The basis of the study lies with a newly patented gearbox by cardiologist and inventor Stig Lundbäck. Stig founded CorPower Ocean AB to further develop the gearbox to be used in a wave energy device. The purpose of this project is to develop a concept of a lifting system with CorPower Oceans gearbox that is more energy efficient than a hydraulic lifting system. The goal is to use technology from CorPower Oceans gearbox inversely to perform heavy lifting as an alternative to hydraulics. The project is limited to applying the gearbox and gear rack on a forklift with a lifting capacity of ten tons.The main tool in this project will be the product development process Systems Engineering where only the most relevant parts will be used to develop a concept.

Att utveckla ett program som lyckas uppfylla alla förväntningar som en användare kan ha är svårt.Att utveckla ett program som lyckas uppfylla vissa av alla de förväntningar en användare kan ha ärbetydligt mycket lättare. Men att kunna hitta just de egenskaperna som gör att en användare inteblir besviken utan nöjd med ett program är en svår process. Ett sätt att hitta de egenskaperna kanvara genom att nyttja en användarcentrerad metod som extrem programmering. Agil utvecklingoch extrem programmering har som område fokuserat relativt lite på användarnöjdhet som måttför att avgöra om ett program är lyckat eller ej.Med detta som bakgrund har ett utvecklingsprojekt tagit form med syfte att utveckla ettmodelleringsverktyg för analysmetoden FRAM. I detta projekt har en metod bestående av delsförebildsanalys och agil utveckling legat som grund.

HMS Networks AB develops, produces and sells communication technology for industrial automation. The product handles communication between a variety of protocols. The product treated in this project is an Anybus X-gateway Modbus-TCP Master/Client and this module is currently configured from a web-based interface. In doing so, the flexibility for handling protocols is limited to what the company chooses to add to the interface. Therefore the company had a request that the flexibility should be extended using a script language.

The purpose of this study is to understand the factors that are affecting students at the Technology and Electricity- and energy programs in their choice of studies and vocation. The study is a comparative case study and quantitative method has been used in the form of questionnaires. The result shows that students do not like to be affected by another person but believes that they themselves have made their choice. Interest turns out to be the biggest influence factor of choice for both students at the Technology and Electricity- and energy program. For Electricity- and energy students have also access to work had some impact.The parents' education level was higher for Technician students and their parents worked with occupations requiring university degrees.

The following is an explorative work on various forms of collaboration. The core of our exploration revolves around the idea of co-operation as a tool for examination, a collective working method, the input/output within creative practices as well as a phenomena in its own right? It is however not ?simply? about collaboration, but rather places as much focus on a highly personal search for new working methods, new approaches towards research and on the development of our relationship to graphic design. From beginning to end, the entire project has become a work whereby the term ?we? has been more important than ?me? ? a well-functioning project with a common purpose: a collaboration, between us..

The project Easy Battery Handling - EBH has been carried out in our auspicial and completedfor Devantini Corporation, a development company in Halmstad with its main concern inenvironmental friendly innovations.EBH has solved one of many technical challenges in one of Devantini corporation?s largerprojects. This main project involves the development of an electric powered formula racingcar. The part of this car that involved EBH was the battery handling to guarantee safe andquick battery exchanges during pit-stops.The solution became an entire battery module, hanging on the side of the car on two spearspointing out from the car. The batteries are exchanged by a specially designed trolley that isinserted under the battery module.

Detta examensarbete behandlar undervisningsmetoden infärgning. Infärgning kan beskrivas som en metod att öka intresse, motivation och förståelse för kärnämnen på yrkesförberedande gymnasieprogram. Rent konkret består metoden i att man använder kunskaper och annat som anknyter till elevernas karaktärsämnen som en del av sin kärnämnesundervisning. Nödvändigheten av detta visar litteratur, skolverksutredning samt styrdokument på. Syftet är att undersöka huruvida infärgning av ämnet samhällskunskap i en klass på ett yrkesförberedande program kan leda till ökat intresse, motivation och förståelse för ämnet.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

The public transport network in Täby commune consists currently of two types of bus line of whichboth belong to the category of feeder lines. The first type terminates at Danderyds sjukhus and feedsto the subway whereas the second type terminates at Täby centrum and feeds to Roslagsbanan, asuburban narrow-gauge railway system in northern Stockholm. The trunk bus line that connectsgreater parts of the commune with Danderyd is the ring line 604 and goes both clockwise (604H) andcounterclockwise (604V). The main negative aspect of this structure is the complicity in incorporatingit timetable-wise with other bus lines that share the same route, such as through Enebyberg.The goal of this project is to investigate the possibilities of splitting ring line 604 and connecting theends to two different bus routes that terminate at Täby centrum today. Apart from easing thecoordination with other bus lines through Enebyberg, the extension also creates new directconnections from various areas in Täby to Danderyds sjukhus.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Current technology offers many possibilities for remotecommunication. Nevertheless, people with cognitive and communicativedisabilities have limited access to common communication technology like textmessaging via a mobile phone. This study is part of the project Text messagingwith picture symbols - a possibility for AAC users and people with cognitiveimpairments. Semi structured interviews were used to investigate three menand four women?s experiences of using Windows mobiles with adaptedfunctions for text messaging.

This project examined the possibility to create an electronical aid with the purpose of increasing environmental awareness and to design the aid in a fashion that inspires other to develop similar applications. The impact of car traffic was examined, and the base of the aid was built up in modular form to simplify the hardware aspect. For the active, data processing part of the aid the Arduino platform was chosen because of its simplicity and big possibilities of help in different internet fora, for those who choose to create similar applications in the future. The main part of the project var the use of real-time information from the car?s on board diagnostics.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

This Bachelor?s thesis consists of two parts; one with prefabrication (prefab) in focus and thesecond part includes detail design of a house project. These parts are linked together by designingsome parts of the house project as prefabricated.The focus section investigates how prefabrication can act time-, costs- and environmentallyeffective to a building project. This is investigated by combining literary sources with sourcesbased on reality in the shape of interviews. The result of the investigation is that prefabcould acteffectively on previously mentioned factors,if this way of building is used in a proper way.The detail design of the house started in a residential area with a new local plan in Huddinge,named Sjöängen II.

Over the past decade, the fashion industry has experienced a relatively high rate of consumption with material and clothing becoming increasingly subject to waste and disposal. As a result of the increased awareness within the industry the interest in CSR (Corporate Social Responsibility) amongst retailers has increased substantially in an attempt to shy away from the critically amplified media attention. In addition the underlying demand from external stakeholders has forced companies to ensure they focus and act upon each stage of the product life cycle.This study provides a further in depth analysis of the fashion industry and conveys the key messages and steps that firms are taking in response to the external pressures and requirements based on four different merged process areas. This research paper examines the impact of CSR on two Swedish fashion retailers Åhléns and JC and shows how accountability relates to the external expectations and norms that prevail in society. The result shows that the firms do meet the demands within each sub category as a response to market demands.