualitatively, as the informants? freely worded assessments of the texts were analysed for content and form with the support of assumptions about how assessments are expressed in text.