This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

Bachelor thesis, Trolley Innovation Project, has been unique in the sense that it has been carried out over the borders of Sweden. Iacobucci S.p.A, located outside of Rome in Italy is one of the largest manufacturers of interior equipment for aircraft in the world. With approximately 30% of the market Iacobucci S.p.A is one of the world's largest manufacturers of catering trolleys.The aim has been to produce a new competitive catering trolley for the airline industry. With customers and users in focus, the project team found that weight, ease of use, ergonomics and design were important aspects. Having a low weight of all the interior is particularly important when there is lots of money for the airlines to save in reduced fuel costs.

In this essay the renewal of the modern sacred art has been examined through the creation of three works of art from the art project ?Kyrkorummet?. The aim has been to show that renewal of the modern sacred art is best accomplished by the combination of the artist history and Bible knowledge and the open mindness of the beholder towards the new and creative, in order to communicate the gospel in modern time.The large extend of the art project demanded a selection of the art works. Therefore, three were chosen and they show the last supper and the baptism in a renewal way including both symbolism and creativity. To complete and facilitate the analyses, a theme, light and water, have been used as well as relevant theories in art history with Kandinsky as main art critic.Through the art project and it?s teaching, history in combination with present time through visits in different and modern churches, thoughts have been stimulated and the result has been new works of art that speaks of our time.

BackgroundToday a common approach to solve a complicated problem is to assemble a temporary workforce in order to solve the problem by working together within a project. One of the difficulties with working in projects is to maintain the planned budget. Working hours and costs are often exceeded. Many companies presume that any certain project will succeed, a presumption that leads companies not to anticipate risks involved in a project. In companies today there is seldom time for evaluation or moderation of a project, in order to have time for evaluation there is a great need for an adequate planning of the project.IntentThe intention with this study is to create a model for planning, budgeting and evaluation of projects within consultancy companies.MethodWith the help of interviews and discussions within the group Hamnar och Byggkonstruktioner at Sweco has evidence to present a proposal on planning, budgeting and monitoring been developed.ResultsA model has been developed to ease for consultancy companies to plan, budget, monitor and evaluate projects.

This project is the result of a cooperation between HalmstadUniversity and EABAB. The aim of the project was to create a macro that would help EABAB automate the process of designing steel trusses. When run in Microsoft Excel, the macro imports and processes coordinates from a calculator program. The data is then imported into the Building Information Modelling software Tekla Structures, which creates a 3D structural model of the steel truss.The macro saves much time in the project planning process and also helps minimize the risk of design flaws caused by human error. .

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

MindMe is an aid for people with cognitive memory impairments. The aid is completely new and has beendeveloped within this bachelor thesis, no product of this nature could be found on the market before. Theidea came from Niclas Jarhäll, CEO of Mutual Benefits. Mutual Benefits were also partners in the project.The project was carried out by us in cooperation with Bachelor of Science in Innovation Engineeringstudents Malin Albertsson and Victoria Hedman at Halmstad university. The aid consists of a mobile phoneand a number of tags.

In this thesis we focus on the issue of crowdfunding and especially how a project relates to and embraces its community. While a lot of related research focus on what makes people give, our research instead delve into whether a creator looks upon the sponsors as something more than just a financial resource. To manage this task we used a triangular perspective consisting of a case study, a questionnaire and a netnographic study. The goal was to gain the perspectives of creators, crowdfunding platforms and sponsors on how the communication between the community and the project works and can be improved.       The three crowdfunding platforms we reviewed (Kickstarter, IndieGoGo, Rockethub) all had fairly similar models on how to attract sponsors and make them involved in the project, while the questionnaire and netnographic study demonstrated how a community could contribute in different ways.

This essay aims to investigate the affects of interaction between different professions ina municipal project. In the project, professional representatives from the social servicesand schools have collaborated with staff in preschool/school and exchanged knowledgeto improve the work around children with antisocial behavior. It is in this essaysambition to create an understanding of how professional practitioners, with a monopolyon certain knowledge, influences the possibilities and limitations of cooperation in amunicipal project. This is examined through six qualitative interviews with members ofan municipal project. By using theories about professionalization, social closure,alliance strategy and social control it is possible to understand how division intoprofessions creates opportunities and limitations of interaction exchange incollaborative projects.

I vår produktion har vi tagit fram ett system för order- och lagerhantering, med vikt på realtidsuppdateringar, åt en extern mottagare där infrastrukturen inte hängt med i företagets utveckling. Vi valde detta projekt i syfte att bredda våra kunskaper inom både programmering och projekthantering. Denna slutreflektion tar upp den förundersökning vi gjorde för att kunna besluta om vilka verktyg vi använde i utvecklingen, den tar även upp vårt sätt att hantera och planera projektet. Under projektet har vi arbetat med en egenutformad arbetsprocess vilken även beskrivs här. --- Our production has been to design a system for ordering and supply management with emphasis on realtime updates to an external recipient, where the infrastructure has not kept pace with the development of the company.

The aim of this project was to create an interior design for a children?s hospital patient room with the concept to adapt the room for the wide target group from 0-18 years of age. The analysis in the project is based on the hospital ward 322 at Drottning Silvias Children?s and Youth Hospital in Gothenburg. It?s an oncology ward where the children are very sensitive for infections and therefore need to be isolated in their rooms for 3-4 weeks.The main goal for the project was to create a room that works as a template and gives the people who lives in it the opportunity to create thier own room based on the personal things they bring into it, and how they decide to furnish and use the room.The result of the project is a template room with fixed furniture that can be transformed due to screens in the room.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

?Historiska Bakverk? is a project about different pastries from a historiacal perspective.The goal was to create illustrations and typography inspired by differentpastries, in order to communicate something about their history and what layunderneath. The project aimed to highlight, understand and acknowlage thepastries as an important part of our history and cultural heritage. Importantquestions I have dealt with throughout the project was in what way the pastriestell us about our history, how it has changed them through time. The result, aseries of posters for croissant, doughnut and pretzel, are a combination of boththeir history and my own experience of them.