The purpose of this project is to examine the development of the upper secondary school physics course and from this get a better understanding why the course is organized the way it is today. The timeless argument for studying science in school will begin this essay. After that the reader will be aware of when important discoveries in physics were made. Then school history is presented. In this part we are told when the first school started in Sweden, but the focus lies on the upper secondary school and the physics course.

There are plenty of exciting changes being developed in Tre Högar´s Park, which is located in the district of Linero, eastern Lund. A project group representing Linero If, Lugi Tennis and Linero/Östra Torn Health centre, has been created and is responsible for managing a development project of the Park. Their main focus is to create sports, exercise, health-promotion, health-care, recreation and rehabilitation facilities. They view the park area as having great potential and will transform it into a purpose built park for Health and Exercise. There are various authorities involved with and engaged in the scheme; aside from the project group, the municipality of Lund, The sport association of the handicapped and local schools are being consulted.

Detta projekt återspeglar åsikten att det finns stora vinster att göra när redan nu väl etablerad teknik vidareutvecklas, förfinas, och rationaliseras med hjälp av datorisering. Denna rapport summerar bakgrund, arbete och slutresultat för ett projekt där denna filosofi har legat till grund för att erbjuda ett företag strategiska marknadsfördelar inom en redan väl etablerat verksamhet ? Borrning av djupa hål i berggrunden. Projektet Borr IT tar verksamheten ett steg vidare genom att erbjuda visualisering av borrprojekt med hjälp av 3-dimensionell datorgrafik. This project reflects the opinion that there are large profits to be made when existing technology evolves, is refined and becomes rationalized by means of computerization.

The object of this examination project is to produce a method of work sampling at Rapid Granulator AB. The aim is to perform the method at the company and evaluate if it is executable. The study is delimited to the basic construction of the 45-series in the assembly hall.Preparations to produce the method of the work sampling resulted in definitions of activities, a form and a product tree. Several days were spent studying the assembling to learn and understand the entirety.The work sampling result showed a large amount of no value adding time that was used in the assembling. Some of the activities could be reduced and we observed some problems during the assembly process.

The purpose of this work is to study a circulation project in Enköping municipality, where the society?s rest products are used to make beneficial products. In Enköping the rest products from waste treatment plants and private sewers are used to fertilize and irrigate Salix plantations that later are harvested and burned at the local combined heating and power plant, ENA Energy AB, to produce electricity and heat. Possibilities to apply this kind of project ona municipality in Russia are also explored.Guryevsk municipality in Kaliningrad region was chosen since there is a need to improve energy systems and reduce emissions to water and air. This municipality strives to become environmentally friendly.

Now a day?s there is dramatic change from traditional to digital information processing in construction industry. This change can be visualized in the project concept stage where it now has accessibility to join all the data in one place. Location-based planning technique simplifies scheduling by visualizing the schedule efficiently and has many advantages such as might shortened the project period by about 10 - 20 % if the company uses location-based technology, reducing risks in many ways by maintaining production continuity and identify collisions between things etc. Vico Office software has been used for Location based planning technique and in this thesis.The purpose of this thesis work was to demonstrate how location -based planning technology change the scheduling stage in Peab, potentially reducing the project time.

Today many companies are global and can exist all over the world. It is more common that projects are conducted in different locations, from various cities in a country to nations in different parts of the world. To manage projects both traditional practices such as the Waterfall method and new flexible methods known as agile methods are used. How is the process affected when a project is distributed, when the team is scattered in different places? This makes it difficult to create a good project, something we will discuss and try to find solutions for.

The main reason for this project is my interest of our environment. What are our two largest grocerychains doing to maintain our environment? The aim of the project is to show the consumer which similarities and differences there are between ICA and Coop. My questions are: What are ICA and Coop doing to satisfy the demands to preserve our environment, are they going further than they have to? What do they think is important? Environment, price, consumer friendly? Answers: ICA and Coop are working to keep up with the demands, but are they doing more than they have to? The branch is a close world; it's hard to get impartial information. They are turning towards different consumer groups. ICA and Coop has different ways to interest consumers, ICA points out the importance of the meals, while Coop points at the environment. New questions has risen during my work: How far will their own brandnames go? Will ICA, Coop and others have their own farms, producers and suppliers? How can the consumer be protected? The competition will decrease with an increase of their own brandnames..

Lupus is the result of an investigative project in illustration. In my degree-work I have investigated the different guises of the wolf, which I have thenillustrated visually combined with some portions of text. The result, presentedin the form of a book of 36 pages, is narrated in a poetic and free style with meas a personal author. The images of the book tell the story of both the wolf of fleshand blood, as well as the wolf as a symbol. My work is produced with the hope thatby talking about the wolf in a way other than the standard, new ways of regarding apresently endangered but valuable animal, can arise..

In order for construction projects to be completed within the specified time limit while at the same time be financially sustainable it requires thorough preparation and an extensive planning. Most essential is the groundwork and the design that determines the project's progress. There are many aspects to consider in order to avoid inconveniences such as delay, litigation, unexpected cost etcetera. If mistakes are made in an early stage it is very likely that the error will follow the process and become an expensive correction cost towards the later part of the project. In other words, it is expensive to rectify defects later on.

The ambition of this project is to make an overview of the Swedish upholstery industry and to make a suitable complement to the Carl Malmsten upholstery collection.The Swedish furniture industry employs about 20 000 people in 815 companies. Totally the branch had a turnover of 17,5 billion Swedish krona in the year 2000. Of these 815 companies most of them are small family driven companies with low-tech industry. 10 % of the 815 companies stand for 60% of the production. These are large-scale companies and have a hi-tech industry, even compared with other types of industries.

Thesis completed by Johan Arvidsson, Alex Rasooli and Pontus Winroth, students at master program Product development and Design at the School of Engineering in Jönköping Sweden. The project comprises 30 ECTS credits and was carried out during the semester in the autumn of 2007.It was carried out in cooperation with Eksjöverken AB, subcontractor within the truck industry with special knowledge within the area of complicated machinery construction work. Job initiators at Eksjöverken were Mats Svanberg and Kjell Nygard. Dag Holmgren was acting as a tutor from the university. The task was to develop tools for trucks, primary toolboxes but in case of time also under run protection.

I got a request from Eleiko Sport AB regarding them needing help with trying to improve one of their products. The following examination project includes the principal- and primary construction reports within trying to make some improvements and optimizations on a stand for Kettle bells. I have in this project both made my own proposals to the stands legs, proposals on how to strengthen the shelf and also made an optimization of the original Kettle bell-stand. In this report, the project goes from idea to being built and analyzed in Catia, including the creation of drawings and material definition..

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military equipment to see how they can develop normal and fast procurement of equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .