The essay's aim was to see which attitudes county council's and municipality representatives had about themes like: collaboration and competence in the work around double diagnosed persons. Its objective was to zero in on the attitudes of the representatives regarding a coallocated collaboration project in Stockholm. Also, it sought to find out what attitudes the representatives had about the other representatives attitudes concerning the above mentioned themes. A number of attitudes were presented during the qualitative interviews with the representatives, highlighting which attitudes seemed strongest. Then the interviews were analyzed using meaning condensation and then set against the theory of social representations.The analysis showed that before work with the target group starts, there?s a need for synchronization of the different representatives involved in the collaboration project.

This project has been about making a design suggestion for a boat accessory that adjuststhe distance between a sail-or motorboat and the dinghy, which is connected by a rope inthe stern. Today this is all done by hand and can lead to problems when it comes tostressful situations such as harbors and narrow passages.A company called Sailsafe came up with the idea and the construction, which they alsohave tested. I found them through an acquaintance at Dacat AB where I did an internshipin the fall of 2010.Using sketching as the primary tool I?ve worked in an almost-real design project with theaim to develop my skills and give the company a relevant design suggestion. Dacat thenhelped me with a 3d model in Alias, which was printed in 3d and painted in thepaintworkshop at school..

The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.

The purpose of this Master thesis is to investigate issues concerning the role of the public librarian and their work with adult learners. This is done by examining Studiebibliotek Halland, a project initiated and financed by Kulturrådet, with the aim of improving for adult learners to use the public libraries in Halland. The major questions raised in this study are: How do the librarians interviewed experience their role as public librarian since the number of adult learners at the public library has increased? In what way do the librarians think they have to change their work in order to meet the demands of the adult learners? How do they feel about the change? Do they think their work will change more as a result of the project? Data was collected through interviews and the study is a qualitative study. The main results are that the librarians have a very positive attitude towards adult learners using the public library.

The aim of this examination project was to work with the processof making a pattern collection for fabrics. The collectionshould consist of at least three patterns with report measurementssuitable for screen print. I wanted the pattern collectionto be a simple, mystic and colourful collection with a folklorespirit like the popular rural life I experienced during my childhood.The purpose of the project was that I during the working processwould deepen my estethic background to enforce my personalgraphic expression ability and evolve as a pattern designer.I wanted to try to mix my personal view of domestic graphicexpression with another language that I gained in recent years.This I wanted to do in order to find the tools that could helpme clarify and develop my pattern signature.A few of the questions that I had about this project were if thelong scetching phase that I planned would help or damage theproject.I also thought it would be interesting to experiment with coloursin this project. I wanted to see how far I dared to go inmatter of colours as well as how the patterns would be visuallyexperienced if I for example reduced one colour or replaced itwith the opposite colour.I thought it was inspiring to work with traditional techniqueswith the colours. It was only positive that part of the patternstory telling was developed in an unpredicted direction duringthe scetching phase.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

The degree project has been implemented abroad in Brisbane, Australia. A literature study has beenperformed parallel to the practical work within the subject »Corporate identity through graphicaldesign«. In this study deeper research has been made concerning the establishment and manifestationof a corporate identity and its program. The knowledge given from this study has been put into practicethrough two larger projects.The first project was carried out at De Pasquale, advertising agency in Brisbane, where a corporateidentity program was designed for a new company. The company is a fitness centre, called KnockoutFitness, which specializes in different types of boxing training sessions such as Boxing, Thai Bow andBoxercise but also Aqua aerobics.

A growing issue in the construction industry is how production can become moreefficient by using logistical solutions. Companies can minimize the cost of a project byreducing the time to perform the work.The purpose of this report was to examine the logistics related to pipe trenches forSIAAB. The report's focus has been on solving problems and planning that wouldfacilitate the work of the project Vaksala-Lunda Etapp 3.The case study consists of interviews with SIAAB's employees and an observationwhere the progress of a traditional pipe trench has been documented using checklists.Questions to the report?s case study come from the theoretical part, which is basedon literature on construction management and logistics in general. The observationlasted five weeks and the biggest time-consuming events that affected the pipe trenchduring this time, has received most attention.

Title: The appraiser?s choice of valuation method ? factors that influences the choice of company valuation methodsSeminar date: 04/06/07Course: Master thesis in Business Administration, 10 Swedish credits.Authors: Anne Benedicks and Veronica ÖbergAdvisor: Eron OxingProfession of category: Financial analysts, auditors and company lawyers.Key words: Company valuation, valuation methods, cash flow analysis, comparative valuation, the net asset value method.The Main Issue: What is of decisive importance when choosing a special company valuation method?Purpose: The purpose of this paper is to identify, analyse and evaluate the most common methods of valuation for financial analysts, auditors and company lawyers and those factors that influences the choice of method.Method: A multiple survey has been implemented for the actual profession categories. Primary data was collected through semi-structured interviews and a questionnaire survey.Theoretical: The theoretical frame of reference is based upon the paper?s dependent variable, i.e. the role of the appraiser.

Altmetrics, a subfield of informetrics, is still in development. The aim of this thesis is to explore; the significance altmetrics may have in the LIS field, and to define the new perspectives altmetrics offer in comparison to traditional metrics. The research questions are:- How can altmetrics affect research assessment?- How does altmetrics position itself towards traditional metrics?- How could altmetrics influence the LIS field?A qualitative content analysis was used as a method. The analysis of a sample of ten peer reviewed articles was based on a coding scheme with eleven codes.

AbstractOur bachelor degree thesis was carried out in collaboration with Ivar Petterssons Järnmanufaktur AB in Smålandsstenar. We were asked to replace their wedge housing, used to fasten the wires to the power lines, with a similar structure in a plastic material. The idea for this project started with Ivar Petterssons Järnmanufaktur AB having problems with the casting quality that forced them to perform expensive tests on each of the wedge houses to ensure the quality. They are currently produced in China which is also a major drawback because it requires expensive long delivery times.The method we used is Fredy Olsson's Princip- and Primärkonstuktion (1995). We have consistently been in the project on so-called "broad front", which means that you create several sketches, ideas and changes in parallel, and then evaluates all.

There are plenty of exciting changes being developed in Tre Högar´s Park, which is located in the district of Linero, eastern Lund. A project group representing Linero If, Lugi Tennis and Linero/Östra Torn Health centre, has been created and is responsible for managing a development project of the Park. Their main focus is to create sports, exercise, health-promotion, health-care, recreation and rehabilitation facilities. They view the park area as having great potential and will transform it into a purpose built park for Health and Exercise. There are various authorities involved with and engaged in the scheme; aside from the project group, the municipality of Lund, The sport association of the handicapped and local schools are being consulted.

In this report focus is put on the combustion process at a cement plant. Combustion is the heart of the cement making process and absolutely crucial to have under full control and well optimized. The fuel is put into the process through a burner pipe and this burner pipe is modified to reach a more efficient combustion. The primary target is to enable burning of heterogeneous alternative fuels and increase the production level. Other positive effects from this type of optimization is lowered specific fuel consumption and lowered CO2 emissions. A redundant burner is chosen for the project and overall the project steps are the following: 1. Installing a Jet air nozzle ring in a way so it can move both axially and radially due to temperature changes. 2.

This degree project focuses on the importance of being professional doing a job at the same time as being able to express one self in a professional way. The degree project also focuses on how the work as an environmental- and health inspector could be made easier by making the inspectors aware of their language and open to change. Finally the focus of this degree project lies on how positive contacts can be made with people despite them being informed of difficult or unwanted things.In order to get an overview of the inspectors? communication skills today the environmental- and health inspectors at the environment office in Laholm´s municipality were evaluated. The inspectors´ communications styles and languages were checked on the basis of the ?nonviolent communication model? by Marshall Rosenberg.The content and the result of this report were presented for the head of the environment office, the chairman of the committee and the participating inspectors in Laholm´s municipality.

Chronic illness is associated with conditions that may result in psychological ill-health in the adolescence. Consequently there is a need for development of preventive psychosocial support interventions for this target group. The objective was to develop, implement, and evaluate the effect of supportive intervention group program for teenagers suffering from chronic illness - aiming at increasing quality of life and supporting mental and physical health. Method: Six different intervention groups were conducted between 2007 and 2011, age 13?17.