Many IT projects that have been developed in recent years are often considered to be unsuccessful. According to a study by Exido up to the 72% of all IT projects are considered to be failed. A failed IT projects means that the organizations that have ordered the new system may have higher costs or/and the system will not be ready in time. If costs are too high the new system might not be installed in the organization or if the system is not completed within the specified time frame the organization can become stagnant.In this paper we conduct an investigation of the failure of IT projects there we will examine where, in the systems development lifecycle four different phases, projects fail. We will conduct an empirical study of each phase, where we describe the key steps in the process; we will also investigate failed IT projects that are linked to the current phase.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

This study investigates how productivity works when employees have remote work in their workplace. This study will also focus on challenges that cause productivity to decrease when remote work applies. The empirical data shows that individual productivity increases when employees work in a workplace that provides remote work. The data says that less distractions and high autonomy is a big factor to why employees feel that they work productively at home. Briefly it shows that a flexible workplace makes individual employees work productively and even motivates employees to work effectively because of increased concentration and undisturbed work environment.

With a starting point in a project for reinforcing small scale business among immigrants in Sweden, carried out within Swedish for immigrants (sfi), the aim for this thesis is to examine the project from the view and experiences of the participants. Interviews with participants in the project have been inspired by the teoretical and methodological views of Grounded Theory.The interviews show that some participants want to start their own business, but almost as many don?t have that dream. The former group all have experience of being self-employed. They are aware of the difficulties but are nevertheless determined to proceed their dream.

This thesis processes the work of developing CPU code and GPU code for Thomas Kaijsers algorithm for calculating the kantorovich distance and the performance between the two is compared. Initially there is a rundown of the algorithm which calculates the kantorovich distance between two images. Thereafter we go through the CPU implementation followed by GPGPU written in CUDA. Then the results are presented. Lastly, an analysis about the results and a discussion with possible improvements is presented for possible future applications..

Students at the School of Engineering at Jönköping University have on behalf of the swimming organization ?Nässjö Sim och Livräddningssällskap? conducted research on how to monitor and evaluate swimmers and swimming groups in a simple and efficient manner with a focus on usability and user friendliness. Since no system existed that could meet these requirements, the client had a desire to tailor and develop such a system. The purpose of this work was to develop a system that would work as a tool to be used by coaches and swimmers alike and allow them to eventually follow the development of swimmers and swimming groups. The organization also wanted to have the ability to create tests and exams, both for land and water training, register these in the system and in a structured way know which swimmers took and passed these.For this thesis, the following questions functioned as a framework for progress.UsabilityHow to design a usable system and what is required?SystemWhat type of system is best suited to meet the client's requirements and preferences?Competition resultsHow can one retrieve all the competition results for swimmers of Nässjö SLS?DatabaseWhat type of database is best suited to easily share data with an external existing database?Usability has been the main focus throughout the project.

Abstract:Because personal assistance is relatively new in social care in Sweden we were interested in to get more knowledge in how supervisors for personal assistants worked. In our study we choosed to look into how the supervisors worked with the physical work environment for the personal assistants. The questions we wanted to found answers for in this study was, which work directions the supervisors for personal assistants have around the physical work environment, which legal provisions there were around the physical work environment for the personal assistants and how the supervisors experienced the work with the physical work environment for the personal assistants. We did a qualitative interview study with supervisors for personal assistants. We realised in our study that there were big differences in how the supervisors for personal assistants worked with the physical work environment for the personal assistants.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

Tourism in the Arctic and Antarctic is increasing rapidly. In both Polar Regions, the cruise tourism is predominant. Several of the tour operators arrange trips under the banner of ecotourism, meaning that the trips should be ecologically sustainable. To ensure ecotourism standards there are different types of certifications; for cruise travels in the Arctic there is AECO (the Association of Arctic Expedition Cruise Operators) certification, and for travels to the Antarctic IAATO (the International Association of Antarctic Tour Operators). Promoters of ecotourism argue that these trips are important because they create support for conservation work among tourists making them ?polar ambassadors?.

Ecolean Development AB are developing and manufacturing filling machines for pasteurized liquid food products. Because of lack of any appropriate supplier of box closer which seals boxes with small flaps, they have decided to start a project to develop a prototype of a box closer. Due to long experience from industrial automation I have been given a chance to develop control system for a box closer. Degree thesis involves electric design in ELPROCAD ic PRO and programming of PLC (programmable logic controller) and HMI (Human Machine Interface). The report describes degree project from the project plan phase via the development phase to the conclusions.

Cover Story is a project, which students at Lillholms - and Ekholms School worked in during spring and fall of 2009. Several school subjects were integrated in project; social studies, art and Swedish, to empower the students to create, implement and design a magazine. The purpose of the project was to give the students the opportunity to fantasize about the future and their dreams by creating their very own Cover Story. During the project I realized that the student?s selection of magazine genre had a direct relation to the gender of the students themselves.

This project practise methods used in the interaction design discipline to develop a concept related to the Swedish Guinness World Records Magazine. This project is a challenge to accommodate both the users? and client?s needs. We focus on interaction and the experience, which is acquired through the use itself, and how to connect it to a theme from a client. The aim of this project is to create a meeting place for children where they can interact with technology.

This study looks into the possibility, and profitability, of expanding a pilot project that has been put into action at GGP Sweden AB in Tranås, a manufacturing company that produces front mowers. The pilot project is meant to give GGP Sweden AB a more precise control of the flow of goods from their suppliers, and its essence has proven to be quite similar to the Japanese Just-in-Time philosophy.The study has been divided into four separate areas; mapping, supplier selection, supplier evaluation and cost analysis. These areas represent a holistic perspective on the expansion of the pilot project and cover topics varying from methods of finding suitable JIT-suppliers, constructing Key Performance Indicators (KPI) to reviewing costs and assessing profitabilities.In this report, the reader will initially take part in the works of mapping GGP?s manufacturing unit, pilot project and supplier base, which results in a list containing the most suitable suppliers for a Just-in-Time based collaboration. Afterwards, the reader will be led into the area of supplier evaluation, where five KPI?s are created with the purpose of ensuring that GGP will be able to evaluate their suppliers and pilot project in an effective way.

The purpose of this study is to contribute to our knowledge about what methods? teachers say they use in the work with pupils? early reading acquisition, and how they evaluate the pupils´ reading development. I also like to find out what educational interventions teachers believe that pupils with reading difficulties need, and how they say they work to meet the needs of these pupils. The project is based on the following questions: What methods do teachers say they use in the work with pupils early reading acquisition? What extra resources do teachers consider that pupils with reading difficulties need? How do teachers evaluate children's reading development? In order to answer my questions, I've done qualitative interviews with three teachers, at two schools, in two medium-sized municipalities.

Websites today only offer simpler form of technical analysis and are not fun to use, therefore student decided to build a website that makes technical analysis a bit more fun by giving user possibility to experiment with settings for technical indicators and also see clear visible results from analysis. Student decided to build website in ASP.NET. Technical indicators for this project only consist of those who give buy and sell-signals via cross-over, no divergence or pattern finding.This project has three questions that define this project. It?s important that there is good functionality so that performing an analysis is perceived as simple, one question is therefore; what functionality for website is needed in order for analysis to be perceived as more simple?Technical analysis is a pretty complex subject and demands an interface that is perceived as easy to understand and easy to use, it?s therefore important that the interface is well designed, second question is therefore; how should the interface be designed to be user-friendly?When systems grow large they often become hard to develop and later on unmaintainable because of the accumulated complexity and dependency between classes, the code is a mess, the last question is therefore; how can the systems complexity be eased with object-oriented design principles?Jakob Nielsens ten heuristics for User Interface Design were used as inspiration for designing the interface for the website.