The purpose of this bachelor thesis is to examine the similarities and differences between best practice literature regarding digitization and an existing cultural heritage digitization project. It also aims to determine whether this literature is of any help during an actual project of digitization. These results were achieved by examining literature regarding best practices in digitization and analyzing how well an actual project correlates to this advice. The information about the Digidaily project was obtained through two qualitative interviews as well as the project blog. The outcome of our research showed that although there are a great many similarities between theory and practice, the project in question was not helped by literature.

The purpose with this project is to evaluate which of today?s technologies for creating web applications is the most suitable to use when constructing web portals. From a great amount of different technologies, five of the most widespread and well known technologies have been chosen and closely examined on nine different web portal specific criteria. The result from this evaluation is a table where all the grades for each technology is displayed. With the help of this table, it is possible to get an idea about what technology is the most suitable to use when constructing a specific web portal.

NorFor is a cooperative project between the consulting organisations owned by the farmers in the Nordic countries ? Sweden, Norway, Denmark and Iceland. The project started in 2001 and the outcome, the system for ration calculation NorFor Plan and the model for evaluating the ration NorFor Evaluation, was completed in 2006. Along with NorFor Plan economical optimization are available and according to literature, the optimization will generate a 2 öre lower feed cost per kg milk, and thereby improve the profit for the farmer. The use of NorFor Plan in Sweden for feed optimization during spring 2008 has been very small. In this study eight herds in the middle of Sweden fed half the herd according to the classical system used in Sweden and the other half according to NorFor Plan system.

In the fall of 2014 a literature review and a scientific study of the topic; "... in the extent to which companies in the industry applies the evaluation of continuous improvement? was conducted at Mälardalen University. These studies are the foundation of this thesis.A strategic improvement is often divided into smaller steps of improvements at each hierarchical level from the top down through the organization. But if there is no response system that can confirm the results of these improvements back through the organization it is very hard to see if the improvements really are improvements or just changes and a waste of resources.

The project has been done in cooperation with Schenker Åkeri AB in Sweden, Halmstad. Theproject is based on an inspection made by Arbetsmiljöverket, where they found minorshortcomings with distribution of goods for the employees. The project is an investigation ofthe drivers? working environment.Schenker Logistics is one of the world's leading providers of integrated logistics services.Schenker Åkeri AB is a subsidiary to Schenker Logistics and transports 2.4 million tons ofgoods yearly.The project started with a background study to evaluate drivers working environment. Wehave studied goods receptions, the working environment, strain injury and injury mechanisms.Methods used was observations, tests, questionnaire surveys and ergonomic andbiomechanical calculations.One result of the study is a working model, which gives recommendations for the maximumweight a driver should push and pull.

This master thesis investigates quality procedures and measuring of solid carbide end mills, with the main focus on measuring equipment. The thesis has been written in collaboration with a special production department for solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

The paper is a research of"The Library project", a three-year collaboration project betweenArbetarnas Bildningsforbund, Studieförbundet Vuxenskolan, Sveriges Författarförbund and public libraries at 14 places in Sweden.The goal of the project is to find new forms for collaboration between libraries, authors and organisations for adult eduacation under the motto "two branches of the same education tree".The purpose of this research is to make a close description of the project and also look at the goals anf purposes of the different actors in the project. The main thought is that the different goals and purposes have caused at least some of the problems in the project..

In todays society the demand on companies to deliver better project management is crucial for them to survive. The higher demands from clients make older project management weak and unreliable. In the constructions sector more and more companies are created and the competition is higher than ever. The clients are aware of the higher competition in the construction sector. This has resulted that construction companies must now make their project management more efficient to create better projects and better relationship with clients. The purpose of this thesis arose from this problem in the construction sector.

The author contacted designers Claesson Koivisto Rune Arkitektkontor in August 2007regarding his Master thesis at KTH. The company had discussed the possibility of creating achair made from molded pulp. The author was taken on as a manager for the project. Theobjective was to produce design documentation for a paper pulp chair which was to belaunched at the in 2008 Milan Furniture Fair. The purpose of the thesis was to develop aproduct with scientific methods as well as to investigate how to make collaboration betweendesigners and engineers easier through communication.The project went through four basic stages: Information, Analysis, Synthesis and Evaluation.Information on paper pulp, molded pulp, chair design, sitting postures and the existingmarket of molded pulp furniture.

Today, activities funded with public funds needs to present relevant and reliable information which shows the results obtained. Requirements increase in welfare activities to be run based on scientific, empirical knowledge. This applies particularly to social work. The social work is, however, poorly researched in areas such as knowledge of interventions in the content, context and effects. One way to evidence-base social work can be to conduct regular and qualified assessments.

This thesis is an attempt to study if the school cinema project in Kungsbacka is an establishedactivity. Qualitative interviews have been performed with the cinema owner, the projectleader and a politician of the municipality, about their views on the project. Teachers andpupils have also been interviewed. In the case of an established activity, the thesis also attemptsto answer what causes have contributed to such an establishment.The study shows that the school cinema project is an established activity in Kungsbacka andthat all parties involved are satisfied with it. The project has guaranteed the cinema's existence.According to the thesis, the reasons for the establishment are that govemment funds enabiedthe project to initiate.

The project, Flexible Snowboard System, has been carried out by the project group independently and is a module developed for snowboarders, ski rentals and ski schools. The problems of today?s solutions are that they cause the user an inconvenient standing position when riding the ski lift or skating the transportation slope, also mounting, adjustments and disassembling of the bindings are time consuming and brings undesired wear to the screws and screw holes. In addition any adjustments require that the user steps out of the bindings and have tools at hand. Flexible Snowboard System is a universal module which means that it can be assembled with all of today?s snowboards and bindings.

This project aims at investigating if the use of UML as a support to small-scale development ofan embedded system is relevant. The investigation is conducted by using UML during the initialphase of the development ofTelfafill, a filling machine by the company ?Telfafill AB?. The aimof the development of Telfafill is to separate the user interface from the control unit. In additionto this main objective, Telfafill AB would like possible changes to, and additions of,functionality of the filling machine to be investigated.Within the boundaries of this project, the development of Telfafill reached a full requirementspecification of the proposed system, and contact was made with potential external developers.No prototype construction had been started when the project ended.

A product and design development of a household device which shall dry food waste has beencarried out in collaboration with Smedlund Miljösystem AB.This project has been implemented through several brainstorms and a questionnaire study.A great insight of how it is to work in a project in real work life has this project been givenme. This is a slightly less straight road to a conclusion than in the academic world that I amused to..

The work is performed at Forsmark Group AB as a final step in the Bachelor ofScience program in nuclear engineering at the University of Uppsala in 2013.The work is part of an ongoing process of streamlining project system model FKA.Streamlining the project model is an important aspect that affects all largecompanies that somehow have a project governing body when there is muchfinancial resources to save. Although the quality of the projects is positivelyaffected by efficiencyThe aim is to find possible common weaknesses and strengths of the project systemby interviewing a number of project managers, and using the systems in placeexamine the model.As part of the work also includes examining what project managers have to adjust tothe newly implemented system VPMM, and other newly introduced elements thathave been added to improve the efficiency in the futureProject System is a complex system that is influenced by many different parametersand participating individuals' attitude and personality. But then small changes in themodel could have major economic consequences.The thesis has generated results that show common weaknesses among the variousprojects and their project managers' general opinions about the project model. It alsopresents some possible solutions based on own thoughts and those interviewedobjects suggestions and comments..