The project Design analysis and proposals of plastic screw caps in Australia was performed at Högskolan Dalarna incooperation with University of Western Sydney, Australia. The Swedish company Tetra Pak, in Lund, were assigner forthe project that was performed 2006-2007. The commission was to do a survey about the packages for non-carbonateddrinks in Australia. The bottles had to be plastic, able to open in one step and with focus on the caps.The project has result in design analysis and a new proposal of a plastic screw cap for the Australian market. Sixbottles were choosen and they were all testet on 20 consumers each with a Likert-scale test.

This study has been carried out in cooperation with Unilever and partly with the EC founded project, Smartdoc IST-2000-28137. In areas of statistics and image processing, both the amount of data and the dimensions are increasing rapidly and an interactive visualization tool that lets the user perform real-time analysis can save valuable time. Real-time cropping and drill-down considerably facilitate the analysis process and yield more accurate decisions. In the Smartdoc project, there has been a request for a component used for smart filtering in multidimensional data sets. As the Smartdoc project aims to develop smart, interactive components to be used on low-end systems, the implementation of the self-organizing map algorithm proposes which dimensions to visualize.

My objective for this project was to create a short but thrilling 2D-animation intended as promotion for an online comic book. The purpose of the project was to learn more about animation and graphics, to further my artistic skills and to learn how to work in Adobe After Effects. I also wanted to learn more about scheduling, project methods and how to handle stress. During the ten weeks of the project I have created the story, the storyboard, the character design, the backgrounds and the animation. The voice over was recorded with the help of a fellow student who also made the music and the sound effects.

IT is a natural part of the work today when it comes to projects. There are many aspects that are wholly or partly dependent on IT support actions to proceed efficiently. Although there is still situations where IT is deselected as a tool. The factors that make it look like this is not always included in the calculation, which resulted in the failure that could have been remedied with the right tools to solve the problems. The project form which today is increasingly common with all major groups involved enables IT tools' impact also becomes an increasingly provided they are used properly.

The project Design analysis and proposals of plastic screw caps in Australia was performed at Högskolan Dalarna incooperation with University of Western Sydney, Australia. The Swedish company Tetra Pak, in Lund, were assigner forthe project that was performed 2006-2007. The commission was to do a survey about the packages for non-carbonateddrinks in Australia. The bottles had to be plastic, able to open in one step and with focus on the caps.The project has result in design analysis and a new proposal of a plastic screw cap for the Australian market. Sixbottles were choosen and they were all testet on 20 consumers each with a Likert-scale test.

This is a non-traditional examination paper written after three years of studies at Malmö University and the Kaospilot Program. It is written in Swedish and in the spring of 2009. It describes a non-linear project based on a process-orientated theory called Theory-U by Otto C. Scharmer (2009). The project aims to investigate the changing conditions of Stage Theatre and deals with non-linearity as phenomena.

This thesis has evaluated environmental classifications of projects and the lessons learned to explore what the possible ramifications of implementing this in the construction and infrastructure are. Companies today are looking to develop methods to demonstrate their environmental commitments, but there is an uncertainty regarding the contribution of environmental classifications in this aspect.The literature review presents the theory of environmental classification, which provides a general knowledge of its function. The empirical data is based on an analysis of existing classification methods and qualitative interviews. The analysis shows specific environmental classification system for the area of construction and infrastructure. CEEQUAL is currently the only environmental classification applicable to Swedish projects and therefore serves as the basis for the continued analysis.

This paper describes a case study of the largest film production ever conducted in Scandinavia. The study aims at explaining the complex relationships in the network structure in which the project took place. Coordination of creative projects carried out in a network context, includes handling conflicting interest and contradictions. Creativity needs space and freedom while projects need structure and coordination, whereby controlling these projects becomes complex. Adding to the complexity, does the loose form of organization that the network structure represents, without any long term structure.

This report describes a thesis project on 15hp. The purpose of the thesis project is to build a laser projector that reacts on sound waves and thus get a laser beam to draw visualizations of sound waves on a wall. The idea was that the design would be independent and not have to be plugged into any audio equipment. This was achieved by absorbing sound waves into a microphone. Another factor was to get a ?do it yourself? -feeling of the design and therefore it was chosen to be constructed using for example, old hard-drives.The result was a relatively large and bulky designed laser projector that can draw sound waves on a wall..

Our education at Halmstad University was completed with a degree project. Our task was to improve an already existing pneumatic damper to Nederman in Helsingborg. Overall we have made necessary calculations to make the design of the existing damper smaller. When these calculations were done, we moved on with an analysis of the existing damper in order to figure out what improvements could be made on each part of the damper. The result of this project is a smaller and a more supple design of a pneumatic damper. To this we have also created complete drawings, calculated material expenses; we have also created an assembly of a pneumatic damper in Catia v5..

Projekt har blivit en allt vanligare arbetsform i dagens organisationer, men trots arbetsformens ökande popularitet inom flera olika sektorer så är det inte ovanligt att problem uppstår i samband med ett projekt. För att erhålla en ökad kontroll över ett projekt har därför sofistikerade projektstyrningsmetoder utvecklats, främst av militära myndigheter i USA. Syftet med denna uppsats var att beskriva hur en av de framtagna metoderna, EVM, kan vara ett verktyg för projektstyrning och hur metoden bör implementeras. Vi har också undersökt vilka problem som kan uppstå vid ett byte av projekstyrningsmetod. För att uppnå syftet med uppsatsen har vi genomfört en omfattande litteraturstudie samt en fallstudie på SSAB Tunnplåt i Luleå.

Mechanical scaling is one of the most complex operations of all in the mining process. The operators are using both hearing, sight and feel to read the rock and to know where to scale and where to leave. They say they go on gut feeling in great extent, something that comes with experience. The scaling machine is placed into the edge of unsecured and newly blasted rock to hammer off the blocks that has become loose after the blast, but not enough to fall down. It goes without sayingthat it is a risky job.

The purpose of this paper is to standardize and simplify the design work on a few specific types of storage brackets for balconies. The company Balco AB had the wish to simplify the design work in the preparation of attachments to their balcony structures. This would be done by a calculation matrix that could be produced which then in turn could be used for each new project by the company. The design work behind the development of these fittings at each new project is costly both in terms of time devoted by each calculation but also the cost of the time. The purpose of this report is that in a systematic manner, a calculation matrix can be created that then the company instead may follow from each new project.In carrying out the project used HILTI calculation program, which was provided by the company HILTI.

The aim of this project is to study the work that has been done by the youth welfare to prevent accidents and to increase the preparedness in case of fire. Further the aim is to develop a basis to improve the interaction between the fire services and the youth welfare. The conclusions that were made during the project can be used to increase the safety of the environment that estates by the youth welfare..

During the spring semester of 2009 I have participated in what was to become the project The Allotment Plot; a collaboration between the Swedish University of Agriculture and the Wanås Foundation. As one of six students in landscape architecture I have experienced a group based learning process with the point of departure in the designing of an organic and experimental kitchen garden at Wanås, a sculpture park for contemporary art. The project came out as neither us nor any other of the people engaged could have guessed. What was meant to be a garden turned out to become an entire cultivation movement. As students, we have gained a lot of experience through praxis; experience that will be valuable for our future profession. The project has also opened up the possibility to question and reflect upon what our profession and education could or should be about. This thesis focuses on the role of communication and the production of communicative tools in design processes and landscape architectural practice. It discusses how communication may be used in an exploratory and ?un-securing? way, and how this may dislocate the professional role, especially in situations where the design action, as in the case of this study, demands a high degree of transdisciplinarity and collaboration. .