In the last decades the continuous work for more sustainable manufacturing has become a large part of the manufacturing companies? operations. It is also well known that the factory planning shapes the manufacturing process to a great extent. Consequently it is logical to assume that the manufacturing companies? factory planning process plays a major role in the work for increased sustainability.

The purpose of our study is to interpret and understand the collaborative process around a regional model that is based on state developed guidelines for people with dementia. We have chosen to focus on the importance of interaction and have therefore interviewed participants in the project's steering committee. This group participates in efforts to develop a model for dementia care in Halland.The project work in Halland, to develop a joint model for people with dementia and their families was initiated in the spring of 2011 and is due to finish at the end of 2012. The Halland model has been named ?Annas led? and is about Anna and her husband Lars and living with dementia.

Risk management is a key competency that is constantly being researched how it can be improved within project management. The risk management process consists of four major steps: identify risks, assess the risks? significance on the project, evaluate and address the key risks and follow up.The majority of companies seem to neglect certain identified risks, and decide not to mitigate if the risk does not cause adverse effects to the business. To counteract undesirable consequences and help organisations to become more effective at managing risks an initial work has been conducted for a risk repository.The project develops a proposal on the design of a risk repository which aim to effectively support a database implementation. The study includes literature studies which resulted in a relational model for database implementation.

In today?s changing environment, creation of projects by organizations has become more common. The problem is, though, that the knowledge of the subject is still limited which causes many projects to fail. This has made it extra important to have a good project manager whocanlead the project in the right direction. While doing this both the project method and the project manager?s motivation are contributing sources.

There is a great need to reduce nutrient leaching from arable land into lakes and oceans. By using several different types of models it has previously been possible to describe nutrient losses in a catchment area with a minimum unit of sub-catchment level. At present, it is instead desirable to model a smaller catchment with an opportunity to re-connect the results to the corresponding fields in the catchment. Such models already exist but they are not fully able to properly describe Swedish conditions and land characteristics in our region.With the approach of creating such a model, SLU has developed a project with this work as its first stage. The model is expected to be created under the working name SWE-model which stands for Soil Water Environment and is in this first stage supposed to apply the SOIL model in catchment scale. During the procedure to describe the first step in the process of developing such a model adapted to Swedish conditions and which works in the catchment scale with an area of about 10-30 km2, focus has been set on calculating the transport of water flow from different hydrological response units. Regardless of the processes occurring in the soil after the water has been added, it is assumed that all the water which flows from each simulated unit is drained.In the first step the hydrologic response units were identified based on land use and soil type in the study area. With the help of a script with functions that retrieve and transform data, certain units were chosen for simulation. The script was also created in this project. Finally, the model results were aggregated and summarized for each unique unit, for each sub-catchment, and also for the whole catchment.From the results it is possible to see similarities in the flow dynamics between modeled and measured data. The efficiency coefficient has been calculated to correspond to the mean of the measured values for the whole simulation period. With an automated calibration process the model should be able to perform better. The volume error gives an indication of overestimation from the model..

This thesis project is based on a business idea where users can design their own t-shirt online. The project shows the first step in the development process where a prototype for a user interface is created and evaluated.The purpose of this thesis project is to answer the following question:How does one develop a user interface for t-shirt design with consideration to interaction design theories?In order to answer this question the design process began with scheduling the work at hand. The first step was to build a conceptual model based on specifications made prior to this project. This conceptual model became the foundation for the physical design.A high fidelity prototype was created using Macromedia Flash and Actionscript 2.0.

The goal with the project was to make the graphic for Djungeltrumman.se´s upcomingwebb-TV. Djungeltrumman.se is a clubguide on the internet and as a magazine.Their target group is people in the age between 18-34 with an interest for culture and nightlife that lives in a city where Djungeltrumman.se is active. The purpose of the project was to make a graphical frame that had the feelling ofDjungeltrumman.se. The feeling should capture the interest of the target group and make them care more for Djungeltrumman.se.The graphics will contain an intro, information frames and presentations for the different parts in the program. In this project I focused on making the intro for the program.

This project is the result of a cooperation between HalmstadUniversity and EABAB. The aim of the project was to create a macro that would help EABAB automate the process of designing steel trusses. When run in Microsoft Excel, the macro imports and processes coordinates from a calculator program. The data is then imported into the Building Information Modelling software Tekla Structures, which creates a 3D structural model of the steel truss.The macro saves much time in the project planning process and also helps minimize the risk of design flaws caused by human error. .

This master thesis is one part of a project, called ?StabSim?, with the purpose to develop a simulation model for the align and stabilisation system in main battle tank 122. The origin of this project is that it should be possible to make control analysis without risking any hardware. Besides that it will be easy to change components in order to investigate the behaviour of the system. The report includes modelling of tower and weapon mechanics and also the modelling of the synchronous motors, which control these.

Risk management is a key competency that is constantly being researched how it can be improved within project management. The risk management process consists of four major steps: identify risks, assess the risks? significance on the project, evaluate and address the key risks and follow up.The majority of companies seem to neglect certain identified risks, and decide not to mitigate if the risk does not cause adverse effects to the business. To counteract undesirable consequences and help organisations to become more effective at managing risks an initial work has been conducted for a risk repository.The project develops a proposal on the design of a risk repository which aim to effectively support a database implementation. The study includes literature studies which resulted in a relational model for database implementation.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde spring 2007, together with Jede AB in Mariestad. The report covers the development of a door to a coffee vending machine that is under construction, and will in a chronological order describe the project from ideas to final product.The project started with a rather extensive feasibility study that thru market research and user tests sorted out the opinions of potential customers, concerning today?s available assortment. Technical areas concerning materials and manufacturing methods were also scrutinized for the consideration of the possibilities of a future production.The next step was to constructively generate ideas and thoughts that later on could grow to be potential solutions. After several weeks of hard work and pieces of good advice and recommendations from the assigner, four comprehensive concepts were built up.

The intention of this essay was to describe and analyse the participant's experience in a work project based on a holistic model. The main purpose of the project was to integrate homeless people back into society. My main questions were: 1. What meaning did the project have in the participant's life? 2.

The Sitting while waiting for sustainability project goal was to make a functional model for a resting chair and to make it by using furniture and artefacts as material. A try of understanding the process of re-design and to use it to design was driving the project through. The result was a prototype made out of a bed frame and 18 pair of jeans and with details made out of leather..

This paper is a degree project on the C-level, 15 points at University West, Department of Business and IT dept. Informatics. This study is about agile methodology and its impact on IT projects. Requirements management is a process within an IT project, where customer has certain requirements that must be met by an IT system. The difference between the traditional and agile development is in the requirements management process and it can cause problems in a project.

A frequently asked question in real estate marketing is at what time of the year it is optimal to invest or sell. The aim of the project was to answer this question and to generate a prediction model over real estate located in the centre of Stockholm that takes seasons into account. With acquired sales statistics in Stockholm between 2010 and 2013 it was possible to perform a linear least square regression, also known as Ordinary Least Square (OLS), with describing qualities and season of sale as parameters. Statistical problems such as Multicollinearity and Heteroskedasticity have been taken into account when deriving the model. The result was a highly accurate prediction model indicating the profitability of investing in real estate during the summer and selling during the autumn..