Sökresultat:
12640 Uppsatser om Project work - Sida 56 av 843
BIM i produktionsskedet
This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.
Metod för att bestämma drifttid
The usage time is an important part of the specification for products powered bybatteries. The usage time is affected by a number of different elements; technical,environmental and how the product is being used. The method to determine theusage time is intended to define how measurements and calculations are to berealized along with influencing factors to keep in mind. With support from thismethod the intention is to gain control on how well the established usage time canbe expected to cohere with the real value and what affects the value.The study is done specifically for hearing protectors with battery powered built inelectronically functions. The functions can be level dependent function forambient hearing, 2-way radio communication, Bluetooth or FM-radio.The first chapter of the report describes the literature study performed in theproject.
En ny Upplevelse - En studie i formgivande av interaktioner på webben och effektivisering av arbetsflöden
We?re all aware that technology progresses forward with giant leaps on a daily basis. In
one-way or another this affects us in our everyday life. It can affect us in the way we?re shopping, communicating, researching, planning future events or how we choose to
be entertained.
That the web is an increasingly stronger tool for communicating in more or less every
type of business is becoming more evident for people.
Koldioxidutsläpp vid vägbyggnad - en fallstudie med jämförelse av alternativa byggnadssätt
Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.
I huvudet på en lapplisa : En studie om hur parkeringsvakter upplever sin arbetssituation
The aim of this study is to examine which factors in a traffic wardens? situation at work that promote and which that inhibit satisfaction at work. The aim of this study is also to examine if there are any differences in the work experiences for traffic wardens that work alone versus those who work in a team of two. The following questions are examined in the study:?Which factors promote and which factors inhibit the work situation for traffic wardens??Are there any differences between traffic wardens that work alone and those who work with another colleague?The selection consisted of eight traffic wardens, of which four of them work with another colleague while the other four work by themselves.
Med andra bilder inga ord. En illustrerad berättelse.
This project has been about illustration, text and format with illustration as the main communication path.A study has been made of how these three elements interact, particularly how text and format affect the illustrations. The goal has been to create an illustrated story in a form of a book. The story is about the feeling of being alienated from other people and invites the reader to make their own interpretations. The main target audience has been the ones who is interested in illustration and storytelling, no matter of age.Colors has been inspired from animated movies and the natur. Various textures such as wood, fabric and metal for example has been scanned to create a rough feeling.
Verktyg för tillskärning av nätisoleringsmatta : Produktutvecklingsprojekt för en effektivare och mer användarcentrerad metod för tillskärning av nätisoleringsmattor
This report covers a product development project conducted as Bachelor of Science thesis forthe Innovation & design engineer program at Karlstad University.The assignment was supplied by MMB Consulting, Kristinehamn. The purpose of this projectwas to find an alternative way of shaping wire-net insulation mats. This insulation product isused for fire and thermal insulation of technical installations. The insulation consists of stoneor glass wool with a sewn on steel wire netting on the out facing side. This netting has thepurpose to enable fastening to e.g.
Gränslöst. En global utställning på Historiska museet
This thesis is a report concerning the practical aspects on exhibition techniques. During an internship at the National History Museum in Stockholm I participated in the work with their new, temporary exhibition Gränslöst - en global utställning på Historiska museet [Boundless - a global voyage of discovery at the National Historical Museum]. I was part of a small project team of museum staff. The purpose of this exhibition was to show how cultures have met and influenced each other throughout history. The National Historical Museum has in its collections and exhibitions several examples of objects that has been imported from or inspired by other cultural areas.
Eskalerande projekt i offentlig sektor - En fallstudie av polisens utredningsstöd
A large number of system development projects are allowed to proceed for too long, and leads to undesirable project outcomes. Research shows that more than half of the authorities involved reported that at least one of their projects have exceeded their budget, and that a third of all the projects had exceeded the budget. This problem led to the following research question: ?Which factors can explain projects continued escalation within public authorities?? To answer the question, a qualitative case study of the Swedish police?s implementation of PUST, a sort of case management system was conducted. The project received considerable media attention and a large amount of criticism was directed towards the project, partly because the project exceeded the timeframe and budget set at the start.
Ledarens förmåga att påverka och främja medarbetarnas arbetsmotivation : En kvalitativ studie om hur arbetsmotivation främjas inom en statlig myndighet
The study aims to increase understanding and knowledge of motivation; this by examining how the leader experiences her capability to promote employees' work motivation. Also, how employees perceive that the leader influence and enhance their work motivation. Interviews were conducted with a manager and two employees of a government agency in Sweden. The results demonstrate different opinions between manager and employees in the manager's ability to foster motivation in the everyday work. The leader thinks that she promotes her employees work positively and believes that she is giving her employees attention and appreciation.
Framgång, med eller utan karriär? : Unga vuxna om karriär i mediabranschen
The aim of this study is to enlighten how todays working environment affects young individuals descriptions of how to reach success in work life, now often titled as ?career?. Our purpose has been to analyse how the term career is constituted discursively among young people in jobs characterized by flexibility. The study is based on six qualitative interviews with young adults in the media industry, all between 20-30 years old. By utilising a Foucaultdian discourse analysis we want to expose how the competing and dominating discourses, that our interviewees? statements are based on, can be associated with a wider social context. The study reveals that our interviewees describe career in two separate ways, both positively and negatively.
Utveckling av nytt koncept till processmaskin
Metso Paper offers a front-running range of solutions and services for the pulp and paper industry. At the baling unit, design solutions are developed for manufacturing and handling of pulp bales. The machines are continuously developed to satisfy customer needs. One big step in the development of the baling line was to remove hydraulics from the machines and replace it with electrical motors and pneumatics. This was not done on the folding machine which is still driven by mainly hydraulics.
Att sätta ord på det som sitter i väggarna : Om ett projekt till förmån för elever i behov av särskilt stöd på gymnasiet
The aim of this study was to explore and increase understanding of how a team of colleagues at an upper-secondary school in Sweden works with students with special education needs. The team works with a group of students where the majority have experienced school failure in elementary school. The focus of the study has been to analyze a project that the school undertook 2013 to improve students? results and improve their chances to successfully graduate from their program. Data was collected from relevant documents and interviews with members of the project at hand.
MILJÖCERTIFIERINGSSYSTEMET MILJÖBYGGNAD I PRODUKTIONEN : En fördjupning inom området ?Material?
The environmental assessment system Miljöbyggnad is a Swedish system initiated by Bygga-Bo-Dialogen to assess buildings with regards to three main areas; ?Energy?, ?Indoor climate? and ?Materials?. A building can obtain three different classifications depending on how well it manages to meet the demands. GOLD is the highest classification and is followed by SILVER and BRONZE. The majority of the measures needed to comply with the demands are done during the design phase.
Igloo
This degree project has been performed along with Classic Garden in Gothenburg andBallongfirman Far & Flyg in Stockholm. Together we have developed a sun- wind- andrain protection. The protection is permanently assembled and mainly intended for publicenvironments as restaurants and outdoor cafés.The design on the sun protection was already done so our task has been to develop theconstruction and to build a prototype in scale 1:4 and one in scale 1:1. The look of thesun protection is approximately as the name implies, equal an igloo. The lamellae aregoing to fold out in different steps all the way down to the ground and the both sides willbe independently of each other.The first stage in the project was to develop differently principle proposal on how thefunction will work when folding in and out the protection.