To make wave power more competitive on the market Uppsala University leads projects that examine how to accomplish better efficiency in the production. One of these projects is described in this report and examines whether it is possible to make the production of dovetails more efficient by using an industry robot of type ABB IRB6000 S3 M91. This project is using an already presented working method, from a previous project, which involves that the robot picks up the dovetail and moves against fixed cutting machines where the dovetail will be drilled, threaded and milled. Drilling and threading are the sub operations that will be examined in this project where experiments are made with the presented working method and with equipment from Uppsala University.Experiments show whether it is possible to drill the holes in the dovetail within specifications by using the specific robot and the presented working method. The threading operation is examined theoretically if it is possible to accomplish by using the same working method.

This reportcommunicates the processes and results of my degree work in industrial design at candidate level at Umeå Institute of Design.During my degree work I had a cooperation with Svenska Jägareförbundet (Swedish Hunters Assosiation).The aim for my project has been to explore how I could make hunting a safer hobby and undertaking. Every year people get seriously injured and in average 2 people a year dies  due to hunting accidents. My goal is to identify problems within the hunters communication and approach. Through a creative design process I will find a valid  nd realistic solution to these problems. My project will be presented as a conceptual solution  hat will be based on currently existing technology.

This study began with a mission statement from the firm Tobii Technology AB to identify customer needs in the relatively new and rapidly growing market for eye tracking analysis. After consuling external experts, the authors however found that the availability of previous academic published market studies of new and fast growing markets was poor. Therefore a decision was made to execute the task and at the same time create a methadology for future studies in this area. The identification of customer needs, which formed the basis of the insights and analysis, led to frequent discussions between the authors and the firm's supervisors. This resulted in a project plan and a decision that an iterative model would be used, were earlier decisions would be questioned and refined throughout the project.

This study is a part of a Swedish research and development project that is about heat-treated wood and is led by the Swedish University of Agricultural Sciences and Luleå University of Technology. Products that are heat-treated already exists on the market, foremost the Finnish brand ThermoWood®, bur the project group want to find out if it would be possible to start a Swedish production with somewhat different applications than what is common today. The heat-treated wood has many attributes that have changed in the heating process. It becomes more biologically durable, it gains stability in form and dimensions and it becomes darker and looses several unwanted extractives such as resin. Disadvantages that can be mentioned are that the wood becomes fragile and the strength properties changes. My main purpose with this study is to look into customer involvement in the early phase of product development. I also want to find out if the customers I interview think that the product is worth working with, which means start a Swedish production.

Department of Education, University of Stockholm. Second year research project, autumn term 2009. The transformation of Swedish officer´s training into an academic professional education ? a study of professional identity in alteration. The study is a part of the Research Project; Discussion for collaboration - from vocational training to academic professional education.By Michael LarmThe purpose of this study is to analyse in what way the process of transforming Swedish officer´s training into an academic professional education are perceived in terms of professional identity, alteration and synergies.

This report analyzes and examines a hypothesis for finding a method to optimize thelength of the delubrication process time based on a total charge weight. The work hasfocused on the holding time for delubrication and the total charge weight.An important step in the manufacturing chain of cutting tools is when the greenbodies undergo the sintering process. Today, the delubrication step has the sameprocess time independent of the total charge weight. An implementation of a methodto adjust the delubrication process time would give more consistent quality of thecutting tool´s internal characteristics but also reduce the time course of the sinteringprocess. In the present project two methods for this goal were tested, thedevelopment of an algorithm and a weight interval subdivision with associateddelubrication process times.During delubrication a pressure increase is observed due to the decomposition of thePEG in the powder mixture.

Medieföretaget AB is a Swedish Media Company that covers several different business areas.The company daily produces one of the biggest newspapers in Sweden and publishes editorialnews on one of the country?s most visited news homepage. The company also has smallerfirms that produce new business models. Due to big changes in the media climate over theworld and a new company management team the company in November 2008 started adepartment for innovation. The main purpose of the department was to create a structuredway for managing ideas and to promote innovation.

We are surrounded by things. They have their own personalities. Some evokes our emotions. We want to own them. We develop strong relationships to each other.

This study is an investigation of a sub community within the community of Hovsjö. The local government has financed a project in Hovsjö which is intended to bring about positive development. The prior object of this paper is to describe the project, it?s planning, it?s methods, it?s carrying through, and it?s goals. This study presents the district of Hovsjö in Södertälje.

The main project Dry preservation of source-separated organic household wastes involves a new technique for treatment of biowaste through drying. Investigations are going on to determine how the dried biowaste best can be used to close the natural circular flow of nutrients. The objective of this degree project is to determine if the dried biowaste can be used as a soil conditioner. By restoring the nutrients in the material to the ground, the natural circular flow is closed. A declaration of contents, including the nutrient levels, C/N ratio, pH and the electrical conductivity of the dried biowaste, was constructed and a germination test was done to make sure that the material did not inhibit sprouting.

In this project I have worked with creating a new kind of room in a hospital enviroment for children. The main purpose of the project has been to form a secure and positive experience for the patient while visiting a specific room at the department of childrens physiologi, at Drottning Silvias Children- and youth hospital in Gothenburg.The project was based on questions like how it is possible to move the focus from the unsecure and scary, to something secure and positive, when the patient is going through an testing situation.The target gruop included a wide age span (0-16 years old), therefore I have worked with a theme, H2O, that works for diffrent ages. In the room, I have applicated the theme in different levels that is changeable depending on the age of the patient.During the project I have presented my ideas for the staff at the hospital. We have discussed their problems, what they wish in their working enviroment and how they experience the situation for the patients. I have also asked the patients how they experience the specific room today.The result of the project is a visual idea of how you can create a room, that you don?t exepect to find in a hospital..

My working process is craft based and influenced by devotion for the textile material and techniques, but the concept is just as important. I mainly do sculptural objects where I treat fascination, frustration and disgust for the human body from a personal perspective. I am also deeply fascinated with Michael Jackson; an iconic figure that I adore above all else. A man with an inner musical ability, dedicated his entire life to tame and signify it through his body. My master work is an investigation where I look upon similarities and connections between my fascination with the body and the admiration and fascination with Michael Jackson.

Contemporary libraries face challenges in transforming their organization to meet the digitalized society. To develop the process of digitization of literature is a natural way for libraries to go when they already have more visitors online than physically. Since the demand for digital material is so sought after, we feel challenged to address the challenges of the Internet as an emerging functional medium for distributing knowledge. These developments will be able to significantly modify the nature of literature as well as the existing system of quality assurance. In this study, we explored and analyzed a digitization project at a research library.

Most people have been forced to throw away a pot-plant after its death. There are many reasons to the death of a plant, but mainly it?s because its owner forgets it, and therefore fails to water it. The purpose of this project is therefore to develop a product which can prevent this from happening, while the product has to have a low manufacturing cost to be able to compete whit other, similar, products on the market. During the project, a benchmarking has been done to give a clear picture of what the product has to compete with. The directives there are for CE-marking, and which of these who concerns the product has also been looked up.

In companies today, it is becoming more and more common for employees to work in a project based environment, as a result many companies have developed their own project models. Companies with a well developed product culture are striving to improve their existing models, and businesses relatively new in the marketplace are aiming to reach a high level of maturity as well as reach high levels of efficiency in the shortest time possible. As the number of mature and efficient companies with well developed project model increase, so does the level of competition in the market. Since a well developed project model often leads to a more efficient and accurate way of carrying out the project, which in turn leads to shorter delivery time towards the client. This is crucial as time is one of the most valuable parameters of competition in today?s business environment.