LEDAthe chair as representativean exploring work on added value throughaesthetics and function.The project deals with portraying a chair. A chair thatwill raise questions regarding added value, questioning oursurroundings and not taking things for granted. Through anumber of properly selected words, I have built a collectionof objects that possess the basis of a chair. The words arebased on sources of inspiration; I picked up over the yearsand can be seen as a part of me and my inner self. QuestionsI asked myself concerns the impact of aesthetic and how itrelates to the function.

To me, competing in architecture has always been slightly odd and at the same time exiting. These competitions are one of few occasions were architecture is almost like art. The competition generates a variety of ideas and projects and these are often expressed in a more appetizing and artistic way than traditional architecture. It?s also an art to master the special circumstances and requirements of a competition.

The built environment should be accessible for everyone. A residence shall be functional without creating a handicap for people who have a disability from birth, caused by an accident or of old age. A residence that is accessible creates equal conditions for everyone.In this report the accessibility of newly built blocks of flats in Uddevalla city from 1990 until today are interpreted. One project that is yet to be built is interpreted and compared with the already existing projects. The apartments of seven projects have been analyzed according to today?s regulations of accessibility.

This study is predominantly qualitative. It is also descriptive to a large extent and notoriented towards hypothesis-testing. The study aims at studying what has influenceddigitization of old Swedish dramatical works through the Dramawebben projekt, whilefocusing on the technical solutions. Four different data collection methods have been applied.Interviews and a questionaire with open-ended questions were the two primary tools. Adocument analysis and observations were applied as well.Examples from earlier research to relate to questions about digitization as an institutional andsocietal practice are presented.

This report aims to describing the work behind the development of a masonry heater.The masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

This paper presents the creation of a strengthening visual profile for StretchFlex UF. The project consists of an external as well as an internal part. The external part is on the order of the company StretchFlex. The company is created under the education concept by the name of Ung Företagsverksamhet (Young Entrepreneurship) and has passed on to the Swedish Championships in Young Entrepreneurship at the Stockholm International Fairs. Of that we have been commissioned to develop an updated logotype for the company, for the current does not keep proper quality according to the client.

This thesis has been carried out in cooperation with Burseryds Bruk AB.Burseryds Bruk is a company that manufactures steel strapping. The thesis isabout developing a concept of protection that should be used to protect theoperators from the rotating parts of the machinery lines. The aim of the projectwas to improve work safety for operators working at the machines by producing aconcept for a protective device. The project's first part was based on ergonomic data collection methods tounderstand the operations performed on the machine and the hazard occurringduring the process. The methods used to collect data were, interviews,observations and questionnaires with the operators of the company. This was thenused to make the ergonomic analyzes hierarchical task analysis and link analysis. The data collected from the company's operators was used create 10 conceptswhich were then evaluated.

Scania is constantly trying to improve their product development process, the PD-process.The company, along with others, is optimizing their development process in order to gainadvantage in terms of shorter lead times and larger market shares. For this to happen, a wellorganized process is required.The PD-process is divided into three different phases that are linked together by a hand-overprocedure. Scania Bus has experienced problems that stem from a lack of hand-over routines,and as a result the product development process has been slowed down. This has a number ofconsequences, one of them being the complication of new project initiations.The main purpose of this master thesis was to review the hand-over procedure. Within thestudy the project directive was also to be examined, and a recommendation of how the start ofa new project could be made easier was included.To begin with, a detailed literature study was conducted with the intention of obtaining thebasic theoretical knowledge needed for this study.

The aim of this project is to optimise the sawing patterns used for sawing Scots pine at Säters Ångsåg AB. The thesis has a theoretical approach and does not claim to be fully applicable in a practical point of view. The input used in this project is last year?s sales volumes and prices of sawn products. The input of the timber is collected from the database ?VIOL?.

Most studies regarding wolf (Canis lupus) predation on moose (Alces alces) have focused on the total annual consumption of moose within a wolf territory but few have tried to describe the spatial impact of wolf predation on a local scale. In this study I have analyzed wolf movement data, wolf predation, moose hunting statistics and moose hunter observations to investigate how wolf predation affects the human harvest of moose in Scandinavia. Since wolves prey on mostly juvenile moose during summer, analysis of their summer movement patterns is crucial to understand its impact on the human harvest later during autumn. In this study both reproducing (n = 45) and non-reproducing wolves (n = 12) reduced their movement range during summer to 66% and 67% of their annual movement range, respectively. Reproducing wolves increased their movement range from early to late summer while non reproducing wolves did not.

This bachelor thesis portray a project where the main task were to develop a computer based system prototype for handling of absence report at the upper secondary school af Chapman in Karlskrona. The project has been conducted in cooperation with students from the university programs software engineering and information economy at Blekinge Institute of Technology. Our task as MDA-students have been to survey the process of absence report of today through field studies and give a proposal of a graphical user interface which later were developed by the software engineers. The thesis also handles the cooperation with other students from other university programs..

The project was made in cooperation with Coffee Queen AB, Arvika. The task was to develop and design a new cooler for the milk to Jura Impressa X9, an espresso machine. The good assistance with staff at Coffee Queen and engineers in China and at KPA in Karlstad led to a solution to the problem. It was a long road to get there, many different concepts was developed. When the day came to decide which concept to work with, the choice stood between two different technical solutions.

No infrastructures today are growing faster then communication network. The requirement of being able to communicate in a fast and qualified environment to a low cost increases in line with the development and competition. Itera Networks is no exception when it comes to rapidly developing new and better network solutions for themselves and for their customers. With these requirements in mind their needs for an analysis of the existing communication solution becomes very obvious. This project contains such an analysis in which various studies of the existing network environment have been made.

AbstractThe development of the construction industry is slower compared to other industries. This implies that there must be improvements in this field. One step to increased effectiveness in construction projects is making the construction process more efficient, therefore resulting in a positive result for both the actual construction project and for the overall branch. The purpose of this study is to identify areas for improvement within the municipal housing company Gavlegårdarna completed construction project, who will then contribute to increased efficiency in their upcoming projects. The work has been performed with the help of two case studies examine construction projects "Fullriggaren" and "The three nursing homes." Opinions about what could have improved the efficiency of these construction projects further have been collected with the help of an interview study among some of the project participants involved in both projects.There have been many studies addressing the topic of how the construction process can be streamlined and similar studies that have been previously conducted.

To make wave power more competitive on the market Uppsala University leads projects that examine how to accomplish better efficiency in the production. One of these projects is described in this report and examines whether it is possible to make the production of dovetails more efficient by using an industry robot of type ABB IRB6000 S3 M91. This project is using an already presented working method, from a previous project, which involves that the robot picks up the dovetail and moves against fixed cutting machines where the dovetail will be drilled, threaded and milled. Drilling and threading are the sub operations that will be examined in this project where experiments are made with the presented working method and with equipment from Uppsala University.Experiments show whether it is possible to drill the holes in the dovetail within specifications by using the specific robot and the presented working method. The threading operation is examined theoretically if it is possible to accomplish by using the same working method.