Building Automation Systems in commercial buildings are often designed and installed by different contractors, using equipment and components from different manufacturers. The lack of an accepted communication standard has resulted in a few different standards. Many manufacturers of building automation systems only support one, a few or none of these standards, while developing proprietary system solutions. Regin, who develop such equipment, are planning to adopt an open communication protocol specially designed for building automation - BACnet. As a step in that direction this thesis was announced with the purpose to investigate the possibility to implement BACnet in one of their products and to gain more knowledge of the BACnet protocol.

Kulturvårdscentrum was a project that had great significance for local folklore societies in Bohuslän.Bohusläns museum was i charge of the project that lasted from 1987 until about 2001 when most ofthe original staff have retired. The staff was mainly recruited from a large shipyard, Uddevallavarvet,at it's closure due to recession. Financing was largely made by the government to help outthose unemployed who otherwise should have a hard time finding a new job. At start there was about25 employees who where trained for one year by staff from Swedish museums, conservation studios,and teachers the university. The education was aimed at serving local folklore societies, and dealingwith their special problems.

Construction companies are frequently criticized for high prices and long construction time. At the same time, statistics shows that construction workers are on the sick-list for occupational injuries or casualties more than other groups at the labour market.Skanska built a block of flats with tenant-ownerships in Gävle. The construction consists of concrete walls with in-fill walls in the front. The purpose with this degree project is to perform a risk analysis in work environment with focus on repetitive strain injuries and control the time report for in-fill walls manufactured in a field factory. The result of this project will help to make more realistic cost predictions in the future.This degree project has been performed in cooperation with the construction company Skanska.

The investigation has taken starting point in the Swedish school history by a look back at the last three curricula and its rating system in order to see the differences and similarities between them. Furthermore, the focus was on the implementation of lgr11 and how it has worked out both on the national and local levels, with the help of, among other things Imsens "five faces of the curriculum" and Lipsky theories of grassroots bureaucrats. The aim of the study was to investigate teachers' perceptions of differences in teaching and assessment in grades 7-9, during the changeover from Lpo94 both on lgr11.The questions developed for this purpose was: How do teachers say that their teaching changed in conjunction with curriculum change? Has there been a refocusing about the concept of knowledge in the curriculum shift, and if so, how?How the assessment and grading did change with the curriculum change?Data collection has been made using a quantitative survey with qualitative elements. The survey consisted of 10 questions that everyone faces the transition to lgr11.

This report presents thesis of Liisa Kokkonen in collaboration with Muovikilpi Oy.The project?s goal is to find a new construction for an existing lamp made of acrylic. Form and design retains and the manufacturing occurs at Muovikilpi Oy. The project contains the new construction and manufacturing of the lamp and also a proposition for a set with floor and wall lamp.  The paper gives an outline of acrylic as material and how it reacts with light.

The purpose of this thesis is to try to find out what effect subject oriented projects like Energiutmaningen has on the teachers, with a focus on teachers? physics education. What was the experience for the teachers who participated and what effects did the project have on them. Four teachers were interviewed through qualitative interviews. From the result it showed that the most experienced teachers, who have been teaching physics for many years, gained a new perspective of their teaching, through their participation a development showed in their education.

Titel: Innovate or Stagnate! ? Open innovation in manufacturing small and medium-sized businesses in Småland.The purpose of the study is that, from a leadership perspective (innovationmanagement), create a better understanding of open innovation in manufacturing small and medium-sized enterprises. The study therefore intends to contribute to the understanding of how open innovation processes leads to greater innovation in manufacturing small and medium sized businesses.We have used a qualitative research method and adopted an abductiveapproach. We made interpretations and created meaning based on our research results.Our theoretical framework is based primarily on Chesbroughs (2003) research on open innovation. Based on this model, we have selected a number of other theories, which we perceived as prerequisites for small andmedium sized companies in open innovation processes.

During 2001-2002 a prototype, IMIS (Integrated Mobile Information System) was developed at BTH (Blekinge University of Technology) to demonstrate how mobile IT-systems can be used in healthcare. The prototype was based on the activity theory of Engeström. An ongoing project started in spring 2003. The purpose of the project is further development of IMIS with special focus in the diabetes healthcare. Participants in the project are scientists and students at BTH, ALMI Företagspartner, Blekinge FoU-enhet, Barndiabetesförbundet Blekinge, Blekinge Diabetesförening, Vårdcentralen Ronneby and Vårdcentralen Sölvesborg.

Rapid development in the realms of electronic publishing has had a profound impact on information services in general and the academic library in particular. Since mid 1990´s an increasingly number of scholarly journals and other information resources have been made available electronically. Electronic books are the newest electronic service in the hybrid library and can be seen as the third wave in the digital library. Although electronic books have for a long time existed as electronic texts such as digitalized classics or other texts in the public domain, it is not until recently that e-books have been distributed and packaged in a commercial form. As more e-book models are being developed, libraries are being forced to take e-books into consideration when planning their information services.The aim of this master thesis is to describe the first stage of implementation of the new electronic media, the electronic book or e-book, in Swedish academic libraries.

This research project is about how the subjects` art and music has been described under the 20th century in the Swedish school until today. The purpose with this research project is to do a text analysis that describes these subjects now and the last century, to illustrate the differences between today and the last century. Hence the size of this subject I have chosen some random samples out of the 20th century until today. I started to take these random samples from the first lyric I found about these subjects, and continued with these random samples in other lyrics from the middle of the 20th century until the year 2006. I just took these random samples from what I had found because I did not found some lyrics from earlier period of the 20th century.

This project aims at investigating if the use of UML as a support to small-scale development ofan embedded system is relevant. The investigation is conducted by using UML during the initialphase of the development ofTelfafill, a filling machine by the company ?Telfafill AB?. The aimof the development of Telfafill is to separate the user interface from the control unit. In additionto this main objective, Telfafill AB would like possible changes to, and additions of,functionality of the filling machine to be investigated.Within the boundaries of this project, the development of Telfafill reached a full requirementspecification of the proposed system, and contact was made with potential external developers.No prototype construction had been started when the project ended.

This two year master thesis reviews the possibilities for how public libraries and geriatric care can cooperate on a long-term basis. By using a project called Prosit the study shows which approaches and actions that worked in order to create this kind of successful collaboration, and which ones that didn't.The theoretical framework consists of the sociocultural perspective developed by psychologist Roger Säljö in meaning to emphasize how these two departments can learn from each other. The theory also underlines the fact that both public libraries and geriatric care can develop their own way of improving the elderly?s daily life by working together. The thesis method is qualitative and based on Virginia Braun and Victoria Clarke?s thematic analysis.

This thesis will show you how to build and construct a interactive website with a web shop and a web based administration system. The website is developed for a company called Varett. Varett will use the website to reach out for a larger group of customers and also for promoting new products. I have develop this site mainly using ASP, MS Access and HTML. I have also developed a graphic profile for the company to use at the homepage and at other commercial products.

This paper presents the result of a master thesis project at 30 Hp, master of industrial engineering at Luleå University of Technology. The project was performed during 20 weeks, spring 2014, in collaboration with ABB Control Products in Västerås. The aim of the project was to evaluate two half-automated assembly lines for a new generation of contactors, the NAFC assembly lines (New AF Conductor). The aim and purpose of the project was achieved by answering the following questions:? How are the ergonomic working conditions at the NAFC assembly lines during spring 2014?? Which areas at NAFC assembly lines can be improved for the work environment?? How can the ergonomic work conditions improve at the NAFC assembly lines?Literature reviews were performed from earlier research papers and articles of the ergonomic, musculoskeletal and work environment subject, from where a number of chosen methods and tools were used to perform the ergonomic evaluation.

The purpose of this project is to examine the development of the upper secondary school physics course and from this get a better understanding why the course is organized the way it is today. The timeless argument for studying science in school will begin this essay. After that the reader will be aware of when important discoveries in physics were made. Then school history is presented. In this part we are told when the first school started in Sweden, but the focus lies on the upper secondary school and the physics course.