Most people have been forced to throw away a pot-plant after its death. There are many reasons to the death of a plant, but mainly it?s because its owner forgets it, and therefore fails to water it. The purpose of this project is therefore to develop a product which can prevent this from happening, while the product has to have a low manufacturing cost to be able to compete whit other, similar, products on the market. During the project, a benchmarking has been done to give a clear picture of what the product has to compete with. The directives there are for CE-marking, and which of these who concerns the product has also been looked up.

In this bachelor thesis, diagnostic methods for one of Siemens stem inlet control valves have been developed. The work has taken place during ten weeks at Siemens Industrial Turbomachinery AB in Finspång. The company produce steam- and gas turbines and also provides service and maintenance. The purpose with this project has been to develop diagnostic methods that oversee the health of the control valves. By using the developed methods you will know when it?s time for maintenance.

A geographical position and its social, cultural and political context as well as climate and specific physical characteristics define the scope for a landscape design project. This has become clearer for us in our master project where we have made a Design Program for the outdoor environment of Wollo University in Dessie, Ethiopia and analysed and reflected on the work and process. The aim for the project has been to design an attractive and functional outdoor environment for the Campus, based on the inventories and the needs and wishes of clients and users. But, the aim has also been for us as landscape architect students to gain a greater knowledge about landscape architecture and the design process by position ourselves outside our usual context. The method has been open and seeking where the site, literature studies, dialogues with people and our own experiences from the field study in Ethiopia has influenced the work. Wollo University is situated 400 kilometers north of Addis Ababa, in a mountainous landscape. It faces problems of heavy rainfall during the summer, soil erosion, a lack of essential facilities, and is still a construction site with empty spaces in-between buildings and infrastructure.

In companies today, it is becoming more and more common for employees to work in a project based environment, as a result many companies have developed their own project models. Companies with a well developed product culture are striving to improve their existing models, and businesses relatively new in the marketplace are aiming to reach a high level of maturity as well as reach high levels of efficiency in the shortest time possible. As the number of mature and efficient companies with well developed project model increase, so does the level of competition in the market. Since a well developed project model often leads to a more efficient and accurate way of carrying out the project, which in turn leads to shorter delivery time towards the client. This is crucial as time is one of the most valuable parameters of competition in today?s business environment.

This report is a joint venture with SCA Skog AB in the Jämtland forest management area. The company is a major player in the timber market in northern Sweden, and also a large business globally with offices in over 100 countries. The purpose of the study was to find out how timber suppliers want feedback/follow-up after completion of timber business. To determine this, a questionnaire survey was sent out to 75 landowners who supplied the wood for the company during the past year. The questionnaire consisted of a total of 15 questions with the opportunity to comment on certain issues.

BACKGROUND: Project based structures has become more and more common in the organizations of today. As the project based structures are given a more central role in the organizations the interdependencies between the projects are getting more attention. These structures need a new type of control to meet the unique challenges that arise. The researchthat has been done has been concentrated around the project form and the projects internal control, the area of multi-project management is therefore relatively unexplored. The few existing studies on the subject focus on projects in the construction industry why research inmore complex fields of business have been requested.PURPOSE: The purpose of this thesis is to explore and analyze how knowledge intense multi-project organizations manage their project activities, and to determine how different organizational characteristics affect the need for management control systems.METHODOLOGY: The empirical data has been collected through interviews with personnel in BT Products R&D, Gambro R&D and AstraZeneca Development.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

Tycho Hedéns Väg in Uppsala has evolved from being a through fare passage and highwayto the oversized road frame running through the city it is today. At the present time, dueto the relocation of the E4 highway east of Uppsala, Tycho Hedéns road creates a barrierbetween the north eastern area of Uppsala and the remaining parts of the city centre. Theroad is designed to endure heavy traffic and high speed limits, generating a surrounding urbanarea were inhabitants are complied to follow the standards set for a high traffic-accessibleenvironment. Furthermore, the heavy traffic has led to the turning of both urban roadsidesaway from the actual road. The aim of this project and proposal is to show the possibilities ofhow the innate features of Tycho Hedéns road can be used more advantageously to mend thecity area of Uppsala.

The findings in this case study are mainly based on material collected during a field trip with a fellow student to Laos in February-March 2005, which was sponsored by Sida through a Minor Field Study scholarship. The original interest was to study a political aid project (Governance and Administrative Reform Project Luang Prabang, GPAR LP) in a country like Laos with very complex preconditions such as one-party polity. In Laos my interest in evaluation of political aid grew mainly because I found out that the two donors in the project, Sida and the UNDP, had reached different conclusions in their respective evaluations of the project.The main interest in this thesis has been to study how donors have evaluated a political aid project. The study shows that Sida and UNDP used, what in the literature usually is referred to as, Conventional evaluation as methodology when they conducted their evaluations of GPAR LP. The study also shows that the main reason for the different points of view that are expressed in the evaluations depend on a lack of dialogue and consensus, regarding for the project crucial concepts, rather than choice of evaluation methodology.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

This project was conducted during the spring semester 2013 at mechanical engineering program at University Halmstad. The project was conducted in collaboration with MPQ Consulting in Halmstad. MPQ Consulting is a newly established company looking to take step into the product development world. The company has already had ideas and existing products. One of the ideas is to construct and design a form of beach games whose rules are based on the volleyball rules.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

External Thoughts is a studio based project with its purpose to throughworkshops establish contacts and create a dialouge about the content of contemporarygraphic design. The project also aims to apply a design curaticalmethod where the designer is both client and contractor, client and designer.We also wanted to investigate the design content as open-source and examinethe school versus the Internet?s future role in the design and for thedesigner. The project is a collaboration with Rasmus Östgård Ohlson fromBeckmans..

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.