Projekt har blivit en allt vanligare arbetsform i dagens organisationer, men trots arbetsformens ökande popularitet inom flera olika sektorer så är det inte ovanligt att problem uppstår i samband med ett projekt. För att erhålla en ökad kontroll över ett projekt har därför sofistikerade projektstyrningsmetoder utvecklats, främst av militära myndigheter i USA. Syftet med denna uppsats var att beskriva hur en av de framtagna metoderna, EVM, kan vara ett verktyg för projektstyrning och hur metoden bör implementeras. Vi har också undersökt vilka problem som kan uppstå vid ett byte av projekstyrningsmetod. För att uppnå syftet med uppsatsen har vi genomfört en omfattande litteraturstudie samt en fallstudie på SSAB Tunnplåt i Luleå.

Mechanical scaling is one of the most complex operations of all in the mining process. The operators are using both hearing, sight and feel to read the rock and to know where to scale and where to leave. They say they go on gut feeling in great extent, something that comes with experience. The scaling machine is placed into the edge of unsecured and newly blasted rock to hammer off the blocks that has become loose after the blast, but not enough to fall down. It goes without sayingthat it is a risky job.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

The purpose of this paper is to standardize and simplify the design work on a few specific types of storage brackets for balconies. The company Balco AB had the wish to simplify the design work in the preparation of attachments to their balcony structures. This would be done by a calculation matrix that could be produced which then in turn could be used for each new project by the company. The design work behind the development of these fittings at each new project is costly both in terms of time devoted by each calculation but also the cost of the time. The purpose of this report is that in a systematic manner, a calculation matrix can be created that then the company instead may follow from each new project.In carrying out the project used HILTI calculation program, which was provided by the company HILTI.

The aim of this project is to study the work that has been done by the youth welfare to prevent accidents and to increase the preparedness in case of fire. Further the aim is to develop a basis to improve the interaction between the fire services and the youth welfare. The conclusions that were made during the project can be used to increase the safety of the environment that estates by the youth welfare..

During the spring semester of 2009 I have participated in what was to become the project The Allotment Plot; a collaboration between the Swedish University of Agriculture and the Wanås Foundation. As one of six students in landscape architecture I have experienced a group based learning process with the point of departure in the designing of an organic and experimental kitchen garden at Wanås, a sculpture park for contemporary art. The project came out as neither us nor any other of the people engaged could have guessed. What was meant to be a garden turned out to become an entire cultivation movement. As students, we have gained a lot of experience through praxis; experience that will be valuable for our future profession. The project has also opened up the possibility to question and reflect upon what our profession and education could or should be about. This thesis focuses on the role of communication and the production of communicative tools in design processes and landscape architectural practice. It discusses how communication may be used in an exploratory and ?un-securing? way, and how this may dislocate the professional role, especially in situations where the design action, as in the case of this study, demands a high degree of transdisciplinarity and collaboration. .

This major project in Building Engineering has its focus on inquiring into what methods has been used in the planning process of the residential buildingLjusbojen 1. This project has been conducted in cooperation with Kadesjös Ingenjörsbyrå AB, an engineering contractor firm which also acts as the property developer. Initially several different general methods for planning residential buildings have been presented. After the methods from the process of building Ljusbojen 1 has been analyzed compared to the general methods presented in part 1. This shows what the determining factors are during the planning process; factors such as cost, quality, time management, know-how and environmental issues.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Our surrounding world is constantly changing and to be able to keep up with the fast pace of change organizations need to be prepared to transform as well. If there is a need for an organization to undergo a change process, the people constituting the organization also need to be prepared to change their behavior. In order for the change process to turn out successful, it is of the utmost importance that all employees are given the chance to take part in the process. The challenge for leaders during a change process is, therefore, to ensure that their employees actively get involved.The purpose of this study is to apply Human Resource (HR) theories on to an organization in order to critically review how leaders in practice, can involve their employees, on the basis of a change process.The study is a qualitative case study, the empirical material has been collected at Falkenbergs Sparbank with the help of one unstructured interview with an employee at the marketing department and four semi structured interviews with the office managers.Relationship oriented leadership is beneficial to use during change since it advocates an open relationship between co-workers and exchange of information and knowledge. Relationship oriented leadership is considered to be a good leadership style if organizations wants to turn Human Resource theories in to practice.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated.

This degree project was intendet to construct and design packaging for beauty care. At the requestof AssiDomän Frövi the project group were instructed to innovate creative packagesmade of their cardboard Frövi Bright.Three different packages have been developed. Two of them are for child care products and onepackage is for several bath products. These results show that there are possibilities to create creativeand different packages of the cardboard Frövi Bright.The report also enters deeply into the special qualities of Frövi Bright and studies of packagingdesign..

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

In recent years, Information Technology (IT) has gained more importance in workinglife. More and more organisations has shown an interest about how technology can beused to manage the competence of the employees, and how IT can contribute to thedevelopment of the organisation. In order to achieve this, there is a need for suitabletools to support this process. Even though the implementation of competencemanagement systems (CMS) is a highly up to date question for many organisations,there is a lack of scientific reserach concering this area. This study will contribute tothe research area by examining how CMS is used by employees in daily working life.The manager and the employees in a healthcare organisation in Sweden were observedduring appraisals in order to observe how they used the CMS to evaluate competence.The appraisals were considered a suitable place for studing CMS in use within anorganisation.By using theoretical perspecitves such as the Sociomateriality and Situated Learning,the study can contribute to the knowledge of the entanglement between technologyand working practice.