This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

This is a thesis report from SLU in Skinnskatteberg, the Swedish university of agricultural sciences. This study is an evaluation of a course in attitudes and behavior for participants of the ETT- project led by Skogforsk, the forestry research institute of Sweden. They do research for the benefit of Swedish forestry. The ETT-project is a project where there are both 74 tons ST-trucks and 90 tons ETT-trucks in test on the public roads. This study is concentrated on the ST-trucks and their drivers, company owners and logistics managers. The evaluation is done by interviews with the various participants.

This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

This thesis has examined the Tekla Structures modeling software and answered the question of whether it could act as a suitable modeling program for the design department at Bjerking AB in Uppsala. The method used in this work is a case study of a previous project with existing basis to work form. The demarcation of the study was to examine only the usability of the foundations of in situ concrete. The work examined three main areas within the design process. The first was to model the concrete elements then to model the reinforcing and ultimately production of the drawings. Because Autodesk Revit was the existing modeling program in the Department conducted the evaluation as a comparison between the two programs.

This report is the result of a sub-project of a larger project to create a platform formathematical education. The sub-project focuses on authentication with associ-ated security, where security is emphasized. The project environment is Java EE 6where GlassFish 4.0 acts as the server. The project has been divided into threeparts; password encryption, Java EE authentication and brute force attack. Thepassword encryption part focuses on examining different hash functions executionspeed, the result shows that none of the examined hash algorithms is suitable fordirect use.

How can a vacuum cleaner motivate you to use it? From a sustainability perspective,the author asked the question of how such a solution would looklike? These where issues that the project tackled and devised solutions for. Theproject wanted to explore the physical modeling and a large part of the finalresult consisted of a full scale model. The project found that the problem ofvacuuming largely consisted of the problem of storage the product. The projectfound that the motivation for the job, therefore, could be resolved by a betterdesigned vacuum cleaner with a built-in hose, folding handles, which couldbe stored integrated within the vacuum cleaner.

 Abstract This paper is to examine a specific integration projects by the name of SFINX, the participants' perspective. We chose to highlight three themes that concern the analysis what the participants thought about the content / efficacy, effectiveness and efficiency analysis, which means what the participants thought could be improved in the project. What emerged in our study is that research shows that Swedish education with professional orientation and integrated practice is a key factor for migrants to get into the Swedish labor market. And that Sfx teaching has been implemented in several places with good results. SFINX is also a Sfx project but is addressed to engineers.

In the city of Kungälv, there are many important green areas without park lightning. This makes it unsafe to walk through the city's most attractive surroundings during many parts of the year. Partly in general and partly specifically for Kungälv, this paper shows that there are strong long-term arguments for making parks available by the use of lightning. This is not about lightening up the whole city, but finding the important green communication paths and parks. This paper also reflects upon how to lighten up these green communication paths and parks for best result. That is a question about creating good sight conditions ? safe and attractive parks which attracts people to use them. Offering a city's inhabitants good and attractive alternatives to using the car is an important task for city planers.

?Optimizing the workflow of hydraulic reservoir tanks? is a degree project made by Jonas Olsson, student within the faculty of technology and science, during spring semester 2012. The project comprise 22,5 ECTS.Volvo Construction Equipment, located in Arvika, was the client in this project. The mentor at Volvo CE was A?sa Barck, and the mentor at Karlstad University was Monica Jakobsson.

The ways designers work with craftsmen in other countries can vary alot,but still there are many similarities. In this study we make comparisonsbetween a number of projects involving three different designers and artisansin other countries and parallel that to our own work in South Africa.What we have seen is that there is some common denominators betweenthe different projects that are being taken care of in different ways.Some things that commonly attract the designers seem to be the skills ofthe craftsmen, as well as their colouring, patterns and materials. A furthercommon denominator in the projects is that people?s perception of qualityhas become an important issue. The products that are being developedare often sold in the country of the designer, and therefore a needto insure that the quality of the products is up to the standards expectedin that certain country has occurred.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

The examination has been performed at Bjerking AB, which is an architectural and engineering company. Bjerking AB has the ambition to be a member of Green Building.The Green Building program developed in year 2005 by The European Commission, the program is an environmental system with the aim to improving energy efficiency within the sectors of non-residential buildings. The minimum requirements to participate the program are following: in new-built buildings the calculated energy consumption must be 25 % lower than the requirements in the BBR (Building regulations) and in refurbishment the reduction must be 25 % lower than before the optimization.The aim of this study has been to examine and review the company Bjerking AB's energy efficiency work in the project of building the school/kindergarten S:ta Maria Alsike, where the goal is to get this building Green Building classed. A description of requirements to become a member of the Green Building has also accomplished in the thesis.The methods performed in this study are literature review, searches on the Internet, studies on the project database for facts/values, calculation of energy consumption and interviews of members of the Green Building. The following issues have been dealt with in the report;-          Did the building in the project manage the requirement to achieve an   energy consumption that is 25% lower than the requirements in BBR?-          What technical measures/system was selected in the building?-          What kind of cooperation was the project based on?-          What is required for consultancy companies and real estate owners to become members of the Green Building?The study of the project and calculation of estimated energy consumption in the building, give the result 47 kWh/m2, year.

Social work is a social phenomenon, existing in most societies, that has given rise to a multitude of special organizations and professions. For that reason social work is dealing with a complex identity. The purpose of this study is to illustrate how social workers and the scientific discourse interpret the concept of social work. In addition to that the study intends to show similarities and differencies. The research process containes two studies, one based on qualitative interviews with five social workers and the other consisting a surway of academic litterature.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.