The Hunter?s Bend project is about how our personal possessions affect our perceived identity and in what way the value of an object may increase with the relationship that is built up towards the user. I have looked upon traces of time as an extension of an existing object. The outcome is a series of leather cases made out of one piece of folded leather, hardened and locked within itself. The history contained in leather, as a living material has been an important part of the project as well as how its features are used in the making and then allowing the product to change after use..

The agricultural sector has historically seen stable prices and a relatively constant demand for its products. Companies within the sector have generally had few loans and large sums of money tied in assets. The profitability of the companies has on the other hand been low. Together these circumstances have determined the creditors? demands on the companies within the sector and have formed the rules and regulations that exist today.

The goal with the project was to make the graphic for Djungeltrumman.se´s upcomingwebb-TV. Djungeltrumman.se is a clubguide on the internet and as a magazine.Their target group is people in the age between 18-34 with an interest for culture and nightlife that lives in a city where Djungeltrumman.se is active. The purpose of the project was to make a graphical frame that had the feelling ofDjungeltrumman.se. The feeling should capture the interest of the target group and make them care more for Djungeltrumman.se.The graphics will contain an intro, information frames and presentations for the different parts in the program. In this project I focused on making the intro for the program.

This diploma work project is a product development project which purpose is to redesign a braking system for a walking frame. The system that was developed diverges the force from the user to braking power, and includes a service brake as well as a parking brake. The most important components of the system are a grip handle on where the user holds on to and a braking handle on which the user operates the brake from. The system also includes a power transmission component, braking package and other mechanical components. All of the components wasn?t developed in this project, several off them has been reused from the existing system.This product has been developed to meet the requirements and standards presented from the principal, Ahlberg Leber.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

There have been several projects with solar installations in Sweden, and Sala-Heby Energi (SHE) wanted to create a solar plant. The question answered in this thesis is whether it is economically viable to create such a source of sustainable, renewable energy. The plant would be built with the help of the financial effort from 120 customers. This economic union would sell the electricity to the SHE, for SEK 4.50 per kWh up to a certain level over a period of 10 years. It would be a long term commitment to environmentally friendly electricity, using solar cells which convert sunlight directly into electricity.In year 2009 there was introduced a new state aid for photovoltaic systems, to create an increased and continuing interest in solar cells.

This Master thesis focuses on change conditions and change ambitions in Swedish public libraries. I have chosen to focus on three libraries that participated in a much-debated developmental project sponsored by the Swedish Arts Council almost twenty years ago. The aim of the project was to enhance service-quality, increase user-influence over media acquisition and library routines, and to redefine the concept of quality in the library context. I have made comparisons of the conditions and change ambitions between the project period 1991-1994 and present day 2009. To do this I have analyzed the evaluations of the above-mentioned project and the developmental plans that every municipality in Sweden is required to write according the library-law of 2004.

In industries today the demand for reading the state of industrial equipment and thus prevent machine breakdown, is increasing. The company HMS Industrial Networks AB has a product on the market, Netbiter EC350 that is used to read sensors and thus find out the condition of industrial equipment. By reporting scanned data to users through a cloud service, users can keep track of their equipment. When developing Netbiter EC350 a slot was made for a Bluetooth module to offer clients a wireless reading in future developments. In this project a prototype was made to show how this Bluetooth communication can be implemented. The goal of the project was to create a Bluetooth communication between a Bluetooth sensor and Netbiter EC350. A user interface was made to allow the user to read sensor values. The result of the project shows how a Bluetooth communication can be implemented to read sensors wireless and therefore it fulfills its purpose and goal.

I contacted the production company Salmonfox in the hope that they would have any projects that they needed help with. It showed that Salmonfox just started up an old project that they needed to complete. They wanted my help to edit some trailers and one crowdfundingfilm for the short film called, Captain Sweden (Kapten Sverige). Salmonfox are hopefully going to use the different trailers and crowdfundingfilm to promote the short film and get help with the funding to make a feature. The project began with a pilot study in which I made a time plan and a requirements plan, where the different requirements were set.

In order to facilitate testing of anesthesia machines a patient simulator has been required by Maquet Critical Care AB. A patient simulator has been developed to reduce expensive and time consuming animal experiments and temporary lab arrangements. The patient simulator has been developed and designed to simulate human lungs with regards to anesthetic uptake, production of carbon dioxide and heating and moisturizing exhaled air.The system comprises a container and a test lung to simulate the volume and the dynamic of the human lung. The simulation of uptake of anesthetics has been implemented by pumping a fraction of the gas from the container through a bypass circuit with an active charcoal filter that adsorbs volatile anesthetics. The flow through the bypass circuit is generated by a pump and is controlled by a linear valve.The resulting performance of the patient simulator has fulfilled the requirements.

This project measures the upper bound of exposure time for laser reflection detection in the software DotDetector. Via measurement of the exposure time for which distortion happens in a room lit with everyday light we conclude that the upper bound for exposure times are 100 milliseconds. This value does not change as long as the lighting in the room is the same. As future work this project proposes variable upper bounds depending on secondary lighting in the room. Also we propose automating the colour masking of the detection algorithm..

Atlas Copco Tools is a world leading company in tool manufacturing. The productionin Tierp works hard to improve their assembly to maintain its position. This thesis isa part of their improvement efforts to be a more Lean production.The main focus for this thesis was to identify the material flow in the kanban system,which used to supply the assembly groups, focusing on the material flow to assemblygroup 9 and the assembly group 3. Group 3's material flow within the kanban systemwas perceived to perform better than the group 9. The handling of kanban materialand their working methods in the two groups was identify those differences whichaffected the kanban system.As an alternative material supply a study were done in kiting.

Logistics is an important concept in the organizational context in which the planning of flows, services and products are treated. Logistics handles supplier management, supply of materials, production and distribution. The distribution of goods can be managed with different types of transportation depending on price and time aspects. The lowest transport cost for larger amount of goods is by maritime shipping. A common carrier used in transportation of goods is a standardized ISO- container.

Requirements management is an important part of the software development process. The success of a project may depend on how this is handled. Even though several research studies indicates that more attention should be paid on non-functional requirements, the primary focus in practical projects still regards identifying functional requirements. Especially the prioritization of the non-functional requirements has been proven to be of great importance for the success of a project.This report investigates basics in agile requirements management involving opinions from experts from a software development company. This is done with help of existing literature and interviews with key actors involved in prioritization at the company.

This is a qualitative study with a reflexive approach. The aim of this masters thesis is to describe how the internal information is managed in Borås Theatre and Borås Public Library related to the internal flow of information within the organisations according to descriptions of different units, staff and work tasks. Ten qualitative semi-structured interviews with employees at the Theatre and the Library have been conducted. The organisations have been studied separately. The interviews are presented according to six categories presented in the theory chapter as a result of the study.