Background: Knowledge of customer needs is a key factor in companies? struggle to develop successful products. Several studies illustrate that the main reason for failure in product development is lack of customer understanding. Lately considerable changes have occurred. Large-scale mass production is continuously being replaced by customer orientation, especially in the high technological market.

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

In the digital era, new services have entered the public libraries, like seeking information on the Internet, in databases, newspapers online etc. But many citizens do not know that these services exist. The libraries have a democratic responsibility to inform about them. In the county of Östergötland a project started in 2001 where libraries in five small municipalities built websites in which they present all their electronic services available. One of the aims was with the help of different kinds of marketing to reach special groups of people, like adult students, small companies and politicians.

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

The purpose of this paper is to describe methods to computerize a library and to compare theory with a process in a school library. The case study is based on a school library called Sunnerbogymnasiet which is situated in Ljungby. My questions are;- Which methods are parts of the process to computerize a library?- Which methods are used in the process in Sunnerbogymnasiet?- What does the practical process look like compared to the methods described in theory?In the paper I present the methods in the process according to the studied literature and compare these with a process at Sunnerbogymnasiet. The most significant result is that cooperation between the school library and the community library was the most important reason for the choice of library computer system.

The purpose of this paper is to examine how the target to convert the Swedish military aviation industry towards working within the civilian sector was planned and implemented parallel to the target of building a world-class military aircraft. A number of Government bills have been studied, bills directly connected to the JAS-project as well as bills dealing with civilian project ?s for the military aviation industry. The first group includes bills dealing with the JAS-project ?s role in the overarcing defence policy, as well as the Government ?s bill specifying the guidelines for the JAS-project.

As a designer, I find myself daily being confronted with choices which eventually can be summarizedas how we experience something. What?s the function, feeling, what colors should there be, shapes,materials, etc. Different parts will be combined to create an entirety. The only question is why we areaffected so differently by the same entirety.In this project I have examined how the relationship between a space and a product affects ourperception of a coherensy and what it is that makes us experience it so differently.I wanted to find a way to methodically explore the importance of the coherency for the experience ofa product and a space in relation to each other, in order to produce a material that can form the basisfor further work on the spatial context.I?ve looked into the psycological term central coherence and formed a scale that shows the humanabilities to perceive a context in various psychological conditions.

The division of Electricity at Uppsala University is developing a wave energy converter(WEC) consisting of a linear generator connected to a bouy at the water surfacethrough a wire cable called the connection line.During extreme conditions, the wave power plant will experience forces up to 500kN, which lead to unnecessary wear and will ultimately cause the failure of theconverter. To prevent this there is a need for a damper.The wave energy converter works at a maximum efficiency when the translator?sare centered with respect to the stator. Due to tidal movements the position of thetranslator can deviate. There for a mechanical divice that will compensate for this isneeded.This report describes the further development of an earlier project where a tidalwave compensator for a wave energy converter of Seabased AB was developed.

Today´s roofing of dwelling houses is a very time consuming procedure, which includes a lot of different steps on the construction site. Not only does it cost a lot of money, but often do problems with rot and mold occur in the attics of houses today. The use of prefabricated modules has seen a great breakthrough in the field of construction of dwelling houses; at least when it comes to foundations and walls, where this type of approach makes the construction process way more efficient. What no one previous has succeeded to develop is a corresponding system for roofs that meets the demands of a dwelling house. Accordingly the goal of PlusTak has been to come up with a proper module system for roofing of dwelling houses, where the roofing is completed to meet the demands of the Scandinavian market. During the project a lot of effort has been put into customer contacts and the usability of the product, as well in the manufacturing process as on the construction site. This development has gone hand in hand with several practical tests and tryouts.

It becomes increasingly more important that, as a new buisness, both to be seen and heard in an increasingly harder competition situation where the range of similar products and services increase. It requires a well planned and well thought visual profile to succesfully stand out on the market. To give a good impression, this profile should be both distinct and aesthetically appealing. In the making of a new profile it requires creativity to succesfully think in new directions and to separate from the competition.This practical report presents the production process for a designsolution to the new website Röstförmedlingen (Voice agency), a commission from the production and commercial bureau Bartos media. The task in this project was to create a graphic profile and a lofi-prototype that would represent Röstförmedlingen as a buissness.

1995 startade medlemmar ur Swedish Oral Medicine Society tillsammans med Institutionen förData och Informationsteknik på Chalmers tekniska högskola projektet MedView. Projektets syfte äratt utveckla modeller, metoder och datorbaserade verktyg för att stödja kliniker i deras dagligaarbete och forskning. 2005 lanserades webbcommunityn SOMWeb och projektet gick in i sin andrafas med fokus på nätbaserad kunskapshantering. Den virtuella mötesplatsen togs emot väl och detbeslutades att satsa vidare på ökad funktionalitet via Internet.Denna rapport beskriver utvecklingen av en webbapplikation som möjliggör åtkomst av denmedicinska bilddatabas som byggts upp under MedView-projektet. Som utgångspunkt förapplikationens funktionalitet och innehåll står skrivbordsapplikationen MedImager.

Risk management is a key competency that is constantly being researched how it can be improved within project management. The risk management process consists of four major steps: identify risks, assess the risks? significance on the project, evaluate and address the key risks and follow up.The majority of companies seem to neglect certain identified risks, and decide not to mitigate if the risk does not cause adverse effects to the business. To counteract undesirable consequences and help organisations to become more effective at managing risks an initial work has been conducted for a risk repository.The project develops a proposal on the design of a risk repository which aim to effectively support a database implementation. The study includes literature studies which resulted in a relational model for database implementation.

Large-scale land investments is not a new phenomenon, but increasing prices on food and agrofuels have inflated prices on land and has led to an enhanced interest in landinvestments from a range of different actors. The ProSavana project in the Nacala corridor in the Nampula province, northern Mozambique is a large-scale land investment with the purpose of establishing intensive commercial agriculture and is planned to be implemented this year (2013). The project is financed by Brazil and Japan in collaboration with the government of Mozambique. It is not quite clear how large-scale land investments affect the areas they are implemented in and how they can affect the possibilities for sustainable development in these areas. Both opportunities and problems can be observed within the social, economic and ecological dimensions of sustainable development.

This research project is based on observing and Analyzing the Role of a textile merchandiser in managing the supply chain of the Home Textiles In The Buying or retailing, in the Mill and with the Agents. The project also "highlights the comparative analysis of the practices by Followed merchandisers into the retailer side, mills and Those In The Agents', on the basis of the Functions Which Supports the supply chain. In the discussion, We Have highlighted Importance Of The Role Played by an agent and by the merchandisers of Buyer and Supplier in Different situation. By our research work we find out The Challenges face by merchandisers And Then we come up with sometime suggestions.This Research Project Has Been Developed by Contacting and Visiting Hemtex, Brink Textiles, by interviewing the merchandisers working in the Industries like Al-Abid Silk Mill . By Analyzing the data & the data through the visits and the interviews, this Research Project Has Been Combined to give in-depth knowledge about the Activities Which merchandisers performer in a mill and into buying a house..