To me, competing in architecture has always been slightly odd and at the same time exiting. These competitions are one of few occasions were architecture is almost like art. The competition generates a variety of ideas and projects and these are often expressed in a more appetizing and artistic way than traditional architecture. It?s also an art to master the special circumstances and requirements of a competition.

This project has revolved around finding better ways of overseeing vibrations of the gearbox at a wind power station. The gearbox has been a huge problem at the stations located at Gässlingen and the sooner the warning of an incoming breakdown is at hand the more money you can save from preparations. The work has been carried out together with Askalon AB in cooperation with consults from ÅF. Askalon is a company with a department focused on overseeing vibrations and it is in collaboration with that department the work has been carried out. During this work, new positions for the sensors and new methods of gathering and analyzing data have been worked out. This was then implemented at a wind power station to be tried out on site.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

This report is a documentation of a Master?s thesis of 20 credits performed at the educational program of Technical Product- and Production Development with Design at Halmstad University. The project is carried out in cooperation with Hafa AB in Halmstad.The purpose of this project was to bring forth a concept of a bathroom cabinet for Hafa?s new selection Young through creative design methods. The selection is supposed to attract the younger purchaser but also a target group that dare to experiment with home furnishing and appreciates new design.

This study is predominantly qualitative. It is also descriptive to a large extent and notoriented towards hypothesis-testing. The study aims at studying what has influenceddigitization of old Swedish dramatical works through the Dramawebben projekt, whilefocusing on the technical solutions. Four different data collection methods have been applied.Interviews and a questionaire with open-ended questions were the two primary tools. Adocument analysis and observations were applied as well.Examples from earlier research to relate to questions about digitization as an institutional andsocietal practice are presented.

In 2014-2015 a large-scale Ebola epidemic occurred in West Africa. The Swedish Civil Contingencies Agency was given the order to conduct the Swedish response. The purpose of this case study was to investigate the impact on project planning of the three factors: the nature of the crisis, political initiative and developing countries. In this case study the crisis was an epidemic, and the project was initiated by the Swedish Government and conducted in two developing countries. The results were intended to contribute to developed understanding and recommendations for future project managers in similar projects.

Stunning of pigs at slaughter constitutes of primarily two methods; carbon dioxide and electricity. Both methods have advantages and disadvantages from an animal welfare point of view. The purpose of this study is to compare different methods of stunning pigs from a welfare point of view. Questions included in the study are 1) What differences are there, from an animal welfare point of view, between CO2 and electricity as methods for stunning pigs? 2) What alternatives are there to the methods currently in use? 3) Which method for stunning pigs is preferable from an animal welfare point of view?This report is a literature review.

E-Series 450 is a chainsaw designed by Husqvarna AB to the semi-professional user. Husqvarna is a world leader when it comes to chainsaws, trimmers, lawn mowers and garden tractors. The problem in hand can be addressed by the question. ?How easy can we start a chainsaw? The purposehas been to provide a solution to the question above and give Husqvarna a good base of which they can continue towards a finished product.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

Under framtagandet av nya produkter måste ett antal prototyper tillverkas för att verifiera konstruktionen. För en metodingenjör som tar fram reparationsmetoder innebär prototyptillverkning att tankar som växt fram under utvecklingsfasen kan provas för första gången på en fysisk produkt. Detta sker relativt sent i produktutvecklingen och eventuella ändringar som kan uppstå på grund av att servicevänlighet inte uppnås blir mycket kostsamma. Om däremot prototypen där metoderna verifieras för första gången är digital och detta sker tidigt blir kostnaderna för eventuella ändringar avsevärt mycket mindre. Modellen som ligger till grund för metodstudierna kan sedan används för att skapa ett utkast till service litteratur, detta medför att även den delen av slutprodukten kommer att vara i fas med övriga utvecklings avdelningar. Under detta projekt har en digital prototyp av en Scania motor använts för genomförandet av metodstudier.

Background: In previous studies on the subject hope it has been revealed that hope is an important condition for the experience of health, quality of life and well-being. In the literature hope is described as a great support in life that is vital for a person's life and for how the person manages to become afflicted with a fatal disease. Within palliative care the 6S: s is a person-centered model for care that is directed towards the promotion of patient´s participation, relief from suffering and enablement of well-being and support of the patient and his or her family members. Aim: To describe how patients find hope in their situation in palliative care, and to examine whether there is an interaction between the different dimensions of 6 S: s model and with patients' experiences of hope. Methods: This degree project is literature study.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

The aim of this thesis is to examine the existence and prevalence of earnings management in Swedish companies. Theoretical frameworks often suggest that there are strong incentives to practice earnings management. The research area of earnings management has, to date, mainly focused on detecting earnings management. However, to our knowledge, no such studies have been conducted on Swedish companies. This thesis provides evidence of the existence and prevalence of earnings management in Swedish companies.

BT is a global company within the lift truck industry. The main office is located in Mjölby. In Europe all sales and service activities are carried out by fully owned sales companies. I North America, BT RAYMOND develop and distribute trucks under a different brand. For the rest of the world BT works together with a distributor network, most of them are fully independent others BT has a small ownership in.

A growing problem in Swedish herbicide free agriculture, the Canadian thistle has been the object of several new trials, seeking methods for non-chemical weed control. The new trials have mainly confirmed earlier experiences; that the most successful methods of control are springtime ploughing, repeated cutting and competition from a stout crop. Row hoeing has also been proven effective. As opposed to earlier recommendations, half season fallow has shown to be a risky and often ineffective method of control. Trials regarding biological methods have shown that above others thistle rust (Puccinia punctiformis) may have the potential of controlling Canadian thistle the future. .