The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Process standardization is a topic that has generated a lot of research and literature. At first, the focus was on production; today processes are used in all different kind of business areas.The aim of this study has been to analyze how processes can be applied on development businesses and how IT systems affect the result of the process. To accomplish this, we have asked questions such as what standardization is in a development process? Why are the processes standardized? What difficulties can appear with standardization? And how the IT-systems affect the result of the process?To answer these questions, we have preformed a case study on Saab. Saab is a well know Swedish company who are working with a project called the GMS-project, where they develop processes to cover the whole company´s business areas.The literature gives the reader an understanding of processes and standardization.

This report aims to describing the work behind the development of a masonry heater.The masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

BACKGROUND: Project based structures has become more and more common in the organizations of today. As the project based structures are given a more central role in the organizations the interdependencies between the projects are getting more attention. These structures need a new type of control to meet the unique challenges that arise. The researchthat has been done has been concentrated around the project form and the projects internal control, the area of multi-project management is therefore relatively unexplored. The few existing studies on the subject focus on projects in the construction industry why research inmore complex fields of business have been requested.PURPOSE: The purpose of this thesis is to explore and analyze how knowledge intense multi-project organizations manage their project activities, and to determine how different organizational characteristics affect the need for management control systems.METHODOLOGY: The empirical data has been collected through interviews with personnel in BT Products R&D, Gambro R&D and AstraZeneca Development.

The project Easy Battery Handling - EBH has been carried out in our auspicial and completedfor Devantini Corporation, a development company in Halmstad with its main concern inenvironmental friendly innovations.EBH has solved one of many technical challenges in one of Devantini corporation?s largerprojects. This main project involves the development of an electric powered formula racingcar. The part of this car that involved EBH was the battery handling to guarantee safe andquick battery exchanges during pit-stops.The solution became an entire battery module, hanging on the side of the car on two spearspointing out from the car. The batteries are exchanged by a specially designed trolley that isinserted under the battery module.

AbstractThe concept project is today used in several contexts and has different meaning in different contexts. Lately, projects have been seen as a form of organization and more companies convert from traditional organizing to organizing in a project form. The purpose and focus of today?s project is not only to increase quality and competence development for management but also to integrate different actors in order to e.g. increase customer value.LänsTeknikCentrum AB (LTC) in Jönköping is running different projects in order to support companies in Jönköping County.

This report describes a project carried out in cooperation with Klippan Safety AB. The purpose of this project has been to develop a product that facilitates the living area in a truck cabin for the customers. To be able to develop, in a structured way, that kind of product, the project has been based on different product development theories. The project contained of following parts: marketing research, product generation, product evaluation and prototyping. After information from the marketing research and discussions with the company, the decision was made that the task was going to consist an improvement of the existing product referred to as 'the comfort module'.

Abstract Tutor - Anders Richtnér History - Theories suggest that Lean Product Development strategies dramatically increase a company's performance through enabling faster T-T-M, Quality and Costs of Product Development. Purpose - The purpose of this paper is therefore to investigate whether the implementation of LPD actually affect corporate performance measurements T-T-M, Quality and Cost, in a positive way. Methodology - This Bachelor thesis is an exploratory investigation of the concept of Lean Product Development within a global IT- company, performed through four case studies, interviews and complementing corporate performance data. Findings - With empirical data and subsequent analyzes in mind, we note the following; it is clear that the project that produced the best results, in terms of T-T-M, Quality and Cost, also was the one furthest in the process of implementing Lean Product Development..

In 2014-2015 a large-scale Ebola epidemic occurred in West Africa. The Swedish Civil Contingencies Agency was given the order to conduct the Swedish response. The purpose of this case study was to investigate the impact on project planning of the three factors: the nature of the crisis, political initiative and developing countries. In this case study the crisis was an epidemic, and the project was initiated by the Swedish Government and conducted in two developing countries. The results were intended to contribute to developed understanding and recommendations for future project managers in similar projects.

Agile systems development has in recent years become very popular, and many companies today claims to be working agile. At the same time there are studies about agile system development that indicate that there are difficulties in fully adopting the agile way. The purpose of this qualitative study has been to examine how true Swedish IT-companies conduct their agile system development compared to agile theory, and we have specifically for the purpose of the study designed a framework that has been used as an analytical tool. The framework helped us to maintain a structured and objective approach when we examined the participating companies and their practices. The study showed that there were differences regarding how true to agile theory the different companies conducts their agile projects, and that the differences in part depends on how long the companies have been working agile.

Large-scale land investments is not a new phenomenon, but increasing prices on food and agrofuels have inflated prices on land and has led to an enhanced interest in landinvestments from a range of different actors. The ProSavana project in the Nacala corridor in the Nampula province, northern Mozambique is a large-scale land investment with the purpose of establishing intensive commercial agriculture and is planned to be implemented this year (2013). The project is financed by Brazil and Japan in collaboration with the government of Mozambique. It is not quite clear how large-scale land investments affect the areas they are implemented in and how they can affect the possibilities for sustainable development in these areas. Both opportunities and problems can be observed within the social, economic and ecological dimensions of sustainable development.

This study is about an ongoing project in the northern parts of Sweden. Quattro Helix is used as a model for the interaction between four institutional members of the society, in purpose of challenging existing social structures and achieveing community development. The aim is to increase the knowledge about Quattro Helix-model as an approaching method to face the problems in the society through cooperation between Civil society, state, academy and industry. Interviews with eight project members were used as the data-collecting method to capture the perceptions about the project constellations. Information was gathered from two representatives from each of the four actors.

My work deals with large scale design of the urban fringe. The thesis is divided in three parts; ?Current viewpoints?, ?Infra City ? conditions ? and ?Infra City ? project?. In the first part, I go through the history of trade shortly. Then I discuss the concept of nature, which ends up in a linkage between natural science and aesthetics in landscape architecture. The link between those two makes a project stronger and more multifunctional. The object of my case, Infra City, is a mall situated north of Stockholm on both sides of the E4 motorway going to Arlanda airport.

The primary purpose of this degree project was to investigate teachers conceptions about education for sustainable development and their education within the area. Teachers from Sweden and California have taken part and one of the aims with this study was to look if any differences could be found depending on what country the teachers came from. Therefore, this study has used a qualitative approach where conception maps and interviews have been used to get a result. Furthermore, the result showed that none of the differences that was found can be linked to the participants home country. The study also showed that several of different teaching traditions and educations philosophies was represented.