The actual project presents the development of a testing rig for a steam engine. A short overviewabout the development of steam engines is presented, until arriving to the development of thepresent engine, which will require to be tested in different ways.The testing rig studied on this project (based on a Lanchester engine) will be used to testdifferent materials and layouts for the group Piston-Cylinder.The engine is a high performance steam power engine, which is going to have a highpower/dimensions ratio, what will lead to require high performance components and materials.An introduction to the testing rig is presented, and the entire design project is done in order toreplace the disappeared documentation of the current testing rig, built on the 1970?s. Also somemodifications done in the original testing rig are presented, as well as some detected problemsand their possible solutions..

The objective of this project was to develop an application for mobile phones using the Android operating system. The main goal was, with the help of GPS, to pinpoint locations, measure distance traveled and illustrate the progress on a map. Functionalities for just showing the map, fetching addresses and saving to a database was also implemented. The result of the work was a proper application, called MeasureApp, that fulfills the goals set in the planning stages of the project. MeasureApp can be used to measure distances where accuracy is not a main factor, i.e walks or runs.

The main purpose of this Master´s thesis, is to describe and discuss what constitutes the library collaboration between The Swedish Royal Library and the National Library of Guatemala, but also to analyse which effects the support has for public library work in Guatemala. The data consists of interviews and direct-observations during 2 months of fieldwork in Guatemala, Central America. The analysis is based on literature studies combined with the answers from the respondents and other results from the field work. We have found above all three factors to be of importance in the constitution of the collaboration between the National Library in Guatemala and the Swedish Royal Library: the Swedish library discourse, the Swedish aid discourse and the relationship between the people involved with the project. The library discourse in Sweden and in Guatemala emphasizes different aspects of the work.

This is the final documentation of the basis that can be the foundation of how to solve theproblem with leaking hydraulic oil in a shoe press at the company Albany InternationalAB in Halmstad, Sweden.The project has been performed at Halmstad University as a degree project commissionedby Albany International AB. The purpose of the degree project was to find a way ofdetecting the hydraulic leak of a shoe press. The reason is that the shoe press runsunattended during nights and weekends, this can cause an extensive decontaminationwork and production stop if leak. The hydraulic oil could be leaking in large amounts orslowly as a fine mist. The development of a working system that can detect a hydraulicoil leak and stop the machine before a large amount of hydraulic oil leaks out wouldconsiderably reduce the cost of the decontamination work.

Many IT projects that have been developed in recent years are often considered to be unsuccessful. According to a study by Exido up to the 72% of all IT projects are considered to be failed. A failed IT projects means that the organizations that have ordered the new system may have higher costs or/and the system will not be ready in time. If costs are too high the new system might not be installed in the organization or if the system is not completed within the specified time frame the organization can become stagnant.In this paper we conduct an investigation of the failure of IT projects there we will examine where, in the systems development lifecycle four different phases, projects fail. We will conduct an empirical study of each phase, where we describe the key steps in the process; we will also investigate failed IT projects that are linked to the current phase.

This project has created a web-application for the service technicians at the paper plant Gruvön. The project was outsourced to the IT-company Sogeti.The application visualizes information about reparation-work of the equipment at the paper plant. The displayed information is work-orders, the status of the work-orders and errors. It is also possible to see the costs and hours spent on reparation-work.. The work-orders and related information is stored in a relational database.The application is created mainly for web-browsers in mobile-phones and tablets.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

With a starting point in a project for reinforcing small scale business among immigrants in Sweden, carried out within Swedish for immigrants (sfi), the aim for this thesis is to examine the project from the view and experiences of the participants. Interviews with participants in the project have been inspired by the teoretical and methodological views of Grounded Theory.The interviews show that some participants want to start their own business, but almost as many don?t have that dream. The former group all have experience of being self-employed. They are aware of the difficulties but are nevertheless determined to proceed their dream.

Ecolean Development AB are developing and manufacturing filling machines for pasteurized liquid food products. Because of lack of any appropriate supplier of box closer which seals boxes with small flaps, they have decided to start a project to develop a prototype of a box closer. Due to long experience from industrial automation I have been given a chance to develop control system for a box closer. Degree thesis involves electric design in ELPROCAD ic PRO and programming of PLC (programmable logic controller) and HMI (Human Machine Interface). The report describes degree project from the project plan phase via the development phase to the conclusions.

The purpose of ?The Lake? was to create an experience with music and visuals working with no budget.A personal purpose was that I wanted to explore new areas in design, like scenography, and combine them with my previous knowledge and skills. My method was to keep my hands busy at all times and use new materials. I also wanted to work with other creators and learn from their methods. Together with a musician I created the music and the concept for the project.

This project practise methods used in the interaction design discipline to develop a concept related to the Swedish Guinness World Records Magazine. This project is a challenge to accommodate both the users? and client?s needs. We focus on interaction and the experience, which is acquired through the use itself, and how to connect it to a theme from a client. The aim of this project is to create a meeting place for children where they can interact with technology.

This study looks into the possibility, and profitability, of expanding a pilot project that has been put into action at GGP Sweden AB in Tranås, a manufacturing company that produces front mowers. The pilot project is meant to give GGP Sweden AB a more precise control of the flow of goods from their suppliers, and its essence has proven to be quite similar to the Japanese Just-in-Time philosophy.The study has been divided into four separate areas; mapping, supplier selection, supplier evaluation and cost analysis. These areas represent a holistic perspective on the expansion of the pilot project and cover topics varying from methods of finding suitable JIT-suppliers, constructing Key Performance Indicators (KPI) to reviewing costs and assessing profitabilities.In this report, the reader will initially take part in the works of mapping GGP?s manufacturing unit, pilot project and supplier base, which results in a list containing the most suitable suppliers for a Just-in-Time based collaboration. Afterwards, the reader will be led into the area of supplier evaluation, where five KPI?s are created with the purpose of ensuring that GGP will be able to evaluate their suppliers and pilot project in an effective way.

Internal communication is an important factor in organisations today. For many system development teams it?s critical that the communication works well. Without communication, success would be impossible. This study aims to highlight the effect communication has on the members of agile project teams.

This is a thesis report from SLU in Skinnskatteberg, the Swedish university of agricultural sciences. This study is an evaluation of a course in attitudes and behavior for participants of the ETT- project led by Skogforsk, the forestry research institute of Sweden. They do research for the benefit of Swedish forestry. The ETT-project is a project where there are both 74 tons ST-trucks and 90 tons ETT-trucks in test on the public roads. This study is concentrated on the ST-trucks and their drivers, company owners and logistics managers. The evaluation is done by interviews with the various participants.

This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.