This thesis examines the multiplatform design issues of a development project using agile project methods and how they were resolved. Data was gathered through observation, photography and keeping of a journal using action research as a methodological framework. The thesis is concluded with recommendations on how to deal with these issues in similar projects under similar conditions..

In the year of 2009 the conditions for managing primary healthcare in the region of Västra Götalandchanged. The decision was taken by the regional assembly and resulted in that the citizens since thenhave had the opportunity to choose which health care provider they preferto stay with. Along with thisdecision a new market for private health careproviders was established, which resulted inincreasedcompetition between the providers.In order to manage the competition, the health care providers arenow forced to be more efficient in their operations andalso to beeven more focused on their patients.Backa Läkarhusgruppen is an example of a private healthcare provider in the region of Västra Götaland.In the same way it is also an example of anorganizationin need of analysing their operations to seehowit can be further optimized to meet patient needs and expectations.The aim of this study is to analyse Backa Läkarhusgruppen?s organization and its operationsin the hopeoffinding suggestions whichwill improve the patient flow.To allocate and solve the problems thatBacka Läkarhus suffer from,an approach inspired by Lean Healthcare is used throughout the report.Some of themost significant problems that were identified within the organization are:?The synchronization of demand and capacity is inadequate.?Absence of standardized routines.?Absence of present leadership.To be able to improve the patient flow Backa Läkarhus needs to handle these identified problem areas.By synchronizing the staffing level in relation to the trends in demand a reduction in the patient?swaiting times and throughput time will be possible. Creating clear responsibilities and routines for thestaff will contribute to a higher degree of patient focus and thus lead to a more efficient patient flow.

ITT Flygt is a world leading company that mainly manufactures submersible pumps. A problem of ITT Flygt is that product development projects rarely manage to hold the estimated project time. It shows that something unexpected occurs in projects quite often, which results in delays. The delays can both be due to an optimistic time plan of projects and risks in product development projects which are not discovered at an early stage. This added with unforeseen delays makes it difficult for ITT Flygt to estimate the duration of their projects.The goal with the Master thesis is to examine a suitable method for simulation of project time.

In the last decades, lean production has proven to be one of the most important organizational paradigms in manufacturing. The lean concept has also spread into the service industry where it is applied within a range of different areas. The wide applicability of lean principles has spurred the authors of this study to apply the principles in the context of the operations of a Swedish remand prison. The thesis examines the process a client of the remand prison Häktet Kronoberg goes through from the time of arrest until he/she is released or convicted and transferred to jail. Based on lean tools and principles, the thesis maps and analyses this process.

This thesis, in the field of healthcare logistics, has been carried out at Hjärt- och Medicincentrum (HMC) at the University Hospital in Linköping during the fall and spring of 2012/2013. The thesis is done by two students at Linköping University at master?s level within the framework of Industrial Engineering and Management.As Sweden's county councils should not make a profit or loss, it is important that the councils are aware of how much care processes cost. Kardiologiska kliniken at HMC in Östergötland?s county council is one of the clinics that are profitable.

The purpose of this project is to study Partab's material distribution process, furthermore identify critical problem areas within the company. Further the aim is to provide suggestions to new work procedures regarding material distribution and related processes. Appropriate literature has been used as a support in this process. The main goal of a commercial company is to generate cash flow, and maximize the return on investment. Streamlining material supply and the use of material is a part of this process. Virum and Persson define logistics as: "Logistics is the approach and principles founding the process of planning, development, coordination, organisation, management, and control of material distribution from supplier to user".

The project was carried out in cooperation with the department of product development IOS at IKEA. The work included improvements of a new existing product that Ikea soon will release on the market, Observatör, a wall bracket for flat screens. The product is supposed to fulfil the needs within this market for IKEA. However, since Ikea was not satisfied with it, our work was to carry out the improvements that were specified in the beginning of the project. Another task in the project was to develop a side-product that is supposed to be used together with Obeservatör for storage of DVD/decoders.The project included labour as problem definition to final technical drawings and a prototype.

A district heating plant has the advantage that it can take advantage of the waste heat from industries and use of cheap fuels to produce heat. But for the long term is competitive requires that energy is also saved in district heating plants. One way to save energy in a district heating system is to increasing cooling to the return temperature. This leads to less power needed to drive the distribution pumps,  and that more energy could be extracted from the same amount of fuel by an improved flue gas condensation.In Karlskoga the return temperature into the district heating plant is high. They would therefore reduce the return temperature in order to extract more energy from the flue gases.

In today's society there is a significant focus on energy efficiency. Despite this, people leave lamps, televisions and computer screens etc. powered on unnecessarily. The goal of this project is to build a simple prototype for home automation where a user, via an application on a mobile phone, can switch on and off the power of an electrical products in the home and as well as being able to check whether such products are switched on or off. The prototype will also collect data on power consumption for these electrical products.

Logistics planning for a construction site is usually limited by traffic flow to and from the workplace. The geographical location of the construction site is determined by roads around the workplace and opportunities for well-functioning logistics. Inventory of material is often impossible because of the frequently small workspaces. As a result, a concern relating material handling remains . Even before the establishment of a construction site, it is required in the construction industry to eliminate errors that might arise in the planning stage.

I love contrasts and meetings between people. Situations where individual differences are highlighted, affected and shaped by each other.In this project I have been working with five characters: the aggressive one, the frightened one, the social one, the reserved one and the proud one. By analyzing the characters I have tried to understand how they are able to meet and agree with each other. The goal has been to create a place where this can happen, but which is also adapted for each respective character.The project is based on a field study I did in the summer of 2013, when I lived in a masai village in the northern part of Tanzania. Nescar is the name of a masai women I got to know, is means The one that you can trust.

The purpose of this paper was to analyse ?Identity- about trademarks, signs and symbols?. The project was a co-operation between the National museum of Art and Stockholm School of Economics in the spring of 2002, which consisted of an exhibition, a book and a series of seminars. The goal was to illustrate how the trademark had developed through history, which role it has in the modern society and how the trademark serves as a creator of identities. The project, mostly the exhibition, was exposed to criticism, which was directed towards the sponsorship deals between The National Museum of Art and five companies..

This thesis deals with an iterative user-centered IT-development project in a bank setting. The aim is to present a solution for deployment of future Internet banking for small businesses. The project features a design of IT-related concepts and ideas with a strong emphasis on scenario-based design and the usage of patterns as a documentation tool.The project plan featured an iterative framework and was carried out by a group of designers in collaboration with a reference group representing the future users of the system. This group consisted of company managers and bank employees, all from the small town of Åtvidaberg in Sweden.The method used in the development process was Scrum. A total of three sprints were completed with user meetings at the end of every sprint.

BackgroundToday a common approach to solve a complicated problem is to assemble a temporary workforce in order to solve the problem by working together within a project. One of the difficulties with working in projects is to maintain the planned budget. Working hours and costs are often exceeded. Many companies presume that any certain project will succeed, a presumption that leads companies not to anticipate risks involved in a project. In companies today there is seldom time for evaluation or moderation of a project, in order to have time for evaluation there is a great need for an adequate planning of the project.IntentThe intention with this study is to create a model for planning, budgeting and evaluation of projects within consultancy companies.MethodWith the help of interviews and discussions within the group Hamnar och Byggkonstruktioner at Sweco has evidence to present a proposal on planning, budgeting and monitoring been developed.ResultsA model has been developed to ease for consultancy companies to plan, budget, monitor and evaluate projects.

Projects is the most common work model within the cultural area, but what is a cultural project? The definition of cultural projects is ambiguous. There are also no compiled information about what it means for culture to be pursued in project form. Scientific research about traditional project management and success criterias are wide-ranging. So is the scientific research about cultural studies and cultural policy.