The construction industry is one of theindustrieswithmostinjuredinSweden. There is reason to believe that there are deficienciesinhow the work environment iscommunicatedbetweendifferent parties. Interest in theworkenvironment has increasedin recent years,whichmakes problems and shortcomingsin this subject highlighted to a greater extent. There are severalways to workwithwork related health on the building sites. The Work Environment Plan isa tool that earlyin the planning of the project call attention to the risks and as far as possible prevents them. The purpose of this report is to improve how the workenvironmentreaches the production and how it is applied in everyday work.

The development of the radio medium ? a case study of Sveriges radio is a scientific report of the case study that was made in the spring of 2014 on Sveriges Radio Västerbotten. The report investigates and analyzes how radio has been developed.The purpose of this study is to analyze the production flows of the radio and explore how it has been developed. The project?s objective is to raise the knowledge in media development, primarily radio?s development.The scientific theory is based on the concept of media convergence, in this chapter the reader will learn what media convergence means, but also how it works in the media world and the Public Service.

Today there is a research project undertaken by the Swedish University of Agricultural Sciences along with Wången (a highschool specialized in trotter training), which focuses on trotting horse training, performance and health. The project investigates how exercise intensity and feeding strategies affect the development of growing horses. The project includes two groups of horses where all 16 horses are fed in the same way. One group of eight individuals are trained 100% compared to conventional training and the other group are trained 20% less than the other group. All horses are trained twice a week and are out at pasture beyond that.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

The majority of the Swedish population were self-provided within agriculture a hundred years ago. Times do change and today the situation is the other way around - most of us live within city boundaries and only few work with farming and related agricultural businesses. One thing that has not changed though, is the need of supplies from Swedish agriculture.What do we think of those products? Are we even aware of the connection between us and agriculture? The Federation of Swedish Farmers, LRF (Lantbrukarnas riksförbund), started their project to strengthen the link between consumers and producers in 2008.This paper is part of the project and its aim is to investigate consumers' views and values upon the effects and products from Swedish agriculture.Opinions and values have been studied through interviews influenced by phenomenology. The results show that the informants in general had a positive approach and thinking concerning the products and effects from Swedish agriculture.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

During the nineties, ecological handling of urban storm water became very popular in Sweden. Together with Chalmers University of Technology and two Swedish communities, DHI Water and Environment has been doing research of storm water ponds and constructed wetlands. This thesis work is a part of that research project. The work has been applied at the Bäckaslöv storm water treatment plant in Växjö, Sweden. The plant consists of one storm water pond and a downstream constructed wetland.

The aim of this study is to enlighten how todays working environment affects young individuals descriptions of how to reach success in work life, now often titled as ?career?. Our purpose has been to analyse how the term career is constituted discursively among young people in jobs characterized by flexibility. The study is based on six qualitative interviews with young adults in the media industry, all between 20-30 years old. By utilising a Foucaultdian discourse analysis we want to expose how the competing and dominating discourses, that our interviewees? statements are based on, can be associated with a wider social context.  The study reveals that our interviewees describe career in two separate ways, both positively and negatively.

How does IT-consultants reason in their consulting process regarding the development of a clients IT-based internal recruitment system? The purpose with this paper is to investigate how an IT-consultant is reasoning in a consulting process and investigate whether consultants are using established models and methods in their work. We have chosen to work with a qualitative examination to attain our purpose. In our work gathering the empirical facts we have been working with a case study, an observation and a simulation exercise. The combination of these has made it possible to carry out the paper and produce the most correct data possible. Conclusion: We state that IT-consultants do not use any theory-based methods, they use process methods created by themselves and their company.

Today it becomes more and more important to work with continuous improvements to stay ahead of the competitors. Pfizer in Strängsäs started working with continuous improvements in 2010. By the end of 2012, the company?s goal is to reach 24 improvements per employee at the factory.Their project has two main purposes; to examine the need and possibilities for visualization regarding continuous improvements at the production department and to develop a concept for visualisation of the entire factory?s continuous improvements.To attain the information required to examine the needs at the production department, interviews with relevant employees at the department were conducted. Using interviews as a benchmarking instrument was also helpful in getting different points of views.

The right touch is a project investigating the necessity of the graphic designer in relation to prose text.The project is partly theoretical and partly practical. A series of interviews with graphic designers, publishers and writers has been conducted to discuss the relationship between content and form in prose. In addition to these interviews, I have done theoretical research on the historical, political and economical context of the designed prose. Based on the findings during the theoretical research, a series of practical experiments was also executed. This project has had several outcomes but one of the more noteworthy is two methods for challenging the references in the act of designing prose (choosing a typeface, for example) using algorithms.

The thesis deals with evaluation of tenders for communal construction procurement. Each year the public procurement equals the value of millions of Swedish kronors, of which construction projects makes up a large proportion. These projects tend to often exceed their budgets. The aim with the thesis is to investigate if there are faults in the tender evaluation process. The theoretical framework for the study partly consists of a review on how the communal evaluation work is described in law and practice.

Under framtagandet av nya produkter måste ett antal prototyper tillverkas för att verifiera konstruktionen. För en metodingenjör som tar fram reparationsmetoder innebär prototyptillverkning att tankar som växt fram under utvecklingsfasen kan provas för första gången på en fysisk produkt. Detta sker relativt sent i produktutvecklingen och eventuella ändringar som kan uppstå på grund av att servicevänlighet inte uppnås blir mycket kostsamma. Om däremot prototypen där metoderna verifieras för första gången är digital och detta sker tidigt blir kostnaderna för eventuella ändringar avsevärt mycket mindre. Modellen som ligger till grund för metodstudierna kan sedan används för att skapa ett utkast till service litteratur, detta medför att även den delen av slutprodukten kommer att vara i fas med övriga utvecklings avdelningar.

In this project, an area in the small town Tungelsta south of Stockholm, is in focus. Tungelsta is placed in the municipality of Haninge and it is for the planning department on the municipality, this project is made. The task is to compose an arrengement of buildings and open spaces for a 50 hektar area. Today the area is consists of agriculture fields and forests. The area is placed near the railway station, in the city centre of Tungelsta, which makes it interesting and important to work with. There are different opinions about the future plans for the area.

This thesis has been carried out onbehalf of Lindborg & Sons in Örsundsbroand is a concluding part of the Bachelorof Science program in ConstructionEngineering at Uppsala University. Theaim of the project is to make a plea fora database of good examples of themachine room types using Revit drawingprogram, and work out a correspondingworksheet .At the start of the process it becameapparent that there were somedifficulties in using Revit to creatingmachine room types of the variety whichthe company builds. For modelling ofoblique, curved and irregular lines, Ihad to use my AutoCAD Architecture andthen import them into Revit.The creation of calculus in Excel wastime consuming. On the other hand, it isa one-time work to create the template.The advantage of Excel is that there isno need for a re-calculation at the costof various types of machine hall. Allthat is needed is to replace the variousparameters.