The myth of the user - a study of the user discourse and its visionariesThis study is a discourse analysis of the visions that implicitly are expressed in different texts about user-centered library theory. Several other studies have analyzed the discourse and conceptualization of how the user is expressed in the library debate. Therefore we have chosen to analyze the visions that are expressed by three different sources: the evaluation of the Swedish GÖK project, which was an reorganization of three different libraries in Sweden (Greenhalgh, Worpole & Landry 1995). The influential book by Michael E. Casey and Laura C.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

The population growth and urbanisation in low-income countries bring issues of poor living standards and miserable sanitation conditions onto the agenda. If well-functioning waste management systems were developed, this could master some of the problems. The already existing local informal waste handling system that is common in many low-income countries, needs to be developed with proper sorting and composting solutions to decrease the environmental burden and improve the overall situation in the dense cities. This master?s thesis project is performed with the intention of developing functional decentralised waste management units in the city of Pune, India.

This is a final thesis in landscape planning, at the Swedish University of Agricultural Sciences (SLU). The study examines the current phenomenon of amenity migration and the international discourse applicability of the a "Countryside dream" in a small neighborhood in Käglinge, part of the transit-oriented community Oxie just outside of Malmö in the southern part of Sweden. The critical starting point of the study is the how many planners idealize the dense city with its positive proximity qualities. However, since the late 1900s, many people have instead started to idealize living in more rural or naturally appealing landscapes, often just outside a bigger city, with good transit possibilities (both by car and bus as well as by train). The phenomenon of amenity migration ? the migration to a new, more appealing everyday environment considered to have more amenities, is very relevant today since many smaller communities are becoming more transit-oriented, allowing the inmigrants to work in some bigger, dense town while living in a small-scale, less dense semi-rural community. More dense transit-oriented communities are however also an ideal to planners in Sweden, but to what extent can Käglinge in Oxie ? a neither rural nor urban community - fulfill a possible countryside dream, and what role does the train station have in the in-migrants everyday life? The study has a theoretical starting point in literature regarding amenity migration, countryside ideals, representations of the countryside and the possible migrants themselves, giving a broad perspective on these related issues. The case study of Käglinge in Oxie is then presented, including interviews with Käglinges in-migrants.

The findings in this case study are mainly based on material collected during a field trip with a fellow student to Laos in February-March 2005, which was sponsored by Sida through a Minor Field Study scholarship. The original interest was to study a political aid project (Governance and Administrative Reform Project Luang Prabang, GPAR LP) in a country like Laos with very complex preconditions such as one-party polity. In Laos my interest in evaluation of political aid grew mainly because I found out that the two donors in the project, Sida and the UNDP, had reached different conclusions in their respective evaluations of the project.The main interest in this thesis has been to study how donors have evaluated a political aid project. The study shows that Sida and UNDP used, what in the literature usually is referred to as, Conventional evaluation as methodology when they conducted their evaluations of GPAR LP. The study also shows that the main reason for the different points of view that are expressed in the evaluations depend on a lack of dialogue and consensus, regarding for the project crucial concepts, rather than choice of evaluation methodology.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

This project was conducted during the spring semester 2013 at mechanical engineering program at University Halmstad. The project was conducted in collaboration with MPQ Consulting in Halmstad. MPQ Consulting is a newly established company looking to take step into the product development world. The company has already had ideas and existing products. One of the ideas is to construct and design a form of beach games whose rules are based on the volleyball rules.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

The purpose of this study is to investigate the teachers? described experiences of advantages as well as disadvantages of Arne Trageton?s write to read-method (?ASL?) in contrast to the code-oriented traditional way of teaching. The aim of this study is furthermore to depict the teachers? opinions on whether they experience that the ASL-method is unfavourable for students in general. This study will also investigate the teachers? standpoint regarding choice of reading and writing method.

External Thoughts is a studio based project with its purpose to throughworkshops establish contacts and create a dialouge about the content of contemporarygraphic design. The project also aims to apply a design curaticalmethod where the designer is both client and contractor, client and designer.We also wanted to investigate the design content as open-source and examinethe school versus the Internet?s future role in the design and for thedesigner. The project is a collaboration with Rasmus Östgård Ohlson fromBeckmans..

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

Bachelor thesis, Trolley Innovation Project, has been unique in the sense that it has been carried out over the borders of Sweden. Iacobucci S.p.A, located outside of Rome in Italy is one of the largest manufacturers of interior equipment for aircraft in the world. With approximately 30% of the market Iacobucci S.p.A is one of the world's largest manufacturers of catering trolleys.The aim has been to produce a new competitive catering trolley for the airline industry. With customers and users in focus, the project team found that weight, ease of use, ergonomics and design were important aspects. Having a low weight of all the interior is particularly important when there is lots of money for the airlines to save in reduced fuel costs.

The purpose of this Master?s thesis is to perform a user oriented evaluation of the International Library?s website. The questions posed in this study are; for what purpose do the users in this study turn to the International Library?s website; what does the users information searching process consist of when visiting the site; how does navigation, layout and content effect the users satisfaction with the website; do the users in this study consider that the International Library?s website can be improved and if so, how? The study was performed with a user oriented approach where six qualitative interviews with librarians who use the website were conducted. These interviews were analysed using Brenda Dervin?s Sense making-theory and Leclercq?s theory about user satisfaction.