This master thesis has been performed at the department of Machine Design at KTH, The Royal Institute of Technology. The thesis has been a part of a global development project in collaboration with Luleå University of Technology, Lund Faculty of Engineering and Stanford University. Corporate liaison and sponsor has been Immerse Global Inc. The project was also performed on sponsorship from the Product Innovation Engineering Program, PIEp. The thesis is a representation of some of the contributions made by the authors.The lack of clean drinking water is one of the key issues facing the world today.

In this project the focus has been on the system for recombination at Oskarshamn 2. The recombining systems have on several occasions switched paths due to low pressure before the last ejector that?s feeding the recombiner. Of the mentioned reason, events and several measuring points have been analyzed in this report since the installation of the recombining systems.In order to prove theories and demonstrate what may be the cause of this problem, we used heat balance calculations by the program Probera. Using the program, we can demonstrate that the catalytic process does not reach the desired temperature with the amount of combustible substance.

During this project a photographer and an illustrator have explored if a single image can communicate a bigger whole, in this case a movie. By analysing five motion pictures with visual communication theories, semiotics and colour symbolism as tools, ten images was created. These images do not only consist of symbols, but also communicate the overall feeling and colour scheme of the movie.These images have been tested in interviews with six individuals, who, except for one, work with visual communication of some kind. They have studied the communication skills of the images from their own experiences.The result of the interviews showed that all images could not communicate a movie. One reason for this was that only a few of the test persons had seen two of the selected movies.

Den teoretiska bakgrunden tar upp self-efficacy som begrepp och dess betydelse för medarbetare och organisation. Syftet med studien är att undersöka om samband finns mellan self-efficacy och interaktion mellan medarbetare och chef. Self-efficacy mäts med GSE, i översättning av Koskinen-Hagman et al (1999), medarbetar-chefsinteraktion mäts med egenkonstruerade frågor i samma enkät i syfte att undersöka relationerna avseende bl a nöjdhet, chefsnärvaro, kontaktfrekvens, problemlösning. Deltagare består av 58 medarbetare från samma organisation varav 83 % är kvinnor. Studien visar att samband finns mellan self-efficacy och hur medarbetare uppfattar interaktionen med sin chef avseende närvaro, nöjdhet samt hur medarbetare själva agerar vid problem på arbetet.

The aim of this study is to describe and analyze how the European union relates to the different dimensions of abortion. What kind of problem is abortion and whose right is it? Does difference framings of the problem enable different solutions?By analyzing debates from the European parliament through Carol Lee Bacchis method ?What?s the problem approach? I have come to see that different representations of a problem changes the problem it self. This emphasis that a problem is a problem in one context, but not in an other.Depending on the work of, among others, Barbara Hobson and Ailbhe Smyth I have focused upon the European union as a economical project, leaving social issues to national competence. This makes the EU a patriarchal project that fails to guarantee women?s rights.

The purpose of this thesis has been to investigate the effect of introducing the qualitystandard ISO 9001:2000 at Metso Paper Service in Sundsvall. The investigation has been focused on implementation of the new method of work, Continuous improvements. The implementation has been studied in a case study with both a qualitative and quantitative method. Continuous Improvements is a way of working focused on continuously increasing the efficiency and having the purpose of achieving the formulated goals. This is often accomplished by the organisation carrying out the changing process to a great extent in small but efficient teams.

This report describes an examination project made for the IT consultingcompany Sogeti. The purpose of the project was to develop and modify the translation tool Language Manager (LM) built by Sogeti to be used for translating applications. Employees at Sogeti considered some disadvantages with Language Manager, version 1.0 which among others was that language files for projects were saved at two locations. Partly in resource maps among with the source code of the applications and partly in a database. This was dual work for employees at Sogeti and it also caused redundancy inthe system.

Syfte och frågeställningarSyftet med studien var att undersöka olika alternativ till organisation av futsal i Sverige inom och utanför Riksidrottsförbundet (RF). Jag har använt mig av följande frågeställningar: Hur organiseras futsal internationellt? Vilka alternativ finns till organisation av futsal inom RF och vilka för- och nackdelar har dessa? Vilka alternativ finns till organisation av futsal utanför RF och vilka för- och nackdelar har dessa? Hur ser organisationen av futsal ut i Norden? Hur har andra nyligen etablerade idrotter organiserats i Sverige och varför?MetodStudien bygger på åtta kvalitativa intervjuer med personer som representerar skilda idrottsorganisationer med betydelse för organiserandet av futsal. Intervjuerna är genomförda med en hög grad av strukturering och en låg grad av standardisering.ResultatDen internationella situationen med två skilda organisationer för futsal påverkar de nationella organisationsalternativen. Det alternativ som är aktuellt i dagens läge inom RF är inträde i Svenska fotbollförbundet (SvFF).

In my degree project, I explore the importance of distance and how our perception of distance is affected by our experiences.During my investigatory work I studied the relation between distance and experiences. Among other things I concluded that distance can refer to several different kinds of distances (for example spatial, temporal or social distances) and that experiences are what you?ve learnt of these distances. The importance of distance can be illustrated by highlighting the effects of the distance, i.e. experiences.My degree project resulted in a pair of interactive binoculars which are used for looking at an virtual world of illustrations in 360°; a world of illustrations where distance and the importance of distance is shown..

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

Many enterprises have shortcomings in the transfer of information between different departments. Furthermore, routines for maintaining knowledge in order to be able to use this experience in the future are often lacking. Time and resources spent on improving these systems and procedures can provide significant benefits in terms of saved time and reduced costs in the later stages of a project. The benefit of this is not only a greater clarity and a reduced risk of misunderstandings, but also the preservation of knowledge that would otherwise be lost.The aim of this study has been to examine the process of information transfer and the transfer of knowledge between the calculus department and production manager in projects at Erlandsson Bygg i Öst AB. An additional aim was suggestions for improvements in the calculation handover and at the end of a project, where it was possible.The study was primarily conducted through literature studies and interviews.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

Syftet med uppsatsen var att undersöka vad som gör att en användare vill använda SMS i en organisation och vilka faktorer som påverkar användandet av detta system, det vill säga acceptansen av att använda det. Då denna typ av system är relativt nya tyckte vi att detta var ett intressant ämne att undersöka, samtidigt som vi ville se vilka faktorer som påverkar användaren i avseende till användning av ett specifikt SMS-baserat system. Det kan även vara intressant för företag som vill implementera eller utveckla den här typen av system. Utifrån syftet bestämde vi oss för ett visst tillvägagångssätt som vi skulle använda oss av för att kunna få svar på våra frågor. Tillvägagångssättet var att leta i den litteratur vi haft på tidigare kurser inom det systemvetenskapliga programmet för att hitta en teori som kunde ge oss stöd för ett resonemang.

The thesis work of 15 credits has been performed to interest of Norrtälje ElektronikPartner AB (NEP) in Norrtälje. The aim of the thesis was to develop a prototype for an integrated digital multimeter, designed for one of NEP's proprietary test systems. A digital multimeter module according to NEP's requirement specification, such as physical size and accuracy should be constructed. The module should be able to measure current, voltage and resistance.The final circuit was based on the chosen analog to digital-converter, Maxim integrated´s Max134, which is the main component of the circuit for this instrument. A circuit diagram and PCB layout were made. The result of this project is a constructed DMM board.