Entrepreneurial failure is probably a subject that is not well understood. This might have to do with the methodological difficulties of screening out failed entrepreneurs. In this thesis a tool is developed for analyzing supposed entrepreneurial failure. In this model entrepreneurs are surrounded by different stake holders. By using the failure deconstruction model to analyze my own entrepreneurial effort I find that it has neither been a successful project nor a disastrous one.

This project concentrates on musicians who work in a professional music studio.The task of this project was to design a new headphone system called Foldback system.The advantage of this system is that all involved in a music project could influence their ownlistening during the project. With a couple of adjustments should each and everyone get theirown individual listening from their headphone station.This report shows different methods, theories and results that came along in development ofFoldback system. The project has resulted in a finished product that will be in use atStudiomega..

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

This thesis purpose is to determine an explanation of the efficiency in a labour-market related project. ?Enter? is an EU-financed project with a focus on long-term unemployed workers in the district Härlanda, Gothenburg. Starting in September 2004, Enter offers individually based coaching and job guidance to totally 110 young persons with problems entering the labour market. The goal is to provide these people courage to find either full or part time employment or to start study.

Today many industrial companies invest a lot of resources on research and development to resist the tough competition on the global market. This leads to a high risk game when the companies start many development projects, with uncertain outcome where some of the projects have to be terminated prematurely. The main purpose with this study is to identify factors, both internal and external, that influence the decision to terminate projects prematurely in Swedish development projects. Factors mentioned in the literature will be compared with case studies on three Swedish industrial companies to demonstrate the most important ones when taking such decisions. First a literature study was made to identify basic terms, a general Project model and factors affecting the decision.

This project was conducted on behalf of the organization SABO (Swedish Association of Public Housing Companies). The aim of this project was to investigate which relevant environmental aspects and indicators there are for housing companies to present in their sustainability report. The project consists of three main goals: to decide if there is a need for common guidelines when conducting a sustainability report, determine appropriate environmental indicators and to create a simple model of how the companies can present them. This was done by a literature study, analysis of 13 sustainability reports and interviews with seven housing companies. The result of the project suggests that there is a need for common guidelines to, among other things, make it easier to make a comparison with other companies.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

The focus of this project has been on the drainage tank of the reheater on Ringhals 1. This tank has on two previous occasions received such a high water level that the system automatically emergency stopped. For this reason, events and various readings from these two occasions has been specifically studied and analyzed. In order to prove theories about what causes these problems a model of the system was created in the program Dymola. Using simulation results from the model, we have been able to demonstrate how the system's measured values should look likeunder normal conditions with respect to flows, pressures, temperatures, valve positions and water level in the drainage tank.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

The purpose with this masters thesis was to model the scanner in a system for laser bathymetry. The model was then used to develop a controller for the scanner so a good search pattern was achieved. Two different types of models have been tested, a physical model and a Black Box model of Box Jenkins type. The physical model has been derived from Lagranges equations. Identification experiments have been used to compute the Black Box model and to find the unknown parameters in the physical model.

Stockholm is constantly growing and changing. Despite this, for various reasons, it is difficult to execute large building projects. With starting-point in decision making theories we have tried to investigate these difficulties. More specifically we have chosen to study why it has not been possible to rebuilt Slussen in Stockholm. To help us structure our study we have based our research on another large comparable building project, the Globen City project.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

This paper exposes the problems and challenges organizations face when integrating aged systems, web based systems and web services. The paper focuses on how people with different titles in an organization experience systems integration and the factors that contribute to project failure or success. The research methodology used in this is Grounded Theory and the resulting theory of this paper has taken form through the coding of transcribed interviews, which have gone through a constant comparing to other theories in the area of interest, mostly articles about success factors in system integration. The resulting outcome is a success model aimed to describe the underlying indicators to achieve project success.The success model consists of three factors that contribute to success in integration projects. The factors are: globalization, governance and balance.

BACKGROUND: Project based structures has become more and more common in the organizations of today. As the project based structures are given a more central role in the organizations the interdependencies between the projects are getting more attention. These structures need a new type of control to meet the unique challenges that arise. The researchthat has been done has been concentrated around the project form and the projects internal control, the area of multi-project management is therefore relatively unexplored. The few existing studies on the subject focus on projects in the construction industry why research inmore complex fields of business have been requested.PURPOSE: The purpose of this thesis is to explore and analyze how knowledge intense multi-project organizations manage their project activities, and to determine how different organizational characteristics affect the need for management control systems.METHODOLOGY: The empirical data has been collected through interviews with personnel in BT Products R&D, Gambro R&D and AstraZeneca Development.