The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

AbstractThe aim of this thesis is to investigate an experimental work in the region of Kronoberg and to study, from the actors? point of view, what possibilities there are for cooperation when it comes to hastening the introduction for newly arrived immigrants on the labour market, and also what possibilities the cooperation entails for the newly arrived immigrants to integrate on the labour market. The thesis employs the following research questions to answer the purpose:How do the actors in the project work to fasten the introduction to the Swedish labour market?Which opportunities and obstacles do the actors experience for cooperation in the project?Which consequences do the actors experience that cooperation in the project bring for the newly arrived immigrants? opportunity to integrate on the labour market?In order to answer the questions, ten actors involved in the project have been interviewed. Also written documents have been used.The conclusion of the study is that explicit goal and explicit division of the responsibilities in the project have made the cooperation easier.

This paper is a degree project on the C-level, 15 points at University West, Department of Business and IT dept. Informatics. This study is about agile methodology and its impact on IT projects. Requirements management is a process within an IT project, where customer has certain requirements that must be met by an IT system. The difference between the traditional and agile development is in the requirements management process and it can cause problems in a project.

The title: ?Klara färdiga GÅ? can be translated as ?Ready steady GO?, and is ment as a request to start move. In this project I want to invite people to walk more by creating creative, demanding and playful walkways and paths, where the body can be allowed to work just a tiny bit harder.It?s because walking means exercise and fresh air, for free and without spetial equipment. Walking can also be fun, it allows people to stop, change direction and experience things.I think activity should be fun, inspired by children playground my project is a contribution to how adults might stay healthier in a city, where too often healthy activity is solely confined to the gym or sports fields.

The purpose of this project was to investigate whether it was possible to develop a type of application, where users would solve chess problems. The main goal of the project was that there would exist an functional application after the study has ended with which users could solve chess problems on a computer. One subgoal of the project was to create corresponding application for mobile phones. The study was limited to require users to have at least Internet Explorer 9 +. For other browsers, there were no corresponding limitations.

This study is about an ongoing project in the northern parts of Sweden. Quattro Helix is used as a model for the interaction between four institutional members of the society, in purpose of challenging existing social structures and achieveing community development. The aim is to increase the knowledge about Quattro Helix-model as an approaching method to face the problems in the society through cooperation between Civil society, state, academy and industry. Interviews with eight project members were used as the data-collecting method to capture the perceptions about the project constellations. Information was gathered from two representatives from each of the four actors.

My work deals with large scale design of the urban fringe. The thesis is divided in three parts; ?Current viewpoints?, ?Infra City ? conditions ? and ?Infra City ? project?. In the first part, I go through the history of trade shortly. Then I discuss the concept of nature, which ends up in a linkage between natural science and aesthetics in landscape architecture. The link between those two makes a project stronger and more multifunctional. The object of my case, Infra City, is a mall situated north of Stockholm on both sides of the E4 motorway going to Arlanda airport.

This thesis has been carried out in collaboration with the IT Company MPQ consulting AB in Halmstad. The task we were assigned by MPQ concerned the development of a scooter that can be used year round. We have with the companydeveloped the criteria and requirements for the product in which the goal is toproduce a primary solution that meets the set criteria and fall within the project'sboundaries.The project involves a wide range of different design methods for idea generationand idea development. The project also addresses engineering methods such asprinciple and primary engineering. Occurringmethods in the project include FredyOlsson principle and primary engineering in cooperation with SVID's - Swedishindustrial design process, etc.The final solution will be presented in the form of sketches, CAD models withassociated drawings and a rendering from the program Keyshot..

The term "Project" have become a growing work model that exist in almost all bransches. A project is a work effort made over a finite period of time with a start and a finish to create a unique product, service, or result. Science shows that time limitation has an impact on humans to perform under pressure, which challanges the contributor to deliver. This report contains an examination about project management, both coming from scientific results and an external business. The point of this study is to bring ideas of improvement, which can make the work method more effective in this company..

Http : // en.wikipedia.org / wiki / Life is a book with a life of its own. It is made to raise questions about the importance of the book, and the paper book in particular. It is a design project in which a new design method is being tested and evaluated. The intention of the project is to determine whether a concept can be found and evolved from a chosen subject or not. The aim of the book project is also to investigate if the form and content of the book could be entwined, making it impossible to separate them from each other..

The project is about making a Re-Design of the Swedish Socialistic Newspaper ?Dagens ETC?. The background to the project is my search for commitment when I work with a specific customer or project and how importantthat commitment are?The project was from the beginning split up to three different phases. The meaning of the first phase where to make a re-design mainly based on a interview with Johan Ehernberg, the chef editor on ETC.The second phase was a design totally made of my own idea and creative view as a Graphic Designer.I had in mind to make the third phase based on the result of the first two phases.During phase one and two I reconsidered and decided to skip the third step and put more effort in to the two first ones.

Many research reports mention the fact that a huge number of all system development projects never reach a successful ending; with other words never fulfil formulated goals. By identifying and forming success factors (and in some aspect risk factors) that the project manager in practice can use, this study may be seen as a step in the direction towards minimising the high number of failed system development projects. The purpose of this research report is to investigate how a system development project, where the development process is based on a specific development or process model (in this case the Waterfall model), can and should be driven. I aim to clarify what is demanded of a project leader for the specific development process and give an account for which eventual leadership qualities that can be well suited for given situation in relation to the need for technical competence. Among other things the project manager should inspire confidence, drive, be a decision maker, engage and own some form of basic knowledge in the field of system development.

In 2014-2015 a large-scale Ebola epidemic occurred in West Africa. The Swedish Civil Contingencies Agency was given the order to conduct the Swedish response. The purpose of this case study was to investigate the impact on project planning of the three factors: the nature of the crisis, political initiative and developing countries. In this case study the crisis was an epidemic, and the project was initiated by the Swedish Government and conducted in two developing countries. The results were intended to contribute to developed understanding and recommendations for future project managers in similar projects.

E-Series 450 is a chainsaw designed by Husqvarna AB to the semi-professional user. Husqvarna is a world leader when it comes to chainsaws, trimmers, lawn mowers and garden tractors. The problem in hand can be addressed by the question. ?How easy can we start a chainsaw? The purposehas been to provide a solution to the question above and give Husqvarna a good base of which they can continue towards a finished product.

This thesis describes the processes of establishing wind farms in Sweden. The workcontains a thorough literature review regarding both the establishing process andproject management, including complex project theory. The main part consists of theexecution of 15 interviews with organizations involved in wind farm establishment.The result of these interviews laid the foundation for a process description identifyingdifferent steps and activities in these types of projects. The outcome was thencompiled in a project model, which includes five phases and four processes.When analyzing the project of establishing wind farms from the theory of complexprojects one discovers that the amount of different requirements and stakeholdersnecessitates a systematical and dynamical project structure. Since projects are in needof different types of competences there are also many consultants and contractorsinvolved.