The objective of this project was to develop an application for mobile phones using the Android operating system. The main goal was, with the help of GPS, to pinpoint locations, measure distance traveled and illustrate the progress on a map. Functionalities for just showing the map, fetching addresses and saving to a database was also implemented. The result of the work was a proper application, called MeasureApp, that fulfills the goals set in the planning stages of the project. MeasureApp can be used to measure distances where accuracy is not a main factor, i.e walks or runs.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

The project has sprung out of my imagination. I wanted to find out what happened to my creativity, and my way of making product design if I used the method of putting myself into a fictive world. The project has taught me to rely on myself and my knowledge as a designer.I have made a chair which closes out sounds and gestures in public places. A chair which provides you with peace and quiet in a busy environment..

I varje projekt finns det brister i kommunikation som kan leda till att kostnad, tid och kvalitét påverkas. Varje projekt är en tillfällig organisation med olika företag och olika personer med varierande erfarenheter inom projektering. Detta medför att varje projekt är i sig unikt och hur alla ska kommunicera med varandra kan vara stora frågetecken under projekteringens förlopp. Denna rapport tittar närmare på vilka brister och svårigheter som kan uppkomma i projekteringskedet..

3In the last couple of decades there has not happened much inthe ?farriery?- department. The work procedure, methods andfarrier´s tools have stayed the same over time, which have ledto a huge workload that is wearing the active participants out.So think if you were able to ease the working process of horseshoeingfor a farrier. The farriery is still first and foremost aprofession based on handicraft that has to relay on the farrier´sgood memory, sight and sense. The workplaces for a farrieris most of the time at the hiring horse owner`s stables, whichmakes it harder for the farrier´s to have influence over theirworking situation.

This report will detail the participator view of partnering in Kvarteret Frodeparken. Kvarteret Frodeparken is a new construction project being jointly delivered by Skanska Sverige AB and Uppsalahem AB. The report will focus on the comparison between the participators view of partnering with an emphasis on common partnering goals. The report will also focus on the economical benefits, the time benefits and the social environment benefits you can find in partnering.The principals of partnering are; participants together make the common goals for the projects, make ice breaking activities to improve stakeholder engagement and working with an open economy to find the profitable choice for the project. With a combination of the three principals the team together decide the best solution for the project.

The purpose with this exam project has been to explore how satisfied the buyers of forest land have been with their real estate broker through the transfer process. The respondents had the opportunity to rate a number of different questions around the current acquisition. A questionnaire with 19 acquisition-related questions was sent to 134 people. People who since 2008-01-01 until today, have acted as a buyer of forest land. 80 responses were achieved and the result shows that the majority of buyers have a high gathered satisfaction..

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

This has been a practical innovation graduation project withthe focus of studying the impacts of downsizing on a learningorganization. The study took place at Karlsson Spools in Sala.This has been a part of an ongoing EU project funded by theEuropean Social Fund, ESF. We have, with the help ofinterviews and surveys, gathered information on the presentsituation and with the help of theoretical studies built aframework on how a learning organization is viewed intheory.During our study we found that there are many componentsto a learning organization. The company in question hasdisplayed some qualities that characterize a learningorganization such as a plan to train and further develop theiremployees. The problem we found was lack of communicationand how this has resulted in a less successful outcome of theongoing courses.

Competition in the market of interior design during the last several years has drastically increased. The consumers of today are very conscious about what the market can offer and therefore they have high demands on the products. It is not only the function of the product that matters but also the design that makes a difference. Companies are becoming more aware of this and as a result they have to find a way to set themselves apart in order to attract customers. This realization has led designers and economists to cooperate in a different way than before.

ADORABLE CHILD OF ITS TIMEThis text will describe a inovative project about material, traditions and someideas about furniture for work in an home inviroment. The content is partlyabout exploring ancient marine- and textile techniques to find somethinguseful for furniture of the twenty first century. It is also about the designprocess of creating a sustainable piece of furniture that questions the paradigmathicsabout usage and the context about manufacturing furniture.The text will briefly describe the design process and then reason about theresult in a deeper sense. Questions that has been considered from the verybeginning of the project as well as those one stumbled across during theevolution of the work will be objectives for the discussion. The result will bein focus as a foundation for the discussion and also the values and issuesabout that.

The purpose of this thesis is to examine the organizational buying behaviour in the purchase of travels abroad. We have conducted a case study of two companies, one medium sized and one larger. Our empirical studies have shown that the companies? buying process is divided into two types, the process of recruit a new travel supplier and the process of a straight rebuy of a regular travel service. In the recruiting process we found that the evaluation process of the purchase is an ongoing process that contradicts estab-lished theories.

In this report the two authors, and project contributors alike, describe their work withdeveloping a solar cooker intended for usage in the developing countries of the world.Specifically, the work aims at developing a new, solar heat driven cooking device, possiblybased upon the current product. This should, in comparison to the current product, be lighter,easier to transport and to produce. Also, the new product?s production mustn?t be more costlythan today and the included materials and components must be obtainable from within theBolivian national borders where the product is currently produced. During the project, certainadvantages with a more efficient, and, above all, a more moderately priced product, werediscovered.

The smelting process at Sapa Profiler AB in Sjunnen generates large quantities of waste heat which is absorbed by the cooling water when the aluminum is cooled down. This paper is the result of a Master?s Degree Project aiming to present the conditions for recycling the waste heat. The cooling water absorbs the heat from the aluminum at an average rate of 600 kW and the paper shows that it can be used to replace electrical power consumption for heating the production plant?s facilities.