The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

This thesis has been performed at Uddeholms AB with the purpose to investigate theparameters affecting the formation of inclusions during the manufacturing of a low carbonmanganese-steel.A follow-up, steel and slag sampling and evaluations in microscope have been done for a totalof five heats.The results for each heat have been evaluated in relation to the theory from the literaturesurvey and suggestions for changes in the process to reduce the amount of inclusions whichhave a negative effect on the steel quality have been given.The project extends over a large process where many parameters affect the formation ofinclusions. However, a tendency that a higher addition of alloys seems to increase the totalamount of inclusions before and after the vacuum degassing is seen.The majority of the studied inclusions seem to approach the composition of the top slag aftervacuum degassing. Ladle glaze may cause the inclusions which had a different compositioncompared to that of the slag.A high or low ladleage together with a high argon flow during vacuum degassing seems todissolve particles from the refractory which later on get trapped inside the inclusions.The floatation for two heats has been studied where a short floatation seems to give a higheramount of inclusions in casted material.In machined material so called stringers were found. The main composition of those stringerswas pure alumina. Inclusions with a composition of pure alumina were not found in the liquidsteel, thus the pure alumina inclusions must be formed during the casting.

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

I have been inspired by the Do It Yourself movement. DIY builds on the creativity of the individual, one?s capacity for initiative and one?s desire to realise one?s ideas. I have been inspired by sheets of pattern paper used in the manufacture of clothing, and my line of furniture is based on two-dimensional patterns of furniture. The sections of the pieces of furniture are printed on and relate to a standard sheet of plywood.

This project includes a small study of Västerås city's housing needs, and a proposal on theuse of the property 1:207, Lantmännens silo in the Eastern Harbour, Västerås.The project intends to produce a basic study of the useful systems for this rebuilding projectwith regards to sustainable development and energy saving light buildings.The end result, which consists of a detailed visualization of the proposal, intends to becomean iconic natural focus for the Eastern port of Västerås and an example of the use andadaptation of existing structures.The property must also link the eastern parts of Västerås with the center through anextension of Mälarleden.The work has been performed through literature studies, site visits, contacts with the City ofVästerås and by calculations.The proposal consists of architectural proposals drawings and visualizations.Furthermore, a suggestion is given of how the property can be used and fitted into theoverall plan for urban density development currently underway in the city of Västerås.Computer programs used have been Microsoft Office Excel, AutoCAD and ArchiCAD..

The goal with my project was to explore what it is that distinguishes Berlin as a city and then translate that into abstract patterns. The patterns are made for wallpaper and are presented in a book as a collection.After spending six months almost constantly abroad visiting many different citys I began to wonder what it is that makes a city unique. Sometimes it feels as though cities are reduced to the sum of their famous sights. But of course a city is more than that. It?s the people who live in it, the history, architecture and culture.

This is a project about learning from an experience, about trying to have fun and not getting overwhelmed and draining your work. The thing that wraps this whole experience together is the making of a book. The purpose of making the book has been to bring two interests together, illustration and graphic design.The content of the book for this graduation project is written by Fredrik Mårtensson. His poetry tells about the unnatural state of the modern society. I have interpreted the poetry in six abstract illustrations that I made digitally, with the intent to maintain the feeling of something organic.The process of making this book is a lot about learning what it actually takes to finish it, about trying to tell something and a lot about experience practical work..

The aim of this study has been to investigate the significance of the newly started project Vimmerbymodellen for unaccompanied young refugees. This regarding to how the unaccompanied young refugees are participating in creating networks and meeting points in the local community. Vimmerbymodellen is described as an integration project where the nonprofit sector collaborates with the municipality. The empirical material has been collected through semi-structured qualitative interviews where five unaccompanied young refugees and four involved adults have been interviewed. The empirical material from these interviews has thereafter been analyzed through the concept of social capital, identity and empowerment.The main result of this study shows that participation in the project is expected to contribute to the creation of networks and meeting points which has significance for unaccompanied young refugees.

The purpose of this paper was to examine how clients on the unit for adults at Södemalms district administration (Stockholm, Sweden) with severe mental illness and substance abuse differs from other clients with substance abuse at the baseline and at follow-up one year later. We have used a quantitative method and analyzed material from ASI-interviews performed at the adult drug abuse unit at Södermalm during the time period 2002-2010. At the baseline the clients with substance abuse and co-occurring severe mental illness have more problems than other clients, primarily in the area of mental health. They spend more time alone and are more likely to engage in illegal activities. Interviewers assess their situation as more serious and that they need more help in all of ASI's areas of life than other clients.

The project has been done in cooperation with Schenker Åkeri AB in Sweden, Halmstad. Theproject is based on an inspection made by Arbetsmiljöverket, where they found minorshortcomings with distribution of goods for the employees. The project is an investigation ofthe drivers? working environment.Schenker Logistics is one of the world's leading providers of integrated logistics services.Schenker Åkeri AB is a subsidiary to Schenker Logistics and transports 2.4 million tons ofgoods yearly.The project started with a background study to evaluate drivers working environment. Wehave studied goods receptions, the working environment, strain injury and injury mechanisms.Methods used was observations, tests, questionnaire surveys and ergonomic andbiomechanical calculations.One result of the study is a working model, which gives recommendations for the maximumweight a driver should push and pull.

During spring 2007, I Matilda Lindblom, undertook my Bachelor Degree project in Furniture Design. The supervisors were Agneta Stake at Nola in Stockholm and Leo Jóhannsson, teacher and examiner at Carl Malmsten CTD in Stockholm.The project was based on three elements:? Cooperate together with a producer for professional supervision? Learn to work from a given design brief.? To learn more about industrial production? Learn more about furniture for public areasI contacted a furniture producer called Nola AB, in Stockholm, who became my work partner during this project. The asked me to design a piece of furniture where you can sit and work with a laptop on. The target was for public areas, for example in parks, malls, or at airports.In cooperation with Nola, my ambition was to develop this piece of furniture that was the answers on their wishes and demands.

Problem The culture sector is characterized by qualitative goals which raise questions such as how do you measure culture and what is ?good? culture? Both the goals and the measurements tend to result in subjective judgments, which according to the theory make result control inefficient. Yet, result control is frequently used in the culture sector; which leads up to our research question: What characterizes the problems of result control in the culture sector?Purpose The aim of this study is to make a survey of how the Gothenburg Opera works with result control and follow-up. By defining how it tackles the different problems, which could arise with result control in a non-profit organisation, we aim to map how the problems regarding result control are characterized in the Gothenburg Opera.

This thesis examines art exhibitions, literature events and music events in public libraries in Sweden. The aim is to study which event occurs most in the libraries in Sweden. I also examine who takes responsibility for the events, who the libraries engage, how much the events cost, and how often the libraries have the events. I also study Swedish cultural politics in purpose to see if the libraries follow the aims and directions decided by the Swedish government. One aim of the Swedish culture politic is to give every citizen in Sweden the same possibility to experience culture, no matter where they live.

Kulturvårdscentrum was a project that had great significance for local folklore societies in Bohuslän.Bohusläns museum was i charge of the project that lasted from 1987 until about 2001 when most ofthe original staff have retired. The staff was mainly recruited from a large shipyard, Uddevallavarvet,at it's closure due to recession. Financing was largely made by the government to help outthose unemployed who otherwise should have a hard time finding a new job. At start there was about25 employees who where trained for one year by staff from Swedish museums, conservation studios,and teachers the university. The education was aimed at serving local folklore societies, and dealingwith their special problems.

This report is about intranets and SharePoint. It explains how user?s expectations can affect an implementation of an intranet and what companies want to get out of an intranet. It?s also about risks that may occur when an intranet is developed and how to avoid these problems.SharePoint is a collaborative platform and publishing system from Microsoft that assists developers in the implementation of an intranet.